Push-out bond strength of fiber post after post space surface pretreatment
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Objectives: This study aims to compare the push-out bond strength of fiber posts luted with self-adhesive resin cement with various pretreatments. Materials and Methods: Twenty-one single-rooted human premolar teeth were treated endodontically using a Ni-Ti rotary file and obturated with gutta-percha points and a sealer. The post room was immediately prepared to a depth of 12 mm with a post drill, while the teeth were divided into three groups: 1) no pretreatment (control); 2) pretreatment with 17% ethyl - enediaminetetraacetic acid (PE), and 3) pretreatment with 32% phosphoric acid (PP). Self-adhesive resin cement (G-CEM LinkAce) was applied directly to the post room. After application, a fiber post (LuxaPost) was immediately seated and lightcured for 40 s. The specimens were transversally sectioned to measure the regional push-out bond strengths. Results: The push-out bond strength was highest for all groups in the coronal parts and lowest in the apical parts (p<0.05). No significant differences according to the pretreatment were observed in the coronal part and middle parts. However, in the apical part, a significant difference was observed between the control and PE groups and between the control and PP groups (p < 0.05). Conclusion: Considering the limitations of this study, pretreatment with EDTA or phosphoric acid did not improve the push-out bond strength of fiber posts cemented with self-adhesive resin cement.
Abstract
Objectives: This study aims to compare the push-out bond strength of fiber posts luted with self-adhesive resin cement with various pretreatments. Materials and Methods: Twenty-one single-rooted human premolar teeth were treated endodontically using a Ni-Ti rotary file and obturated with gutta-percha points and a sealer. The post room was immediately prepared to a depth of 12 mm with a post drill, while the teeth were divided into three groups: 1) no pretreatment (control); 2) pretreatment with 17% ethyl - enediaminetetraacetic acid (PE), and 3) pretreatment with 32% phosphoric acid (PP). Self-adhesive resin cement (G-CEM LinkAce) was applied directly to the post room. After application, a fiber post (LuxaPost) was immediately seated and lightcured for 40 s. The specimens were transversally sectioned to measure the regional push-out bond strengths. Results: The push-out bond strength was highest for all groups in the coronal parts and lowest in the apical parts (p<0.05). No significant differences according to the pretreatment were observed in the coronal part and middle parts. However, in the apical part, a significant difference was observed between the control and PE groups and between the control and PP groups (p < 0.05). Conclusion: Considering the limitations of this study, pretreatment with EDTA or phosphoric acid did not improve the push-out bond strength of fiber posts cemented with self-adhesive resin cement.
참고문헌 (25)
- Barjau-Escribano A, "Influence of prefabricated post material on restored teeth : fracture strength and stress distribution", Oper Dent, 31(1), pp.47~54 (2006)
- Yoldas O, "Microhardness of composites in simulated root canals cured with light transmitting posts and glass-fiber reinforced composite posts", J Endod, 31(2), pp.104~106 (2005)
- Burgess JO, "Self-Adhesive Resin Cements", J Esthet Restor Dent, 22(6), pp.412~419 (2010)
- Tay FR, "Monoblocks in root canals : a hypothetical or a tangible goal", J Endod, 33(4), pp.391~398 (2007)
- Mao H, "Effect of three radicular dentine treatments and two luting cements on the regional bond strength of quartz fibre posts", Clin Oral Investig, 15(6), pp.869~878 (2011)
- Ferracane JL, "Self-adhesive resin cements - chemistry, properties and clinical considerations", J Oral Rehabil, 38(4), pp.295~314 (2011)
- Goracci C, "Current perspectives on post systems: a literature review", Aust Dent J, 56(1), pp.77~83 (2011)
- Moodley D, "Dentine bonding agents--a review of adhesion to dentine", SADJ, 57(6), pp.234~238 (2002)
- Sadek FT, "Immediate and 24-hour evaluation of the interfacial strengths of fiber posts", J Endod, 32(12), pp.1174~1177 (2006)
- Broyles AC, "Effect of dentin surface modification on the microtensile bond strength of selfadhesive resin cements", J Prosthodont, 22(1), pp.59~62 (2013)
- Goracci C, "The adhesion between fiber posts and root canal walls : comparison between microtensile and push-out bond strength measurements", Eur J Oral Sci, 112(4), pp.353~361 (2004)
- Pavan S, "The effect of dentin pretreatment on the microtensile bond strength of self-adhesive resin cements", J Prosthet Dent, 104(4), pp.258~264 (2010)
- Aguiar TR, "Effect of curing mode on bond strength of self-adhesive resin luting cements to dentin", J Biomed Mater Res B Appl Biomater, 93(1), pp.122~127 (2010)
- Arrais CA, "Effect of curing mode on the polymerization characteristics of dual-cured resin cement systems", J Dent, 36(6), pp.418~426 (2008)
- 장훈상, "Push-out bond strengths of fiber-reinforced composite posts with various resin cements according to the root level", The Journal of Advanced of Prosthodontics, 5(3), pp.278~286 (2013), 대한치과보철학회[DOI]
- Durski MT, "Push-out bond strength evaluation of glass fiber posts with different resin cements and application techniques", Oper Dent, 41(1), pp.103~110 (2016)
- Mosharraf R, "Push-out bond strength of a fiber post system with two resin cements", Dent Res J (Isfahan), 8(1), pp.88~93 (2011)
- Oskoee SS, "Push-out bond strength of fiber posts to intraradicular dentin using multimode adhesive system", J Endod, 42(12), pp.1794~1798 (2016)
- Pereira JR, "Push-out bond strength of fiber posts to root dentin using glass ionomer and resin modified glass ionomer cements", J Appl Oral Sci, 22(5), pp.390~396 (2014)
- 김서령, "Comparison of push-out bond strength of post according to cement application methods", Restorative Dentistry and Endodontics, 35(6), pp.479~485 (2010), 대한치과보존학회
- Le Bell AM, "Depth of light-initiated polymerization of glass fiber-reinforced composite in a simulated root canal", Int J Prosthodont, 16(4), pp.403~408 (2003)
- Wu H, "Effects of light penetration and smear layer removal on adhesion of post-cores to root canal dentin by selfetching adhesives", Dent Mater, 25(12), pp.1484~1492 (2009)
- Hashimoto M, "Over-etching effects on micro-tensile bond strength and failure patterns for two dentin bonding systems", J Dent, 30(2-3), pp.99~105 (2002)
- Rasimick BJ, "Effect of EDTA conditioning upon the retention of fibre posts luted with resin cements", Int Endod J, 41(12), pp.1101~1106 (2008)
- 염승현, "Effect of dentin pretreatment and curing mode on the microtensile bond strength of self-adhesive resin cements", The Journal of Advanced of Prosthodontics, 7(4), pp.317~322 (2015), 대한치과보철학회[DOI]