본문 바로가기
KERD
논문KCI 등재

Do conventional glass ionomer cements release more fluoride than resin-modified glass ionomer cements?

2

조회

0

다운로드

0

인용

0

참고문헌

키워드

주제분류치의학

초록

Objectives: The aim of this study was to evaluate the fluoride release of conventional glass ionomer cements (GICs) and resin-modified GICs. Materials and Methods: The cements were grouped as follows: G1 (Vidrion R, SS White), G2 (Vitro Fil, DFL), G3 (Vitro Molar, DFL), G4 (Bioglass R, Biodinâmica), and G5 (Ketac Fil, 3M ESPE), as conventional GICs, and G6 (Vitremer, 3M ESPE), G7 (Vitro Fil LC, DFL), and G8 (Resiglass, Biodinâmica) as resin-modified GICs. Six specimens (8.60 mm in diameter; 1.65 mm in thickness) of each material were prepared using a stainless steel mold. The specimens were immersed in a demineralizing solution (pH 4.3) for 6 hr and a remineralizing solution (pH 7.0) for 18 hr a day. The fluoride ions were measured for 15 days. Analysis of variance (ANOVA) and Tukey’s test with 5% significance were applied. Results: The highest amounts of fluoride release were found during the first 24 hr for all cements, decreasing abruptly on day 2, and reaching gradually decreasing levels on day 7. Based on these results, the decreasing scale of fluoride release was as follows: G2 > G3 > G8 = G4 = G7 > G6 = G1 > G5 (p < 0.05). Conclusions: There were wide variations among the materials in terms of the cumulative amount of fluoride ion released, and the amount of fluoride release could not be attributed to the category of cement, that is, conventional GICs or resin-modified GICs.

Abstract

Objectives: The aim of this study was to evaluate the fluoride release of conventional glass ionomer cements (GICs) and resin-modified GICs. Materials and Methods: The cements were grouped as follows: G1 (Vidrion R, SS White), G2 (Vitro Fil, DFL), G3 (Vitro Molar, DFL), G4 (Bioglass R, Biodinâmica), and G5 (Ketac Fil, 3M ESPE), as conventional GICs, and G6 (Vitremer, 3M ESPE), G7 (Vitro Fil LC, DFL), and G8 (Resiglass, Biodinâmica) as resin-modified GICs. Six specimens (8.60 mm in diameter; 1.65 mm in thickness) of each material were prepared using a stainless steel mold. The specimens were immersed in a demineralizing solution (pH 4.3) for 6 hr and a remineralizing solution (pH 7.0) for 18 hr a day. The fluoride ions were measured for 15 days. Analysis of variance (ANOVA) and Tukey’s test with 5% significance were applied. Results: The highest amounts of fluoride release were found during the first 24 hr for all cements, decreasing abruptly on day 2, and reaching gradually decreasing levels on day 7. Based on these results, the decreasing scale of fluoride release was as follows: G2 > G3 > G8 = G4 = G7 > G6 = G1 > G5 (p < 0.05). Conclusions: There were wide variations among the materials in terms of the cumulative amount of fluoride ion released, and the amount of fluoride release could not be attributed to the category of cement, that is, conventional GICs or resin-modified GICs.

참고문헌 (37)

