Adhesion of 10-MDP containing resin cements to dentin with and without the etch-and-rinse technique
2
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
PURPOSE. This study evaluated the adhesion of 10-MDP containing self-etch and self-adhesive resin cements to dentin with and without the use of etch-and-rinse technique. MATERIALS AND METHODS. Human third molars (N=180) were randomly divided into 6 groups (n=30 per group). Conventional (Panavia F2.0, Kuraray-PAN) and self-adhesive resin cements (Clearfil SA, Kuraray-CSA) were bonded to dentin surfaces either after application of 3-step etch-and-rinse (35% H3PO4 + ED Primer) or two-step self-etch adhesive resin (Clearfil SE Bond). Specimens were subjected to shear bond strength test using the universal testing machine (0.5 mm/min). The failure types were analyzed using a stereomicroscope and quality of hybrid layer was observed under a scanning electron microscope. The data (MPa) were analyzed using two-way ANOVA and Tukey’ tests (α=.05). RESULTS. Overall, PAN adhesive cement showed significantly higher mean bond strength (12.5 ± 2.3 - 14.1 ± 2.4 MPa) than CSA cement (9.3 ± 1.4 - 13.9 ± 1.9 MPa) (P<.001). Adhesive failures were more frequent in CSA cement groups when used in conjunction with two-step self-adhesive (68%) or no adhesive at all (66%). Hybrid layer quality was inferior in CSA compared to PAN cement in all conditions. CONCLUSION. In clinical situations where bonding to dentin substrate is crucial, both conventional and self-adhesive resin cements based on 10-MDP can benefit from etch-and-rinse technique to achieve better quality of adhesion in the early clinical period.
Abstract
PURPOSE. This study evaluated the adhesion of 10-MDP containing self-etch and self-adhesive resin cements to dentin with and without the use of etch-and-rinse technique. MATERIALS AND METHODS. Human third molars (N=180) were randomly divided into 6 groups (n=30 per group). Conventional (Panavia F2.0, Kuraray-PAN) and self-adhesive resin cements (Clearfil SA, Kuraray-CSA) were bonded to dentin surfaces either after application of 3-step etch-and-rinse (35% H3PO4 + ED Primer) or two-step self-etch adhesive resin (Clearfil SE Bond). Specimens were subjected to shear bond strength test using the universal testing machine (0.5 mm/min). The failure types were analyzed using a stereomicroscope and quality of hybrid layer was observed under a scanning electron microscope. The data (MPa) were analyzed using two-way ANOVA and Tukey’ tests (α=.05). RESULTS. Overall, PAN adhesive cement showed significantly higher mean bond strength (12.5 ± 2.3 - 14.1 ± 2.4 MPa) than CSA cement (9.3 ± 1.4 - 13.9 ± 1.9 MPa) (P<.001). Adhesive failures were more frequent in CSA cement groups when used in conjunction with two-step self-adhesive (68%) or no adhesive at all (66%). Hybrid layer quality was inferior in CSA compared to PAN cement in all conditions. CONCLUSION. In clinical situations where bonding to dentin substrate is crucial, both conventional and self-adhesive resin cements based on 10-MDP can benefit from etch-and-rinse technique to achieve better quality of adhesion in the early clinical period.
참고문헌 (25)
- Nakabayashi N, "The promotion of adhesion by the infiltration of monomers into tooth substrates", J Biomed Mater Res, 16, pp.265~273 (1982)
- Tay FR, "Variability in microleakage observed in a total-etch wet-bonding technique under different handling conditions", J Dent Res, 74, pp.1168~1178 (1995)
- van Meerbeek B, "Adhesives and cements to promote preservation dentistry", Oper Dent, 6, pp.119~144 (2001)
- van Meerbeek B, "Buonocore memorial lecture. Adhesion to enamel and dentin: current status and future challenges", Oper Dent, 28, pp.215~235 (2003)
- Peumans M, "Clinical effectiveness of contemporary adhesives: a systematic review of current clinical trials", Dent Mater, 21, pp.864~881 (2005)
- Yoshida Y, "Comparative study on adhesive performance of functional monomers", J Dent Res, 83, pp.454~458 (2004)
- van Landuyt KL, "Systematic review of the chemical composition of contemporary dental adhesives", Biomaterials, 28, pp.3757~3785 (2007)
- van Landuyt KL, "van Meerbeek B. Influence of the chemical structure of functional monomers on their adhesive performance", J Dent Res, 87, pp.757~761 (2008)
- Wang T, "Photocure bonding agent containing phosphoric methacrylate", Dent Mater, 7, pp.59~62 (1991)
- Chigira H, "Selfetching dentin primers containing phenyl-P", J Dent Res, 73, pp.1088~1095 (1994)
- Watanabe I, "Bonding to ground dentin by a phenyl-P self-etching primer", J Dent Res, 73, pp.1212~1220 (1994)
- Carvalho RM, "Adhesive permeability affects coupling of resin cements that utilise self-etching primers to dentine", J Dent, 32, pp.55~65 (2004)
- Monticelli F, "Limited decalcification", diffusion of self-adhesive cements into dentin, 2008, pp.87, 974~979
- Madina MM, "Effect of surface conditioning and taper angle on the retention of IPS e.max Press crowns", J Prosthodont, 19, pp.200~204 (2010)
- Melo RM, "Bond strength of two resin cements on dentin using different cementation strategies", J Esthet Restor Dent, 22, pp.262~268 (2010)
- Fujita K, "Effect of reacted acidic monomer with calcium on bonding performance", J Dent Res, 90, pp.607~612 (2011)
- Özcan M, "Adhesion of conventional and simplified resin-based luting cements to superficial and deep dentin", Clin Oral Investig, 16, pp.1081~1088 (2012), Clin Oral Investig
- van Meerbeek B, "The clinical performance of adhesives", J Dent, 26, pp.1~20 (1998)
- Toledano M, "Effect of acid etching and collagen removal on dentin wettability and roughness", J Biomed Mater Res, 47, pp.198~203 (1999)
- Erhardt MC, "Influence of phosphoric acid pretreatment on self-etching bond strengths", J Esthet Restor Dent, 16, pp.33~40 (2004)
- Moszner N, "Chemical aspects of selfetching enamel-dentin adhesives: a systematic review", Dent Mater, 21, pp.895~910 (2005)
- Mazzitelli C, "Effect of simulated pulpal pressure on self-adhesive cements bonding to dentin", Dent Mater, 24, pp.1156~1163 (2008)
- de Munck J, "Bonding of an auto-adhesive luting material to enamel and dentin", Dent Mater, 20, pp.963~971 (2004)
- Goracci C, "Microtensile bond strength and interfacial properties of self-etching and self-adhesive resin cements used to lute composite onlays under different seating forces", J Adhes Dent, 8, pp.327~335 (2006)
- Pisani-Proença J, "Influence of different surface conditioning protocols on microtensile bond strength of self-adhesive resin cements to dentin", J Prosthet Dent, 105, pp.227~235 (2011)