Magnetic Plucking을 이용한 압전 에너지 수확기의 동특성에 관한 연구
A Study on the Dynamic Characteristics of a Piezoelectric Energy Harvester with Magnetic Plucking Mechanism
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In order to overcome the limitations of linear vibration energy harvesters and those using mechanical plucking, magnetic plucking vibration energy harvesters (MVEs) have garnered significant interest. This paper presents parametric studies aimed at proposing design guidelines for MVEs and compares two magnetic force models that describe interactions between two permanent magnets. A mathematical model describing the energy harvester is employed, followed by the introduction of two magnetic force models: an analytic model and an inverse square model. Subsequently, numerical simulations are conducted to investigate dynamic characteristics of MVEs, analyzing results in terms of tip displacement, voltage output, and harvested energy. Parametric studies vary the distance between magnets, the speed of the external magnet, and the beam shape. Results indicate that reducing the distance between magnets enhances energy harvesting effectiveness. An optimal velocity for the external magnet is observed, and studies on beam shape suggest greater energy harvesting when the shape favors deflection.
Abstract
In order to overcome the limitations of linear vibration energy harvesters and those using mechanical plucking, magnetic plucking vibration energy harvesters (MVEs) have garnered significant interest. This paper presents parametric studies aimed at proposing design guidelines for MVEs and compares two magnetic force models that describe interactions between two permanent magnets. A mathematical model describing the energy harvester is employed, followed by the introduction of two magnetic force models: an analytic model and an inverse square model. Subsequently, numerical simulations are conducted to investigate dynamic characteristics of MVEs, analyzing results in terms of tip displacement, voltage output, and harvested energy. Parametric studies vary the distance between magnets, the speed of the external magnet, and the beam shape. Results indicate that reducing the distance between magnets enhances energy harvesting effectiveness. An optimal velocity for the external magnet is observed, and studies on beam shape suggest greater energy harvesting when the shape favors deflection.
참고문헌 (19)
- H. Elahi, "Energy harvesting towards self-powered IoT devices", Energies, 13(21), pp.5528~ (2020)
- S. Zeadally, "Design architectures for energy harvesting in the Internet of Things", Renewable and Sustainable Energy Reviews, 128, pp.109901~ (2020)
- S. Sudevalayam, "Energy harvesting sensor nodes : Survey and implications", IEEE communications surveys & tutorials, 13(3), pp.443~461 (2010)
- K. A. Cook-Chennault, "Powering MEMS portable devices—a review of non-regenerative and regenerative power supply systems with special emphasis on piezoelectric energy harvesting systems", Smart materials and structures, 17(4), pp.043001~ (2008)
- A. Mohanty, "Vibration energy harvesting : A review", Journal of Advanced Dielectrics, 9(04), pp.1930001~ (2019)
- S. Roundy, "A study of low level vibrations as a power source for wireless sensor nodes", Computer communications, 26(11), pp.1131~1144 (2003)
- S. S. Lee, "Self-excited piezoelectric cantilever oscillators", Sensors and Actuators A: physical, 52(1-3), pp.41~45 (1996)
- R. Amirtharajah, "Selfpowered signal processing using vibration-based power generation", IEEE journal of solid-state circuits, 33(5), pp.687~695 (1998)
- P. Kim, "Dynamic and energetic characteristics of a tri-stable magnetopiezoelastic energy harvester", Mechanism and Machine Theory, 94, pp.41~63 (2015)
- J. Noh, "Nonlinear dynamic analysis of a piezoelectric energy harvester with mechanical plucking mechanism", Sensors, 23(13), pp.5978~ (2023)
- M. Pozzi, "Magnetic plucking of piezoelectric bimorphs for a wearable energy harvester", Smart Materials and Structures, 25(4), pp.045008~ (2016)
- Y. Kuang, "Design and characterisation of a piezoelectric knee-joint energy harvester with frequency up-conversion through magnetic plucking", Smart Materials and Structures, 25(8), pp.085029~ (2016)
- P. Pillatsch, "Magnetic plucking of piezoelectric beams for frequency up-converting energy harvesters", Smart Materials and Structures, 23(2), pp.025009~ (2013)
- R. Dauksevicius, "Analysis of magnetic plucking dynamics in a frequency up-converting piezoelectric energy harvester", Smart Materials and Structures, 27(8), pp.085016~ (2018)
- M. Rosso, "Numerical and experimental evaluation of the magnetic interaction for frequency up-conversion in piezoelectric vibration energy harvesters", Meccanica, 57(5), pp.1139~1154 (2022)
- T. Xue, "On magnetic plucking configurations for frequency up-converting mechanical energy harvesters", Sensors and Actuators A:Physical, 253, pp.101~111 (2017)
- R. Ardito, "Advanced model for fast assessment of piezoelectric micro energy harvesters", Frontiers in materials, 3, pp.17~ (2016)
- P. Kim, "Phase-dependent dynamic potential of magnetically coupled two-degree-of-freedom bistable energy harvester", Scientific reports, 6(1), pp.34411~ (2016)
- H. Allag, "3-D analytical calculation of the torque and force exerted between two cuboidal magnets", IEEE Transactions on Magnetics, 45(10), pp.3969~3972 (2009)