  1. Mungara J, "Comparative evaluation of fluoride release and recharge of pre-reacted glass ionomer composite and nano-ionomeric glass ionomer with daily fluoride exposure: an in vitro study", J Indian Soc Pedod Prev Dent, 31, pp.234~239 (2013)
  2. Upadhyay S, "Comparison of the amount of fluoride release from nanofilled resin modified glass ionomer, conventional and resin modified glass ionomer cements", J Dent (Tehran), 10, pp.134~140 (2013)
  3. Markovic DL, "Fluoride content and recharge ability of five glass ionomer dental materials", BMC Oral Health, 8, pp.21~ (2008)
  4. Wilson AD, "A new translucent cement for dentistry. The glass ionomer cement", Br Dent J, 132, pp.133~135 (1972)
  5. Neelakantan P, "Fluoride release from a new glass-ionomer cement", Oper Dent, 36, pp.80~85 (2011)
  6. Shiozawa M, "Fluoride release and mechanical properties after 1-year water storage of recent restorative glass ionomer cements", Clin Oral Investig, 18, pp.1053~1060 (2014)
  7. McLean JW, "The clinical development of glass-ionomer cements III. The erosion lesion", Aust Dent J, 22, pp.190~195 (1977)
  8. Levallois B, "In vitro fluoride release from restorative materials in water versus artificial saliva medium (SAGF)", Dent Mater, 14, pp.441~447 (1998)
  9. Tiwari S, "Comparative evaluation of fluoride release from hydroxyapatite incorporated and conventional glass ionomer cement: an in vitro study", J Indian Soc Pedod Prev Dent, 30, pp.284~287 (2012)
  10. Qvist V, "Resin-modified and conventional glass ionomer restorations in primary teeth: 8-year results", J Dent, 32, pp.285~294 (2004)
  11. Qvist V, "Fluorides leaching from restorative materials and the effect on adjacent teeth", Inter Dent J, 60, pp.156~160 (2010)
  12. Hattab FN, "Fluoride release from glass ionomer restorative materials and the effects of surface coating", Biomaterials, 22, pp.1449~1458 (2001)
  13. Diaz-Arnold AM, "Short-term fluoride release", uptake of glass ionomer restoratives, 1995, pp.11, 96~101
  14. Dionysopoulos D, "Fluoride release and recharge abilities of contemporary fluoride-containing restorative materials and dental adhesives", Dent Mater J, 32, pp.296~304 (2013)
  15. Wiegand A, "Review on fluoridereleasing restorative materials--Fluoride release and uptake characteristics, antibacterial activity and influence on caries formation", Dent Mater, 23, pp.343~362 (2007)
  16. Billington RW, "Glass ionomer cement: evidence pointing to fluorine release in the form of monofluorophosphate in addition to fluoride ion", Biomaterials, 25, pp.3399~3402 (2004)
  17. Can-Karabulut DC, "Linear regression modeling to compare fluoride release profiles of various restorative materials", Dent Mater, 23, pp.1057~1065 (2007)
  18. Bahadure RN, "An estimation of fluoride release from various dental restorative materials at different pH: in vitro study", J Indian Soc Pedod Prev Dent, 30, pp.122~126 (2012)
  19. Moreau JL, "Fluoride releasing restorative materials: effects of pH on mechanical properties and ion release", Dent Mater, 26, pp.e227~e235 (2010)
  20. 정유나, "Physical and chemical properties of experimental mixture of mineral trioxide aggregate and glass ionomer cement", Restorative Dentistry and Endodontics, 35(5), pp.344~352 (2010), 대한치과보존학회
  21. Seppä L, "The effect of fluoride application on fluoride release and the antibacterial action of glass ionomers", J Dent Res, 72, pp.1310~1314 (1993)
  22. Grobler SR, "A comparison of fluoride release from various dental materials", J Dent, 26, pp.259~265 (1998)
  23. Carvalho AS, "Fluoride release from some dental materials in different solutions", Oper Dent, 24, pp.14~19 (1999)
  24. Williams JA, "The influence of sample dimensions on fluoride ion release from a glass ionomer restorative cement", Biomaterials, 20, pp.1327~1337 (1999)
  25. Dionysopoulos P, "Fluoride release and uptake by four new fluoride releasing materials", J Oral Rehabil, 30, pp.866~872 (2003)
  26. Xu X, "Compressive strength, fluoride release and recharge of fluoride-releasing materials", Biomaterials, 24, pp.2451~2461 (2003)
  27. Hayacibara MF, "Simultaneous release of fluoride and aluminum from dental materials in various immersion media", Oper Dent, 29, pp.16~22 (2004)
  28. Hsu HM, "A continuous flow system for assessing fluoride release", uptake of fluoride-containing restorative materials, 2004, pp.20, 740~749
  29. Chan WD, "Fluoride release from dental cements and composites: a mechanistic study", Dent Mater, 22, pp.366~373 (2006)
  30. Gandolfi MG, "Fluoride release and absorption at different pH from glass-ionomer cements", Dent Mater, 22, pp.441~449 (2006)
  31. Selimović-Dragaš M, "In vitro fluoride release from a different kind of conventional and resin modified glass-ionomer cements", Bosn J Basic Med Sci, 13, pp.197~202 (2013)
  32. Mousavinasab SM, "Fluoride release by glass ionomer cements, compomer and giomer", Dent Res J (Isfahan), 6, pp.75~81 (2009)
  33. McKenzie MA, "The physical properties of conventional and resin-modified glassionomer dental cements stored in saliva, proprietary acidic beverages, saline and water", Biomaterials, 24, pp.4063~4069 (2003)
  34. Rothwell M, "The uptake and release of fluoride by ion-leaching cements after exposure to toothpaste", J Dent, 26, pp.591~597 (1998)
  35. Gao W, "Fluoride release", uptake of conventional and resin-modified glass ionomers, and compomers, 2001, pp.29, 301~306
  36. Rodrigues JA, "Visual evaluation of in vitro cariostatic effect of restorative materials associated with dentifrices", Braz Dent J, 16, pp.112~118 (2005)
  37. Dijkman GE, "Long-term fluoride release of visible light-activated composites in vitro: a correlation with in situ demineralization data", Caries Res, 27, pp.117~123 (1993)

관련 논문AI추천

Assessment of Fluoride Release through Dentin Adhesive in the Alkasite Restorative Material and Giomer김해니, 박호원, 서현우, 이주현대한소아치과학회 · 대한소아치과학회지2021 · 제48권 제4호Effect of casein phosphopeptideamorphous calcium phosphate on fluoride release and micro-shear bond strength of resin-modified glass ionomer cement in caries-affected dentinEssam El Saeid Al-Wakeel, Jamila Nuwayji Agob, Neven Saad Aref대한치과보존학회 · Restorative Dentistry and Endodontics2018 · 제43권 제4호Comparative Evaluation of the Fluoride Releasing Ability and Microbial Attachment of Glass-Hybrid Restorative Material김해니, 박호원, 이시영, 이주현, 최민기대한소아치과학회 · 대한소아치과학회지2024 · 제51권 제2호Porosity and pore size distribution in high-viscosity and conventional glass ionomer cements: a micro-computed tomography studyBergstrom Tamiris Gomes, Lopes Laísa Inara Gracindo, Lopes Ricardo Tadeu, Neves Aline Borburema, Neves Aline de Almeida, Silva Aline Saddock Sá da대한치과보존학회 · Restorative Dentistry and Endodontics2021 · 제46권 제4호표면 코팅제의 레진 강화형 글라스아이오노머 불소 유리량 및 용해도에 대한 효과유승훈, 윤태완대한턱관절교합학회 · 구강회복응용과학지2019 · 제35권 제2호Current aspects and prospects of glass ionomer cements for clinical dentistry박은영, Sohee Kang영남대학교 의과대학 · Journal of Yeungnam Medical Science2020 · 제37권 제3호

이 간행물의 다른 논문 (11건)