광대역 전자기유도 에너지 수확기의 비선형 동적 거동에 대한 매개변수 연구
A Parametric Study on the Nonlinear Dynamic Behaviors of a Broadband Electromagnetic Energy Harvester
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this study, the frequency response analysis of a bistable electromagnetic vibration energy harvester is performed, based on an electromagnetic oscillator model, to investigate its nonlinear dynamic behaviors. The displacement and current responses are obtained, by the direct integration of the model, with the variations of mechanical and electromagnetic parameters. It is shown that the operating frequency band of the system can be broadened by the increase in mechanical parameters(inertial mass and Q-factor), but it does not depend significantly on any electromagnetic parameters(an external load resistance and the internal resistance of a coil). On the other hand, the output current of the energy harvester is affected only by the electromagnetic parameters (specifically, the sum of two resistances). Thus, the mechanical and electromagnetic parameters of the electromagnetic energy harvester must be designed properly, respectively, for broader and more efficient performance.
Abstract
In this study, the frequency response analysis of a bistable electromagnetic vibration energy harvester is performed, based on an electromagnetic oscillator model, to investigate its nonlinear dynamic behaviors. The displacement and current responses are obtained, by the direct integration of the model, with the variations of mechanical and electromagnetic parameters. It is shown that the operating frequency band of the system can be broadened by the increase in mechanical parameters(inertial mass and Q-factor), but it does not depend significantly on any electromagnetic parameters(an external load resistance and the internal resistance of a coil). On the other hand, the output current of the energy harvester is affected only by the electromagnetic parameters (specifically, the sum of two resistances). Thus, the mechanical and electromagnetic parameters of the electromagnetic energy harvester must be designed properly, respectively, for broader and more efficient performance.
참고문헌 (11)
- Andò, B., "Autonomous sensors: From standard to advanced solutions", IEEE Mag. Instrum. Meas, 13, pp.33~37 (2010)
- Nabavi, S, "Portable Wind Energy Harvesters for Low-Power Applications: A Survey", Sensors, 16, pp.1101~ (2016)
- Harne, R.L, "A review of the recent research on vibration energy harvesting via bistable systems", Smart Mater. Struct, 22, pp.023001~ (2013)
- Daqaq, M.F., "On the role of nonlinearities in vibratory energy harvesting: A critical review and discussion", Appl. Mech. Rev, 66, pp.040801~ (2014)
- Stanton, S.C, "Nonlinear piezoelectricity in electroelastic energy harvesters: Modeling and experimental identification", J. Appl. Phys, 108, pp.074903~ (2010)
- Kim, P, "Resonant behaviors of a nonlinear cantilever beam with tip mass subject to an axial force and electrostatic excitation", Int. J. Mech. Sci, 64, pp.232~257 (2012)
- Abdelkefi, A, "Global nonlinear distributed-parameter model of parametrically excited piezoelectric energy harvesters", Nonlinear Dyn, 67, pp.1147~1160 (2012)
- Cottone, F., "Nonlinear energy harvesting", Phys. Rev. Lett, 102, pp.080601~ (2009)
- Cao, J., "Broadband tristable energy harvester: Modeling and experiment verification", Appl. Energy, 133, pp.33~39 (2014)
- Kim, P., "Triple-well potential with a uniform depth: Advantageous aspects in designing a multistable energy harvester", Appl. Phys. Lett, 108, pp.243902~ (2016)
- Huguet, T, "Exploiting bistable oscillator subharmonics for magnified broadband vibration energy harvesting", Appl. Phys. Lett, 111, pp.173905~ (2017)