Impact of surface roughness of gypsum materials on adaptation of zirconia cores
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
PURPOSE. The present study investigated the influences of various gypsum materials on the precision of fit of CAD/CAM-fabricated prostheses and analyzed their correlation with surface roughness. MATERIALS AND METHODS. The master model of the mandibular right first molar was replicated, and four experimental groups based on two types of Type IV stone (GC Fujirock EP, Die keen) and two types of scannable stone (Aesthetic-Basegold, Everest Rock) were created to include a total of 40 specimens, 10 in each group. The surface roughness of the working models for the respective experimental groups was measured. Once the zirconia cores had been fabricated, the marginal and internal fits were measured with a digital microscope using the silicone replica technique. The mean and standard deviation of the respective points of measurement were computed and analyzed through the one-way ANOVA and Tukey’s HSD test. The correlation between surface roughness and the precision of fit of the zirconia core was analyzed using the Pearson correlation analysis (α=.05). RESULTS. The zirconia cores fabricated from the scannable stone working models exhibited a superior precision of fit as compared to those fabricated from the Type IV stone working models. The correlation analysis results showed a clear positive correlation between surface roughness and the precision of fit of zirconia cores in all of the experimental groups (P<.05). CONCLUSION. The results confirmed that the surface roughness of dental working models has a decisive influence on the precision of fit of zirconia cores.
Abstract
PURPOSE. The present study investigated the influences of various gypsum materials on the precision of fit of CAD/CAM-fabricated prostheses and analyzed their correlation with surface roughness. MATERIALS AND METHODS. The master model of the mandibular right first molar was replicated, and four experimental groups based on two types of Type IV stone (GC Fujirock EP, Die keen) and two types of scannable stone (Aesthetic-Basegold, Everest Rock) were created to include a total of 40 specimens, 10 in each group. The surface roughness of the working models for the respective experimental groups was measured. Once the zirconia cores had been fabricated, the marginal and internal fits were measured with a digital microscope using the silicone replica technique. The mean and standard deviation of the respective points of measurement were computed and analyzed through the one-way ANOVA and Tukey’s HSD test. The correlation between surface roughness and the precision of fit of the zirconia core was analyzed using the Pearson correlation analysis (α=.05). RESULTS. The zirconia cores fabricated from the scannable stone working models exhibited a superior precision of fit as compared to those fabricated from the Type IV stone working models. The correlation analysis results showed a clear positive correlation between surface roughness and the precision of fit of zirconia cores in all of the experimental groups (P<.05). CONCLUSION. The results confirmed that the surface roughness of dental working models has a decisive influence on the precision of fit of zirconia cores.
참고문헌 (26)
- Al-Abidi K, "The effect of adding a stone base on the accuracy of working casts using different types of dental stone", J Contemp Dent Pract, 7, pp.17~28 (2006)
- Anusavice KJ, "Phillip’s science of dental material", pp.621~654 (2003), WB Saunders
- "ISO 6873. Dental gypsum products. International Organization for Standardization", Geneva, ~ (2013)
- 김기백, "Evaluation of the marginal and internal gap of metal-ceramic crown fabricated with a selective laser sintering technology: two- and threedimensional replica techniques", The Journal of Advanced of Prosthodontics, 5(2), pp.179~186 (2013), 대한치과보철학회[DOI]
- American Dental Association, "Specification No. 25 for dental gypsum products. In: Certification program for dental materials", American Dental Association, 1~14 (1990)
- Millstein PL, "Determining the accuracy of gypsum casts made from type IV dental stone", J Oral Rehabil, 19, pp.239~243 (1992)
- Duke P, "Study of the physical properties of type IV gypsum, resin-containing, and epoxy die materials", J Prosthet Dent, 83, pp.466~473 (2000)
- 김재홍, "Accuracy and precision of polyurethane dental arch models fabricated using a three-dimensional subtractive rapid prototyping method with an intraoral scanning technique", 대한치과교정학회지, 44(2), pp.69~76 (2014), 대한치과교정학회
- Linke BA, "Distortion analysis of stone casts made from impression materials", J Prosthet Dent, 54, pp.794~802 (1985)
- DeLong R, "Factors influencing optical 3D scanning of vinyl polysiloxane impression materials", J Prosthodont, 10, pp.78~85 (2001)
- Rodriguez JM, "Surface roughness of impression materials and dental stones scanned by non-contacting laser profilometry", Dent Mater, 25, pp.500~505 (2009)
- Beuer F, "Marginal and internal fits of fixed dental prostheses zirconia retainers", Dent Mater, 25, pp.94~102 (2009)
- Kokubo Y, "Clinical marginal and internal gaps of In-Ceram crowns fabricated using the GN-I system", J Oral Rehabil, 32, pp.753~758 (2005)
- Williams GJ, "A study of some factors affecting the surface properties of dental stone", Br Dent J, 156, pp.46~53 (1984)
- Keuter FM, "Surface roughness of dental stone casts from alginate impressions", J Dent, 14, pp.23~28 (1986)
- Nanami T, "Surface texture of stone model setting against elastomer impression materials", Swed Dent J, 8, pp.251~255 (1984)
- Ender A, "Influence of scanning strategies on the accuracy of digital intraoral scanning systems", Int J Comput Dent, 16, pp.11~21 (2013)
- Karl M, "Effect of intraoral scanning on the passivity of fit of implant-supported fixed dental prostheses", Quintessence Int, 43, pp.555~562 (2012)
- Luthardt RG, "Accuracy of mechanical digitizing with a CAD", CAM system for fixed restorations, 2001, pp.14, 146~151
- "Reports of councils and bureaus: Revised American National Standards Institute", American Dental Association Specification No. 8 for zinc phosphate cement, 1978, pp.96, 121~123
- Sorensen SE, "Gingival and alveolar bone reaction to marginal fit of subgingival crown margins", Scand J Dent Res, 94, pp.109~114 (1986)
- McLean JW, "The estimation of cement film thickness by an in vivo technique", Br Dent J, 131, pp.107~111 (1971)
- Jørgensen KD, "The relationship between the film thickness of zinc phosphate cement and the retention of veneer crowns", Acta Odontol Scand, 26, pp.169~175 (1968)
- Passon C, "The effect of multiple layers of die-spacer on crown retention", Oper Dent, 17, pp.42~49 (1992)
- Persson AS, "Computer aided analysis of digitized dental stone replicas by dental CAD", CAM technology, 2008, pp.24, 1123~1130