액화 헬륨 조건에서 극저온 접착제 Lap shear strength test 시 기계물성 변화 및 실험 개선에 대한 연구
Research for Change of Mechanical Properties of Cryogenic Adhesive with Lap Shear Strength Test in Liquified Helium Condition and Improvement of Test
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Conversion to modern hydrogen energy is required, and research on liquefied hydrogen cargo containment systems is needed for large-capacity transport and storage. In this study, changes in the mechanical properties of the adhesive required for storage and transport in liquid hydrogen were confirmed. The lap shear test was performed by realizing cryogenic conditions in a small chamber using liquid nitrogen and liquid helium. There was an increase of 11.0% in the -180℃ condition compared to room temperature, and an increase of 1.8% in the -230℃ condition compared to the -180℃ condition was confirmed. In the case of shear strain, it is known that it decreases as the temperature goes down. As a result of the experiment, it was confirmed that the value at room temperature and the value at -180℃ reduced the shear strain by 5.0%, and -230˚ compared to the -180℃ condition. An increase of 1.5% was confirmed in the C condition. In the case of the specimen tested at -230℃, the deformation in the gripper part was larger than in other tests, and it is judged that the maximum shear strength and shear strain were affected. In addition, in this study, there is a limitation in the experiment at -230°C rather than 253°C, which is the boiling point of hydrogen.
Abstract
Conversion to modern hydrogen energy is required, and research on liquefied hydrogen cargo containment systems is needed for large-capacity transport and storage. In this study, changes in the mechanical properties of the adhesive required for storage and transport in liquid hydrogen were confirmed. The lap shear test was performed by realizing cryogenic conditions in a small chamber using liquid nitrogen and liquid helium. There was an increase of 11.0% in the -180℃ condition compared to room temperature, and an increase of 1.8% in the -230℃ condition compared to the -180℃ condition was confirmed. In the case of shear strain, it is known that it decreases as the temperature goes down. As a result of the experiment, it was confirmed that the value at room temperature and the value at -180℃ reduced the shear strain by 5.0%, and -230˚ compared to the -180℃ condition. An increase of 1.5% was confirmed in the C condition. In the case of the specimen tested at -230℃, the deformation in the gripper part was larger than in other tests, and it is judged that the maximum shear strength and shear strain were affected. In addition, in this study, there is a limitation in the experiment at -230°C rather than 253°C, which is the boiling point of hydrogen.
참고문헌 (15)
- C. Pyo, "A Study on Welding Deformation in Fiber Laser Welding of 9% Nickel Steel through Finite Element Analysis Part I: Implementation of Welding Heat Source Model", Processes, 9(12), pp.2188~ (2021)[DOI]
- M. Asadnia, "Large-scale liquid hydrogen production methods and approaches : A review", Applied energy, 212(15), pp.57~83 (2018)
- 노원준, "액화천연가스(LNG)를 사용한 수소 생산 및 액화 공정 개발", Korean Chemical Engineering Research(HWAHAK KONGHAK), 59(2), pp.200~208 (2021), 한국화학공학회
- F. Dawood, "Hydrogen production for energy : An overview", International journal of hydrogen energy, 45(7), pp.3847~3869 (2020)
- I. Dincer, "Innovation in hydrogen production", International journal of hydrogen energy, 42(22), pp.14843~14864 (2017)
- 강상국, "복합재-알루미늄 양면겹치기 조인트를 이용한 접착제의 극저온 물성 평가", Composites Research, 19(4), pp.23~30 (2006), 한국복합재료학회
- 오현주, "극저온 환경에서 에폭시 접착제의 물성 향상을 위한 나노 보강재의 표면 개질에 관한 연구", Composites Research, 26(2), pp.129~134 (2013), 한국복합재료학회
- 손민영, "극저온에서 유리섬유강화플라스틱 표면의 유리섬유와 폴리우레탄 접착제간의 접착특성이 전체 박리강도에 미치는 영향에 대한 연구", Composites Research, 22(4), pp.13~19 (2009), 한국복합재료학회
- H. Ma, "Enhancement on mechanical strength of adhesively-bonded composite lap joints at cryogenic environment using coiled carbon nanotubes", Composites Part B: Engineering, 110, pp.396~401 (2017)
- C. Bang, "Performance improvement by glass fiber of adhesively bonded metal joints at the cryogenic temperature", Composite Structures, 96, pp.321~333 (2013)
- Yalin Zhao, "Effect of free volume on cryogenic mechanical properties of epoxy resin reinforced by hyperbranched polymers", Materials & Design, 202, pp.109565~ (2021)
- Tomo Takeda, "Cryogenic mechanical properties of woven glass", epoxy composites modified with multi-walled carbon nanotube and n-butyl glycidyl ether under tensile static and cyclic loadings, 2013, pp.58, 33~37
- Yu Liu, "Mechanical properties of cryogenic epoxy adhesives : Effects of mixed curing agent content", International Journal of Adhesion and Adhesives, 41, pp.113~118 (2013)
- Lei Pan, "Enhancing interfacial strength between AA5083 and cryogenic adhesive via anodic oxidation and silanization", International Journal of Adhesion and Adhesives, 84, pp.317~332 (2018)
- M. Ahn, "Effect of Surface Treatment on Adhesive Bonding Strengh of Composite Material for Cryogenic Application", Proceedings of the KWS Conference, 28 (2010)