Evaluation of two interforaminal implants and implant-assisted removable dentures on stress distribution: an in vitro study
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Objectives: In mandibular edentulism, the treatment option with a two-interforaminal implant-retained bridge and a removable partial denture is rarely evaluated in literature. The aim of this in vitro study was to evaluate the stress distribution of this treatment option by comparing it with traditional treatment options with interforaminal implants in the edentulous mandible. Materials and Methods: Two interforaminal implants were placed in a formalin-fixed cadaver mandible, and overdentures with three different types of attachments were fabricated: (1) two ball attachments and an overdenture, (2) a Dolder bar and an overdenture, and (3) screw-retained two-implant inter-canine porcelain fused to a metal bridge and an implant-assisted removable denture (IARD) with precision attachments. Three biting conditions were generated for each denture type, and the strains were documented under vertical loading of 100 N. Results: The calculated strain values from measured strains in all measurement sites and loading conditions for the screw-retained two-implant inter-canine porcelain fused to a metal bridge and a cast framework partial denture with precision attachments situation were lower than in the other scenarios (P<0.05). Conclusion: Within the limitations of the present study, it can be concluded that an IARD may be a reasonable and valuable alternative to ball attachments or a bar in two interforaminal implants, especially when the patients prefer to be able to show their teeth even when they take out their removable dentures.
Abstract
Objectives: In mandibular edentulism, the treatment option with a two-interforaminal implant-retained bridge and a removable partial denture is rarely evaluated in literature. The aim of this in vitro study was to evaluate the stress distribution of this treatment option by comparing it with traditional treatment options with interforaminal implants in the edentulous mandible. Materials and Methods: Two interforaminal implants were placed in a formalin-fixed cadaver mandible, and overdentures with three different types of attachments were fabricated: (1) two ball attachments and an overdenture, (2) a Dolder bar and an overdenture, and (3) screw-retained two-implant inter-canine porcelain fused to a metal bridge and an implant-assisted removable denture (IARD) with precision attachments. Three biting conditions were generated for each denture type, and the strains were documented under vertical loading of 100 N. Results: The calculated strain values from measured strains in all measurement sites and loading conditions for the screw-retained two-implant inter-canine porcelain fused to a metal bridge and a cast framework partial denture with precision attachments situation were lower than in the other scenarios (P<0.05). Conclusion: Within the limitations of the present study, it can be concluded that an IARD may be a reasonable and valuable alternative to ball attachments or a bar in two interforaminal implants, especially when the patients prefer to be able to show their teeth even when they take out their removable dentures.
참고문헌 (45)
- Zarb GA, "The longitudinal clinical effectiveness of osseointegrated dental implants: the Toronto Study. Part II: the prosthetic results", J Prosthet Dent, 64, pp.53~61 (1990)
- Burns DR, "Prospective clinical evaluation of mandibular implant overdentures : part I--retention, stability, and tissue response", J Prosthet Dent, 73, pp.354~363 (1995)
- Burns DR, "Randomized, prospective, clinical evaluation of prosthodontic modalities for mandibular implant overdenture treatment", J Prosthet Dent, 106, pp.12~22 (2011)
- Ortegón SM, "Retention forces of spherical attachments as a function of implant and matrix angulation in mandibular overdentures : an in vitro study", J Prosthet Dent, 101, pp.231~238 (2009)
- Geckili O, "Comparison of patient satisfaction, quality of life, and bite force between elderly edentulous patients wearing mandibular two implant-supported overdentures and conventional complete dentures after 4 years", Spec Care Dentist, 32, pp.136~141 (2012)
- Geckili O, "Impact of mandibular two-implant retained overdentures on life quality in a group of elderly Turkish edentulous patients", Arch Gerontol Geriatr, 53, pp.233~236 (2011)
- Naert I, "Prosthetic aspects and patient satisfaction with two-implant-retained mandibular overdentures : a 10-year randomized clinical study", Int J Prosthodont, 17, pp.401~410 (2004)
- Walton JN, "Implant angulation : a measurement technique, implant overdenture maintenance, and the influence of surgical experience", Int J Prosthodont, 14, pp.523~530 (2001)
- Geckili O, "Locator attachments as an alternative to ball attachments in 2-implant retained mandibular overdentures", J Can Dent Assoc, 73, pp.691~694 (2007)
- Trakas T, "Attachment systems for implant retained overdentures : a literature review", Implant Dent, 15, pp.24~34 (2006)
- Heckmann SM, "Overdenture attachment selection and the loading of implant and denture-bearing area. Part 2: a methodical study using five types of attachment", Clin Oral Implants Res, 12, pp.640~647 (2001)
- Osman RB, "Prosthodontic maintenance of maxillary implant overdentures : a systematic literature review", Int J Prosthodont, 25, pp.381~391 (2012)
