Piecewise Potential Function을 갖는 쌍안정 에너지 수확기의 비선형 동특성 해석
Nonlinear Dynamic Analysis of a Bistable Energy Harvester with a Piecewise Potential Function
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this study, a bistable energy harvester (BEH) with a piecewise potential function is proposed to improve its energy harvesting performance. A mathematical model of the piecewise BEH (PWBEH) system is established first and a series of numerical simulation are performed, based on the developed model, in order to investigate the nonlinear dynamic behaviors and energy-harvesting performance of the system. The analysis results for the proposed PWBEH system are compared with a conventional BEH (CBEH). The frequency response results show the stiffness-softening interwell motion of the PWBEH, due to the piecewise potential energy function, which is contrary to the stiffness-hardening behavior of the CBEH. Such softening behavior of interwell motion tends to reduce the operating frequency of the BEH, while significantly increasing the output power. This observation indicate that the introduction of the piecewise potential function to a BEH would be beneficial to the system design for enhancing enegy-harvesting performance at the cost of redundant frequency band, which depends on the characteristics of environmental vibration sources.
Abstract
In this study, a bistable energy harvester (BEH) with a piecewise potential function is proposed to improve its energy harvesting performance. A mathematical model of the piecewise BEH (PWBEH) system is established first and a series of numerical simulation are performed, based on the developed model, in order to investigate the nonlinear dynamic behaviors and energy-harvesting performance of the system. The analysis results for the proposed PWBEH system are compared with a conventional BEH (CBEH). The frequency response results show the stiffness-softening interwell motion of the PWBEH, due to the piecewise potential energy function, which is contrary to the stiffness-hardening behavior of the CBEH. Such softening behavior of interwell motion tends to reduce the operating frequency of the BEH, while significantly increasing the output power. This observation indicate that the introduction of the piecewise potential function to a BEH would be beneficial to the system design for enhancing enegy-harvesting performance at the cost of redundant frequency band, which depends on the characteristics of environmental vibration sources.
참고문헌 (11)
- B. Andò, "Autonomous sensors : from standard to advanced solutions", IEEE Instrum. Meas. Mag, 13(3), pp.33~37 (2010)
- L. R. Garcia, "A review of wireless sensor technologies and applications in agriculture and food industry : state of the art and current trends", Sensors, 9(6), pp.4728~4750 (2009)
- S. Roundy, "A study of low-level vibrations as a power source for wireless sensor nodes", Comput. Commun, 26(11), pp.1131~1144 (2003)
- S. R. Anton, "A review of power harvesting using piezoelectric materials(2003–2006)", Smart Mater. Struct, 16R1 (2007)
- L. Gammaitoni, "Nonlinear Oscillators for Vibration Energy Harvesting", Appl. Phys. Lett, (16), pp.164102~ (2009)
- A. Triplett, "The effect of non-linear piezoelectric coupling on vibration-based energy harvesting", J. Intell. Mater. Syst. Struct, 20, pp.1959~1966 (2009)
- P. Kim, "Resonant behaviors of a nonlinear cantilever beam with tip mass subject to an axial force and electrostatic excitation", Int. J. Mech. Sci, 64, pp.232~257 (2012)
- S. C. Stanton, "Reversible hysteresis for broadband magnetopiezoelastic energy harvesting", Appl. Phys. Lett, 95, pp.174103~ (2009)
- F. Cottone, "Nonlinear energy harvesting", Phys. Rev. Lett, 102, pp.080601~ (2009)
- B. P. Mann, "Energy harvesting from the nonlinear oscillations of magnetic levitation", J Sound Vib, 319, pp.515~530 (2009)
- P. Kim, "Phase-dependent dynamic potential of magnetically coupled two-degree-of-freedom bistable energy harvester", Sci. Rep, 6, pp.34411~ (2016)