Effect of cyclic loading and retightening on reverse torque value in external and internal implants
2
조회
0
다운로드
6
인용
0
참고문헌
키워드
초록
PURPOSE. The aim of this study was to evaluate the effect of cyclic loading and screw retightening on reverse torque value (RTV) in external and internal type implants. MATERIALS AND METHODS. Cement-retained abutments were connected with 30 Ncm torque to external and internal type implants. Experimental groups were classified according to implant connection type and retightening/loading protocol. In groups with no retightening, RTV was evaluated after cyclic loading for 100,000 cycles. In groups with retightening, RTV was measured after 3, 10, 100 cycles as well as every 20,000 cycles until 100,000 cycles of loading. RESULTS. Every group showed decreased RTV after cyclic loading. Before and after cyclic loading, external type implants had significantly higher RTVs than internal type implants. In external type implants, retightening did not affect the decrease in RTV. In contrast, retightening 5 times and retightening after 10 cycles of dynamic loading was effective for maintaining RTV in internal type implants. CONCLUSION. Retightening of screws is more effective in internal type implants than external type implants. Retightening of screws is recommended in the early stage of functional loading.
Abstract
PURPOSE. The aim of this study was to evaluate the effect of cyclic loading and screw retightening on reverse torque value (RTV) in external and internal type implants. MATERIALS AND METHODS. Cement-retained abutments were connected with 30 Ncm torque to external and internal type implants. Experimental groups were classified according to implant connection type and retightening/loading protocol. In groups with no retightening, RTV was evaluated after cyclic loading for 100,000 cycles. In groups with retightening, RTV was measured after 3, 10, 100 cycles as well as every 20,000 cycles until 100,000 cycles of loading. RESULTS. Every group showed decreased RTV after cyclic loading. Before and after cyclic loading, external type implants had significantly higher RTVs than internal type implants. In external type implants, retightening did not affect the decrease in RTV. In contrast, retightening 5 times and retightening after 10 cycles of dynamic loading was effective for maintaining RTV in internal type implants. CONCLUSION. Retightening of screws is more effective in internal type implants than external type implants. Retightening of screws is recommended in the early stage of functional loading.
참고문헌 (28)
- Binon PP, "Implants and components: entering the new millennium", Int J Oral Maxillofac Implants, 15, pp.76~94 (2000)
- Jung RE, "Systematic review of the survival rate and the incidence of biological, technical, and aesthetic complications of single crowns on implants reported in longitudinal studies with a mean follow-up of 5 years", Clin Oral Implants Res, 23, pp.2~21 (2012)
- Pjetursson BE, "A systematic review of the survival and complication rates of implant-supported fixed dental prostheses (FDPs) after a mean observation period of at least 5 years", Clin Oral Implants Res, 23, pp.22~38 (2012)
- Jemt T, "Osseointegrated implants for single tooth replacement: a 1-year report from a multicenter prospective study", Int J Oral Maxillofac Implants, 6, pp.29~36 (1991)
- Henry PJ, "Osseointegrated implants for singletooth replacement: a prospective 5-year multicenter study", Int J Oral Maxillofac Implants, 11, pp.450~455 (1996)
- Khraisat A, "Abutment screw loosening and bending resistance of external hexagon implant system after lateral cyclic loading", Clin Implant Dent Relat Res, 6, pp.157~164 (2004)
- Maeda Y, "In vitro differences of stress concentrations for internal and external hex implant-abutment connections: a short communication", J Oral Rehabil, 33, pp.75~78 (2006)
- Tsuge T, "Influence of lateral-oblique cyclic loading on abutment screw loosening of internal and external hexagon implants", Dent Mater J, 28, pp.373~381 (2009)
- Theoharidou A, "Abutment screw loosening in single-implant restorations: a systematic review", Int J Oral Maxillofac Implants, 23, pp.681~690 (2008)
- Bickford JH, "An introduction to the design and behavior of bolted joints" (1995), Marcel Dekker Inc
- Siamos G, "Relationship between implant preload and screw loosening on implant-supported prostheses", J Oral Implantol, 28, pp.67~73 (2002)
- Guzaitis KL, "Effect of repeated screw joint closing and opening cycles on implant prosthetic screw reverse torque and implant and screw thread morphology", J Prosthet Dent, 106, pp.159~169 (2011)
- Tzenakis GK, "The effect of repeated torque and salivary contamination on the preload of slotted gold implant prosthetic screws", J Prosthet Dent, 88, pp.183~191 (2002)
- Weiss EI, "Effect of repeated closures on opening torque values in seven abutment-implant systems", J Prosthet Dent, 84, pp.194~199 (2000)
- Ricciardi Coppedê A, "Effect of repeated torque", mechanical loading cycles on two different abutment types in implants with internal tapered connections: an in vitro study, 2009, pp.20, 624~632
- Andersson B, "Single-tooth restorations supported by osseointegrated implants: results and experiences from a prospective study after 2 to 3 years", Int J Oral Maxillofac Implants, 10, pp.702~711 (1995)
- Artzi Z, "A screw lock for single-tooth implant superstructures", J Am Dent Assoc, 130, pp.677~682 (1999)
- Schwarz MS, "Mechanical complications of dental implants", Clin Oral Implants Res, 11, pp.156~158 (2000)
- Cavazos E, "Preventing loosening of implant abutment screws", J Prosthet Dent, 75, pp.566~569 (1996)
- Park JK, "Effects of abutment screw coating on implant preload", J Prosthodont, 19, pp.458~464 (2010)
- McGlumphy EA, "Implant screw mechanics", Dent Clin North Am, 42, pp.71~89 (1998)
- Haack JE, "Elongation and preload stress in dental implant abutment screws", Int J Oral Maxillofac Implants, 10, pp.529~536 (1995)
- 김진만, "수종 임플랜트 지대주나사의 반복하중 후나사풀림에 관한 연구", 대한치과보철학회지, 41(4), pp.519~531 (2003), 대한치과보철학회
- Lee JH, "Axial displacements in external and internal implant-abutment connection", Clin Oral Implants Res, 25, pp.e83~e89 (2014)
- Kim KS, "Variation in the total lengths of abutment", implant assemblies generated with a function of applied tightening torque in external and internal implant-abutment connection, 2011, pp.22, 834~839
- Cardoso M, "Torque removal evaluation of prosthetic screws after tightening and loosening cycles: an in vitro study", Clin Oral Implants Res, 23, pp.475~480 (2012)
- Delben JA, "Evaluation of the effect of retightening and mechanical cycling on preload maintenance of retention screws", Int J Oral Maxillofac Implants, 26, pp.251~256 (2011)
- Binon PP, "The effect of eliminating implant", abutment rotational misfit on screw joint stability, 1996, pp.9, 511~519