The effects of nano-sized hydroxyapatite on demineralization resistance and bonding strength in light-cured glass ionomer dental cement
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
The aim of this study was to evaluate the effect of incorporated nano HA on the demineralization resistance and bonding strength of LC GIC in comparison with micro HA. Fuji II LC GIC was used as the control group and a base material for experimental groups. Two experimental groups were prepared. One was prepared by adding 15% micro HA to LC GIC by weight ratio (Exp. 1), and the other was prepared by adding 15% nano HA instead (Exp. 2). According to the results, the following conclusions could be obtained. 1. Observing under the CLSM, the control group showed thicker enamel demineralization layer than in the experimental groups, and the Exp. 2 group showed the thinnest demineralization layer. 2. In SEM analysis, there was greater enamel demineralization in the control group. The Exp. 2 group was more resistant to demineralization compared to the Exp. 1 group. 3. The bonding strength was found to be in the increasing order of control, Exp. 1, and Exp. 2 group (p <0.05). 4. Observing the fractured surfaces under SEM after the bonding strength test was performed, there were bone-like apatite particles formed in HA-added experimental groups, and a greater number of bone-like apatite particles were formed in the Exp. 2 group compared to the Exp. 1 group.
Abstract
The aim of this study was to evaluate the effect of incorporated nano HA on the demineralization resistance and bonding strength of LC GIC in comparison with micro HA. Fuji II LC GIC was used as the control group and a base material for experimental groups. Two experimental groups were prepared. One was prepared by adding 15% micro HA to LC GIC by weight ratio (Exp. 1), and the other was prepared by adding 15% nano HA instead (Exp. 2). According to the results, the following conclusions could be obtained. 1. Observing under the CLSM, the control group showed thicker enamel demineralization layer than in the experimental groups, and the Exp. 2 group showed the thinnest demineralization layer. 2. In SEM analysis, there was greater enamel demineralization in the control group. The Exp. 2 group was more resistant to demineralization compared to the Exp. 1 group. 3. The bonding strength was found to be in the increasing order of control, Exp. 1, and Exp. 2 group (p <0.05). 4. Observing the fractured surfaces under SEM after the bonding strength test was performed, there were bone-like apatite particles formed in HA-added experimental groups, and a greater number of bone-like apatite particles were formed in the Exp. 2 group compared to the Exp. 1 group.
참고문헌 (28)
- Anderson P, "Demineralization in enamel and hydroxyapatite aggregates at increasing ionic strength", Arch Oral Biol, 49, pp.199~207 (2004)
- Santos C, "Hydroxyapatite as a filler for dental composite materials:mechanical properties and in vitro bioactivity of composites", J Mater Scien, 12, pp.565~573 (2001)
- Yoon SI, "The effects of hydroxyapatite on bonding strength between dental luting cement and human teeth", Key Eng Mater, 284, pp.953~956 (2005)
- Itthagarun A, "The effect of chewing gums containing calcium phosphates on the remineralization of artificial caries-like lesions in situ", Caries Res, 39, pp.251~254 (2005)
- Jeong SH, "Reminera-lization potential of new toothpaste containing nanohydroxyapatite", Key Eng Mater, 309, pp.537~540 (2006)
- Kuilong LV, "Remineralization effect of the nano-HA toothpaste on artificial caries", Key Eng Mater, 330, pp.267~270 (2007)
- Kim BI, "Tooth whitening effect of toothpastes containing nano-hydroxyapatite", Key Eng Mater, 309, pp.541~544 (2006)
- Kloke A, "An optimized synthetic substrate for orthodontic bond strength testing", Dent Mater, 13, pp.773~778 (2003)
- Lowenstam HA, "On biomineralization" (1989), Oxford University Press
- Arcis RW, "Mechanical properties of visible light-cured resins reinforced with hydroxyapatite for dental restoration", Dent Mater, 18, pp.49~57 (2002)
- Domingo C, "Dental composite reinforced with hydroxyapatite:Mechanical behavior and absorption", elution characteristics, 2001, pp.56, 297~305
- Huang M, "Synthesis and characterization of nano-HA", PA66 composites, 2003, pp.14, 655~660
- JH Kim, "The effects of hydroxyapatite on demineralization resistance and bonding strength in light-curing glass ionomer dental cement", Key Eng Mater, 396, pp.485~488 (2009)
- Gladys S, "Comparative physico-mechanical characterization of new hybrid restorative materials with conventional glass-ionomer and resin composite restorative materials", J Dent Res, 76, pp.883~894 (1997)
- Lucas ME, "Toughness, bonding and fluoride-release properties of hydroxyapatiteadded glass ionomer cement", Biomaterials, 24, pp.3787~3794 (2003)
- Arita K, "The effect of adding hydroxyapatite on the flexural strength of glass ionomer cement", Den Mater J, 22, pp.126~136 (2003)
- Gu YW, "Effect of incorporation of HA", ZrO2 into glass ionomer cement (GIC), 2005, pp.26, 713~720
- Glasspoole EA, "Effect of surface treatments on the bond strength of glass ionomers to enamel", Dent Mater, 18, pp.454~462 (2002)
- 배익현, "글라스 아이오노머 수복재의 불소 유리 및 재흡수양상", 대한소아치과학회지, 32(1), pp.136~143 (2005), 대한소아치과학회
- 박영수, "Glass Ionomer 수복재의 초기 법랑질 우식증에 대한 효과", 대한소아치과학회지, 29(4), pp.7~ (2002), 대한소아치과학회
- Mazzaoui SA, "Incorporation of Casein phosphopeptide-amorphous calcium phosphate into a glass-ionomer cement", J Dent Res, 82, pp.914~918 (2003)
- Geiger SB, "Fluoride carbonatoapatite in the intermediate layer between glass ionomer and dentin", Dent Mater, 9, pp.33~36 (1993)
- Akinmade AO, "Glass-ionomer cements as adhesive. Part I: Fundamental aspects and their clinical relevance", J Mater Sci Mater Med, 4, pp.93~101 (1993)
- Alkinmade AO, "Influence of cement layer thickness on the adhesive bond strength of polyalkenoate cements", Biomaterials, 13, pp.931~936 (1992)
- Sennou HE, "X-ray photoelectron spectroscopy study of the dentin-glass ionomer cement interface", Dent Mater, 15, pp.229~237 (1999)
- Ngo H, "A study of glass-ionomer cements and its interface with enamel and dentin using a low temperature, high resolution scanning electron microscope technique", Quintessence Int, 28, pp.63~69 (1997)
- Griffith AA, "The phenomena of rupture and flow in solids", Philos Trans R Soc London A, 221, pp.163~198 (1920)
- Tanumiharja M, "Microtensile bond strengths of glass ionomer (polyalkenoate) cements to dentine using four conditioners", J Dent, 28, pp.361~366 (2000)