- Bakke M, "Masticatory function and patient satisfaction with implant-supported mandibular overdentures : a prospective 5-year study", Int J Prosthodont, 15, pp.575~581 (2002)
- Bergendal T, "Implant-supported overdentures : a longitudinal prospective study", Int J Oral Maxillofac Implants, 13, pp.253~262 (1998)
- Karabuda C, "Comparison of 2 retentive systems for implant-supported overdentures : soft tissue management and evaluation of patient satisfaction", J Periodontol, 73, pp.1067~1070 (2002)
- MacEntee MI, "A clinical trial of patient satisfaction and prosthodontic needs with ball and bar attachments for implant-retained complete overdentures : three-year results", J Prosthet Dent, 93, pp.28~37 (2005)
- Mumcu E, "The effect of attachment type and implant number on satisfaction and quality of life of mandibular implant-retained overdenture wearers", Gerodontology, 29, pp.e618~e623 (2012)
- Kleis WK, "A comparison of three different attachment systems for mandibular two-implant overdentures : one-year report", Clin Implant Dent Relat Res, 12, pp.209~218 (2010)
- Cune M, "Patient satisfaction and preference with magnet, bar-clip, and ball-socket retained mandibular implant overdentures : a cross-over clinical trial", Int J Prosthodont, 18, pp.99~105 (2005)
- Davis DM, "Mandibular overdentures stabilized by Astra Tech implants with either ball attachments or magnets : 5-year results", Int J Prosthodont, 12, pp.222~229 (1999)
- Chaytor DV, "The longitudinal effectiveness of osseointegrated dental implants. The Toronto Study: bone level changes", Int J Periodontics Restorative Dent, 11, pp.112~125 (1991)
- Donatsky O, "Osseointegrated dental implants with ball attachments supporting overdentures in patients with mandibular alveolar ridge atrophy", Int J Oral Maxillofac Implants, 8, pp.162~166 (1993)
- Boerrigter EM, "A controlled clinical trial of implant-retained mandibular overdentures : clinical aspects", J Oral Rehabil, 24, pp.182~190 (1997)
- Burns DR, "Mandibular implant overdenture treatment : consensus and controversy", J Prosthodont, 9, pp.37~46 (2000)
- Naert I, "A 10-year randomized clinical trial on the influence of splinted and unsplinted oral implants retaining mandibular overdentures : peri-implant outcome", Int J Oral Maxillofac Implants, 19, pp.695~702 (2004)
- Cehreli MC, "A systematic review of marginal bone loss around implants retaining or supporting overdentures", Int J Oral Maxillofac Implants, 25, pp.266~277 (2010)
- Roos-Jansåker AM, "Dog model for study of supracrestal bone apposition around partially inserted implants", Clin Oral Implants Res, 13, pp.455~459 (2002)
- Brunski J, "Implants in dentistry: essentials of endosseous implants for maxillofacial reconstruction", pp.63~71 (1997), W.B. Saunders
- Bilhan H, "The comparison of marginal bone loss around mandibular overdenture-supporting implants with two different attachment types in a loading period of 36 months", Gerodontology, 28, pp.49~57 (2011)
- Bergkvist G, "A finite element analysis of stress distribution in bone tissue surrounding uncoupled or splinted dental implants", Clin Implant Dent Relat Res, 10, pp.40~46 (2008)
- Bassetti RG, "Implant-assisted removable partial denture prostheses : a critical review of selected literature", Int J Prosthodont, 31, pp.287~302 (2018)
- Wismeijer D, "Multicentre prospective evaluation of implant-assisted mandibular bilateral distal extension removable partial dentures : patient satisfaction", Clin Oral Implants Res, 24, pp.20~27 (2013)
- Payne AG, "Multicentre prospective evaluation of implant-assisted mandibular removable partial dentures : surgical and prosthodontic outcomes", Clin Oral Implants Res, 28, pp.116~125 (2017)
- Starr NL, "The distal extension case : an alternative restorative design for implant prosthetics", Int J Periodontics Restorative Dent, 21, pp.61~67 (2001)
- Feinberg E, "Precision attachment case restoration with implant abutments : a review with case reports", J Oral Implantol, 37, pp.489~498 (2011)
- Pellecchia M, "Distal extension mandibular removable partial denture connected to an anterior fixed implant-supported prosthesis : a clinical report", J Prosthet Dent, 83, pp.607~612 (2000)
- Chronopoulos V, "The use of dental implants in combination with removable partial dentures : a case report", J Esthet Restor Dent, 20, pp.355~364 (2008)
- Bilhan H., "Removable partial dentures: a practitioners' manual", pp.195~208 (2016), Springer International Publishing
- English CE, "Bar patterns in implant prosthodontics", Implant Dent, 3, pp.217~229 (1994)
- Machado AC, "Photoelastic analysis of the distribution of stress in different systems of overdentures on osseous-integrated implants", J Craniofac Surg, 22, pp.2332~2336 (2011)
- Nishioka RS, "External hexagon and internal hexagon in straight and offset implant placement : strain gauge analysis", Implant Dent, 18, pp.512~520 (2009)
- Rangert B, "Vertical load distribution on a three-unit prosthesis supported by a natural tooth and a single Brånemark implant. An in vivo study", Clin Oral Implants Res, 6, pp.40~46 (1995)
- Haruta A, "Effects of mucosal thickness on the stress distribution and denture stability of mandibular implant-supported overdentures with unsplinted attachments in vitro", J Dent Biomech, 2011, pp.894395~ (2011)
- Menicucci G, "Mandibular implant-retained overdenture : finite element analysis of two anchorage systems", Int J Oral Maxillofac Implants, 13, pp.369~376 (1998)
- Thayer HH, "Photoelastic stess analysis of overdenture attachments", J Prosthet Dent, 43, pp.611~617 (1980)
