Comparative fracture strength analysis of Lava and Digident CAD/CAM zirconia ceramic crowns

키워드

참고문헌 (27)

1. Ku CW, "Comparison of the fracture strengths of metal-ceramic crowns and three ceromer crowns", J Prosthet Dent, 88, pp.170~175 (2002)
2. Zahran M, "Fracture strength and fatigue resistance of all-ceramic molar crowns manufactured with CAD", CAM technology, 2008, pp.17, 370~377
3. Rosenstiel SF, "Contemporary fixed prosthodontics", pp.262~271 (2001), Mosby
4. Sjogren G, "Cytotoxicity of dental alloys, metals, and ceramics assessed by millipore filter, agar overlay, and MTT tests", J Prosthet Dent, 84, pp.229~236 (2000)
5. Siervo S, "Where is the gap? Machinable ceramic systems and conventional laboratory restorations at a glance", Quintessence Int, 25, pp.773~779 (1994)
6. Drummond JL, "Ceramic behavior under different environmental and loading conditions", pp.35~45 (2003), Quintessence
7. Rosenstiel SF, "Contemporary fixed prosthodontics", pp.643~672 (2001), Mosby
8. Evans AG, "Slow crack growth in brittle materials under dynamic loading conditions", Int J Fract, 10, pp.251~259 (1974)
9. Evans AG, "The Fracture stress and its dependence on slow crack growth", J Mater Sci, 10, pp.214~222 (1975)
10. Goodacre CJ, "Clinical complications in fixed prosthodontics", J Prosthet Dent, 90, pp.31~41 (2003)
11. Guazzato M, "Influence of surface and heat treatments on the flexural strength of Y-TZP dental ceramic", J Dent, 33, pp.9~18 (2005)
12. Guazzato M, "Strength, fracture toughness and microstructure of a selection of allceramic materials. Part II. Zirconia-based dental ceramics", Dent Mater, 20, pp.449~456 (2004)
13. Steger T, "Digident CAD", CAM production--growing with the possibilities, 2004, pp.7, 77~84
14. Piwowarczyk A, "A clinical report and overview of scientific studies and clinical procedures conducted on the 3M ESPE Lava All-Ceramic System", J Prosthodont, 14, pp.39~45 (2005)
15. White SN, "Flexural strength of a layered zirconia and porcelain dental all-ceramic system", J Prosthet Dent, 94, pp.125~131 (2005)
16. Luthardt RG, "Zirconia-TZP and alumina--advanced technologies for the manufacturing of single crowns", Eur J Prosthodont Restor Dent, 7, pp.113~119 (1999)
17. Snyder MD, "Load-to-fracture value of different all-ceramic crown systems", J Contemp Dent Pract, 6, pp.5463~ (2005)
18. Sundh A, "A comparison of fracture strength of yttrium-oxide-partially-stabilized zirconia ceramic crowns with varying core thickness, shapes and veneer ceramics", J Oral Rehabil, 31, pp.682~688 (2004)
19. Vult von Steyern P, "Fracture strength of two oxide ceramic crown systems after cyclic pre-loading and thermocycling", J Oral Rehabil, 33, pp.682~689 (2006)
20. Wood KC, "Resistance to fracture of two all-ceramic crown materials following endodontic access", J Prosthet Dent, 95, pp.33~41 (2006)
21. Kelly JR, "Clinically relevant approach to failure testing of allceramic restorations", J Prosthet Dent, 81, pp.652~661 (1999)
22. Scherrer SS, "The fracture resistance of all-ceramic crowns on supporting structures with different elastic moduli", Int J Prosthodont, 6, pp.462~467 (1993)
23. Potiket N, "In vitro fracture strength of teeth restored with different all-ceramic crown systems", J Prosthet Dent, 92, pp.491~495 (2004)
24. Baldassarri M, "Residual stresses in porcelain-veneered zirconia prostheses", Dent Mater, 28, pp.873~879 (2012)
25. Rosentritt M, "Fracture performance of computer-aided manufactured zirconia and alloy crowns", Quintessence Int, 40, pp.655~662 (2009)
26. Beuer F, "High-strength CAD", CAM-fabricated veneering material sintered to zirconia copings-a new fabrication mode for all-ceramic restorations, 2009, pp.25, 121~128
27. Guazzato M, "Strength, reliability and mode of fracture of bilayered porcelain", zirconia (Y-TZP) dental ceramics, 2004, pp.25, 5045~5052

관련 논문AI추천