흡착압력에 따른 수직 평판유리 변형특성에 대한 구조해석
Structural Analysis on Deformation Characteristics of Vertical Flat Glass by Adsorption Pressure
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this study, the flat glass and adsorption pad were modeled using SolidWorks Simulation, to understand the deformation characteristics of the vertical flat glass by the adsorption pressure during vertical transport of LCD. The horizontal and vertical displacements and equivalent stresses of the flat glass were investigated by the structural analysis. From the displacement and stress visualization according to the adsorption pressure, the higher the adsorption pressure, the larger the glass surface protruded. The horizontal deformation of flat glass increased with increasing thickness and the vertical deformation increased with decreasing thickness. In addition, the maximum equivalent stress applied to the flat glass increased significantly as the adsorption pressure increased and the thickness decreased. As a result of the structural analysis, the thinner the thickness of the plate glass, the greater the effect on the adsorption pressure. Especially, the effect of the adsorption pressure was clearly observed at the thickness of 0.5mm.
Abstract
In this study, the flat glass and adsorption pad were modeled using SolidWorks Simulation, to understand the deformation characteristics of the vertical flat glass by the adsorption pressure during vertical transport of LCD. The horizontal and vertical displacements and equivalent stresses of the flat glass were investigated by the structural analysis. From the displacement and stress visualization according to the adsorption pressure, the higher the adsorption pressure, the larger the glass surface protruded. The horizontal deformation of flat glass increased with increasing thickness and the vertical deformation increased with decreasing thickness. In addition, the maximum equivalent stress applied to the flat glass increased significantly as the adsorption pressure increased and the thickness decreased. As a result of the structural analysis, the thinner the thickness of the plate glass, the greater the effect on the adsorption pressure. Especially, the effect of the adsorption pressure was clearly observed at the thickness of 0.5mm.
참고문헌 (7)
- 장시열, "진공척 흡착패드 형태에 따른 대면적 임프린팅 균일 접촉 향상 연구", 한국트라이볼로지학회지, 24(6), pp.326~331 (2008), 한국트라이볼로지학회
- 김준현, "다공성 패드를 갖는 챔버의 배열에 따른 공기 부상 테이블의 비접촉 부상 수준에 대한 연구", 한국생산제조학회지, 22(6), pp.913~920 (2013), 한국생산제조학회[DOI]
- W. Y. Sung, "A Study on the Pressure and Speed of Robot for Transferring Thin LCD Glasses", pp.2013
- 황성현, "비접촉 평판 디스플레이 이송장치에서 양력을 고려한 평판 디스플레이의 처짐 해석", 대한기계학회논문집 A, 32(5), pp.451~457 (2008), 대한기계학회
- T. O. Tak, "Vibration Attenuation Study for An LCD Pannel Handling Robot", Journal of Industrial Technology, 24(B), pp.73~81 (2004)
- 노태정, "FPD용 공기부상 이송컨베이어 시스템 개발", 한국산학기술학회논문지, 10(1), pp.39~45 (2009), 한국산학기술학회
- Dassault Systems Solidworks Co, "Solidworks Simulation Manual", ~ (2016)