Effect of surface finishing treatments on the color stability of CAD/CAM materials
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
PURPOSE. The aim of this study was to evaluate the effect of different surface finishing processes on the color stabilities of lithium disilicate glass-ceramics, zirconia-reinforced lithium silicate ceramics, and resin nanoceramics after artificial ageing. MATERIALS AND METHODS. 216 samples were prepared from 3 different CAD/CAM materials (LAVA Ultimate, IPS e.max CAD, VITA Suprinity) with A1 HT color at a size of 14 × 12 mm and a thickness of 0.5 ± 0.05 mm. Color measurements of the samples were performed with a spectrophotometer using color parameters and CIE Lab color system on a gray backing between baseline color and after 5000 cycles of artificial ageing in 4 stages (i.e. the first measurement before the treatment, the second measurement after polishing, the third measurement after cement application, and the fourth measurement after artificial ageing). The results were evaluated using the Variance analysis and Fisher’s LSD test. RESULTS. Resin nanoceramics (LU) exhibited higher color change values than zirconia-reinforced lithium silicate (VS) and lithium disilicate (EC) ceramics after artificial ageing. Manual polishing and glazing resulted in similar color change for LU and VS (P>.05). In the EC group, glazing provided statistically different results as compared to the manual polishing and control groups (P<.05). Among the ceramic groups, color change values of the subgroup, which was treated by glazing, of the zirconia-reinforced lithium silicate (VS) and lithium disilicate (EC) samples were below the clinically acceptable level (ΔE < 3.5). CONCLUSION. The lowest color change for all stages was observed in Vita Suprinity.
Abstract
PURPOSE. The aim of this study was to evaluate the effect of different surface finishing processes on the color stabilities of lithium disilicate glass-ceramics, zirconia-reinforced lithium silicate ceramics, and resin nanoceramics after artificial ageing. MATERIALS AND METHODS. 216 samples were prepared from 3 different CAD/CAM materials (LAVA Ultimate, IPS e.max CAD, VITA Suprinity) with A1 HT color at a size of 14 × 12 mm and a thickness of 0.5 ± 0.05 mm. Color measurements of the samples were performed with a spectrophotometer using color parameters and CIE Lab color system on a gray backing between baseline color and after 5000 cycles of artificial ageing in 4 stages (i.e. the first measurement before the treatment, the second measurement after polishing, the third measurement after cement application, and the fourth measurement after artificial ageing). The results were evaluated using the Variance analysis and Fisher’s LSD test. RESULTS. Resin nanoceramics (LU) exhibited higher color change values than zirconia-reinforced lithium silicate (VS) and lithium disilicate (EC) ceramics after artificial ageing. Manual polishing and glazing resulted in similar color change for LU and VS (P>.05). In the EC group, glazing provided statistically different results as compared to the manual polishing and control groups (P<.05). Among the ceramic groups, color change values of the subgroup, which was treated by glazing, of the zirconia-reinforced lithium silicate (VS) and lithium disilicate (EC) samples were below the clinically acceptable level (ΔE < 3.5). CONCLUSION. The lowest color change for all stages was observed in Vita Suprinity.
