패널 이송용 정렬장치의 구조 및 진동해석
Structure and Vibration Analysis of Align Unit for Panel Transfer
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this study, the structural stability of an align unit was studied to investigate the deformation and vibration characteristics of the upper and lower modules of the align unit during LCD panel transfer. The align unit consists of upper module and lower module. SolidWorks Simulation was used to analyze the structure, fatigue, and modes, to understand the deformation and vibration of the stiffness of the align unit. Because of the upper eccentric structure of the align unit, the main strain was large at the contact of the upper and lower modules and at the bottom of the support, and more pronounced at it’s front. The stress was large in the front support of the upper and lower modules, and the displacement was observed in the front of the upper module. The minimum life cycle that indicates the structural integrity of the align unit has exceeded its usable number. Also, the increase in natural frequency of the align unit gradually slowed down, as the vibration mode increased.
Abstract
In this study, the structural stability of an align unit was studied to investigate the deformation and vibration characteristics of the upper and lower modules of the align unit during LCD panel transfer. The align unit consists of upper module and lower module. SolidWorks Simulation was used to analyze the structure, fatigue, and modes, to understand the deformation and vibration of the stiffness of the align unit. Because of the upper eccentric structure of the align unit, the main strain was large at the contact of the upper and lower modules and at the bottom of the support, and more pronounced at it’s front. The stress was large in the front support of the upper and lower modules, and the displacement was observed in the front of the upper module. The minimum life cycle that indicates the structural integrity of the align unit has exceeded its usable number. Also, the increase in natural frequency of the align unit gradually slowed down, as the vibration mode increased.
참고문헌 (9)
- 추세웅, "LED 융합조명 모듈 자동화 조립 시스템의 피더에 관한 구조해석 및 동특성 해석", 한국기계가공학회지, 16(1), pp.124~133 (2017), 한국기계가공학회[DOI]
- 이홍윤, "디젤기관용 Urea-SCR 시스템 펌프 기어에 관한 구조해석", 한국자동차공학회 논문집, 24(1), pp.10~15 (2016), 한국자동차공학회[DOI]
- 이춘만, "유압실린더를 사용한 가압식 DC(Dust Cake)필터 장치의 구조해석 및 구조 개선에 관한 연구", 한국정밀공학회지, 36(2), pp.135~139 (2019), 한국정밀공학회[DOI]
- 김영춘, "반도체 테스트 핸들러 픽커 검사장비 프레임에 대한 구조 및 피로해석", 한국산학기술학회논문지, 15(10), pp.5906~5911 (2014), 한국산학기술학회[DOI]
- 왕쩐후안, "인가 하중에 따른 센터필러의 구조해석", 한국기계기술학회지, 20(4), pp.401~406 (2018), 한국기계기술학회[DOI]
- 이정선, "착륙장치 작동기 내부 잠금장치 피로해석", 대한기계학회논문집 A, 36(1), pp.91~96 (2012), 대한기계학회
- 허장욱, "항공기 엔진 지지구조물의 피로수명 해석에 관한 연구", 대한기계학회논문집 A, 34(11), pp.1667~1674 (2010), 대한기계학회
- 김성균, "정지 유체 내에 있는 회전시료 조사대의 고유진동수 및 모드 해석", 대한기계학회논문집 A, 27(8), pp.1317~1323 (2003), 대한기계학회
- Dassault Systems Solidworks Co, "Solidworks Simulation Manual", ~ (2016)