Effect of polishing and glazing on the color and spectral distribution of monolithic zirconia
2
조회
0
다운로드
6
인용
0
참고문헌
키워드
초록
PURPOSE. The aim of this study was to evaluate the effect of polishing and glazing on the color and spectral distribution of monolithic zirconia. MATERIALS AND METHODS. Forty-five monolithic zirconia specimens (16.3 mm × 16.4 mm × 2.0 mm) were fabricated and divided into 5 groups according to the number of A2-coloring liquid applications (Group I to V). Each group was divided into 3 subgroups according to the method of surface treatments (n=3): N: no treatment; P: polishing; G: glazing. Color and spectral distribution of five different areas of each specimen were measured according to CIELAB color space in the reflectance mode relative to the standard illuminant D65 on a reflection spectrophotometer. Data were analyzed using one-way ANOVA followed by Tukey’ HSD test, Pearson correlation and regression analysis (α=.05). RESULTS. There was a significant difference in CIE L* between Subgroup N and P, and in CIE b* between Subgroup P and G in each group. Spectral reflectance generally decreased in Subgroup P and G in comparison with Subgroup N. Color differences between Subgroup P and G were within the perceptibility threshold (ΔE*ab< 3.7) in most groups. Highly significant correlation was found between CIE b*and each subgroups as the number of coloring liquid applications increased (R2>0.88, P<.001). CONCLUSION. A perceptible color difference can be detected after polishing of monolithic zirconia. Polishing decreases the lightness, and glazing also decreases the lightness, but increases the yellowness of monolithic zirconia.
Abstract
PURPOSE. The aim of this study was to evaluate the effect of polishing and glazing on the color and spectral distribution of monolithic zirconia. MATERIALS AND METHODS. Forty-five monolithic zirconia specimens (16.3 mm × 16.4 mm × 2.0 mm) were fabricated and divided into 5 groups according to the number of A2-coloring liquid applications (Group I to V). Each group was divided into 3 subgroups according to the method of surface treatments (n=3): N: no treatment; P: polishing; G: glazing. Color and spectral distribution of five different areas of each specimen were measured according to CIELAB color space in the reflectance mode relative to the standard illuminant D65 on a reflection spectrophotometer. Data were analyzed using one-way ANOVA followed by Tukey’ HSD test, Pearson correlation and regression analysis (α=.05). RESULTS. There was a significant difference in CIE L* between Subgroup N and P, and in CIE b* between Subgroup P and G in each group. Spectral reflectance generally decreased in Subgroup P and G in comparison with Subgroup N. Color differences between Subgroup P and G were within the perceptibility threshold (ΔE*ab< 3.7) in most groups. Highly significant correlation was found between CIE b*and each subgroups as the number of coloring liquid applications increased (R2>0.88, P<.001). CONCLUSION. A perceptible color difference can be detected after polishing of monolithic zirconia. Polishing decreases the lightness, and glazing also decreases the lightness, but increases the yellowness of monolithic zirconia.
참고문헌 (25)
- Weinstein M, "Fused porcelain-to-metal teeth", US patent No 3052, 982, ~ (1962)
- Pröbster L, "Slip-casting alumina ceramics for crown and bridge restorations", Quintessence Int, 23, pp.25~31 (1992)
- Vult von Steyern P, "All-ceramic fixed partial dentures designed according to the DC-Zirkon technique A 2-year clinical study", J Oral Rehabil, 32, pp.180~187 (2005)
- Tinschert J, "Fracture resistance of lithium disilicate-, alumina-, and zirconia-based three-unit fixed partial dentures: a laboratory study", Int J Prosthodont, 14, pp.231~238 (2001)
- Al-Amleh B, "Clinical trials in zirconia: a systematic review", J Oral Rehabil, 37, pp.641~652 (2010)
- 하승룡, "The influence of various core designs on stress distribution in the veneered zirconia crown: a finite element analysis study", The Journal of Advanced of Prosthodontics, 5(2), pp.187~197 (2013), 대한치과보철학회
- Beuer F, "High-strength CAD", CAM-fabricated veneering material sintered to zirconia copings-a new fabrication mode for all-ceramic restorations, 2009, pp.25, 121~128
- Aboushelib MN, "Microtensile bond strength of different components of core veneered all-ceramic restorations. Part II: Zirconia veneering ceramics", Dent Mater, 22, pp.857~863 (2006)
- Aboushelib MN, "Microtensile bond strength of different components of core veneered all-ceramic restorations. Part 3: double veneer technique", J Prosthodont, 17, pp.9~13 (2008)
- Wiskott HWA, "Fixed prosthodontics: principles and clinics", pp.670~671 (2011), Quintessence publishing Co
- Klausner LH, "Polished versus autoglazed porcelain surfaces", J Prosthet Dent, 47, pp.157~162 (1982)
- Brewer JD, "Clinical discrimination between autoglazed and polished porcelain surfaces", J Prosthet Dent, 64, pp.631~634 (1990)
- Scurria MS, "Surface roughness of two polished ceramic materials", J Prosthet Dent, 71, pp.174~177 (1994)
- Kim IJ, "Effect of surface topography on the color of dental porcelain", J Mater Sci Mater Med, 14, pp.405~409 (2003)
- Sarac D, "The effects of porcelain polishing systems on the color and surface texture of feldspathic porcelain", J Prosthet Dent, 96, pp.122~128 (2006)
- Yilmaz C, "Color stability of glazed and polished dental porcelains", J Prosthodont, 17, pp.20~24 (2008)
- Commission Internationale de l’'Eclairag, "Colorimetry, CIE 015" (2004), CIE Central Bureau
- Obregon A, "Effects of opaque and porcelain surface texture on the color of ceramometal restorations", J Prosthet Dent, 46, pp.330~340 (1981)
- Lee YK, "Effect of surface conditions on the color of dental resin composites", J Biomed Mater Res, 63, pp.657~663 (2002)
- Chung KH, "Effects of finishing and polishing procedures on the surface texture of resin composites", Dent Mater, 10, pp.325~330 (1994)
- Knispel G, "Factors affecting the process of color matching restorative materials to natural teeth", Quintessence Int, 22, pp.525~531 (1991)
- Heffernan MJ, "Relative translucency of six all-ceramic systems. Part I: core materials", J Prosthet Dent, 88, pp.4~9 (2002)
- Baldissara P, "Translucency of zirconia copings made with different CAD", CAM systems, 2010, pp.104, 6~12
- Rosenstiel SF, "Comparison of glazed and polished dental porcelain", Int J Prosthodont, 2, pp.524~529 (1989)
- Johnston WM, "Assessment of appearance match by visual observation and clinical colorimetry", J Dent Res, 68, pp.819~822 (1989)