참고문헌 (30)
- Fasbinder DJ, "Surface evaluation of polishing techniques for new resilient CAD", CAM restorative materials, 2016, pp.28, 56~66
- Kanat-Ertürk B, "Color stability of CAD", CAM ceramics prepared with different surface finishing procedures, 2020, pp.29, 166~172
- Akar GC, "Effects of surface-finishing protocols on the roughness, color change, and translucency of different ceramic systems", J Prosthet Dent, 112, pp.314~321 (2014)
- Barizon KT, "Ceramic materials for porcelain veneers:part II. Effect of material, shade, and thickness on translucency", J Prosthet Dent, 112, pp.864~870 (2014)
- Kilinc H, "Optical behaviors of esthetic CAD-CAM restorations after different surface finishing and polishing procedures and UV aging : An in vitro study", J Prosthet Dent, 120, pp.107~113 (2018)
- Amaya-Pajares SP, "Effect of finishing and polishing on the surface roughness of four ceramic materials after occlusal adjustment", J Esthet Restor Dent, 28, pp.382~396 (2016)
- Anusavice KJ, "Which mechanical and physical testing methods are relevant for predicting the clinical performance of ceramic-based dental prostheses?", Clin Oral Implants Res, 18, pp.218~231 (2007)
- Motro PF, "Effects of different surface treatments on stainability of ceramics", J Prosthet Dent, 108, pp.231~237 (2012)
- Vichi A, "Effect of finishing and polishing on roughness and gloss of lithium disilicate and lithium silicate zirconia reinforced glass ceramic for CAD", CAM systems, 2018, pp.43, 90~100
- Dos Santos DM, "Effect of different acidic solutions on the optical behavior of lithium disilicate ceramics", J Prosthet Dent, 118, pp.430~436 (2017)
- Lawson NC, "Gloss and stain resistance of ceramic-polymer CAD", CAM restorative blocks, 2016, pp.28, S40~5
- Alp G, "Effect of surface treatments and coffee thermocycling on the color and translucency of CAD-CAM monolithic glass-ceramic", J Prosthet Dent, 120, pp.263~268 (2018)
- Palla ES, "Color stability of lithium disilicate ceramics after aging and immersion in common beverages", J Prosthet Dent, 119, pp.632~642 (2018)
- Karaokutan I, "Color stability of CAD", CAM fabricated inlays after accelerated artificial aging, 2016, pp.25, 472~477
- Turgut S, "Colour stability of laminate veneers : an in vitro study", J Dent, 39, pp.e57~e64 (2011)
- Mina NR, "The influence of simulated aging on the color stability of composite resin cements", J Prosthet Dent, 121, pp.306~310 (2019)
- Alghazali N, "Influence of the arabic-coffee on the overall color of glazed or polished porcelain veneers-In vitro study", Open Dent J, 13, pp.364~370 (2019)
- Ardu S, "A long-term laboratory test on staining susceptibility of esthetic composite resin materials", Quintessence Int, 41, pp.695~702 (2010)
- Kuehni RC, "An experiment in visual scaling of small color differences", Color Res App, 4, pp.83~91 (1979)
- Preis V, "Influence of cementation on in vitro performance, marginal adaptation and fracture resistance of CAD", CAM-fabricated ZLS molar crowns, 2015, pp.31, 1363~1369
- Belli R, "Chairside CAD", CAM materials. Part 1: Measurement of elastic constants and microstructural characterization, 2017, pp.33, 84~98
- Ramos Nde C, "Microstructure characterization and SCG of newly engineered dental ceramics", Dent Mater, 32, pp.870~878 (2016)
- Acar O, "Color stainability of CAD", CAM and nanocomposite resin materials, 2016, pp.115, 71~75
- Rocca GT, "A technique to improve the esthetic aspects of CAD", CAM composite resin restorations, 2010, pp.104, 273~275
- Ferracane JL, "Hygroscopic and hydrolytic effects in dental polymer networks", Dent Mater, 22, pp.211~222 (2006)
- Gawriołek M, "Color and luminescence stability of selected dental materials in vitro", J Prosthodont, 21, pp.112~122 (2012)
- Hamza TA, "Effect of artificial accelerated aging on surface roughness and color stability of different ceramic restorations", Stomatol Dis Sci, 1, pp.8~13 (2017)
- Dos Santos PH, "Effect of thermocycling on roughness of nanofill, microfill and microhybrid composites", Acta Odontol Scand, 73, pp.176~181 (2015)
- Subaşı MG, "Effects of fabrication and shading technique on the color and translucency of new-generation translucent zirconia after coffee thermocycling", J Prosthet Dent, 120, pp.603~608 (2018)
- Yuan JC, "Effect of brushing and thermocycling on the shade and surface roughness of CAD-CAM ceramic restorations", J Prosthet Dent, 119, pp.1000~1006 (2018)