최적화 알고리즘과 유한요소해석을 연동한 초저온용 접착제 전단 평가 시편 설계
Optimization-Driven Design of Lap Shear Specimens for Cryogenic Adhesives Using Finite Element Analysis
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Liquid hydrogen, a promising energy carrier, necessitates robust storage and transportation systems due to its extremely low boiling point. Consequently, the development of reliable cryogenic adhesives and standardized testing protocols is crucial. This study focused on optimizing the design of a gripper used in single lap shear tests for evaluating cryogenic adhesives, specifically targeting the challenges posed by low-temperature conditions that induce slippage at the gripper interface. The optimal design was performed using a total of five variables, including the position and size of the gripper. By employing the genetic algorithm coupled with finite element analysis, we exhaustively searched through over 1000 models to identify the optimal gripper geometry. We successfully minimized stress concentration at the gripper region while maintaining a uniform stress distribution on the non-bonded surface. Furthermore, the study explored the impact of symmetric versus asymmetric gripper configurations on test results. The findings revealed that symmetric grippers generally yielded more consistent and reliable data. This study's results enable the accurate and stable execution of lap shear tests under the temperature conditions of liquefied hydrogen.
Abstract
Liquid hydrogen, a promising energy carrier, necessitates robust storage and transportation systems due to its extremely low boiling point. Consequently, the development of reliable cryogenic adhesives and standardized testing protocols is crucial. This study focused on optimizing the design of a gripper used in single lap shear tests for evaluating cryogenic adhesives, specifically targeting the challenges posed by low-temperature conditions that induce slippage at the gripper interface. The optimal design was performed using a total of five variables, including the position and size of the gripper. By employing the genetic algorithm coupled with finite element analysis, we exhaustively searched through over 1000 models to identify the optimal gripper geometry. We successfully minimized stress concentration at the gripper region while maintaining a uniform stress distribution on the non-bonded surface. Furthermore, the study explored the impact of symmetric versus asymmetric gripper configurations on test results. The findings revealed that symmetric grippers generally yielded more consistent and reliable data. This study's results enable the accurate and stable execution of lap shear tests under the temperature conditions of liquefied hydrogen.
참고문헌 (13)
- Pyo, C, "A study on a representative heat source model for simulating laser welding for liquid hydrogen storage containers", Marine Structures, 36, pp.103260~ (2022)
- H. Oh, "The Effect of the Core-shell Structured Meta-aramid", Epoxy Nanofiber Mats on Interfacial Bonding Strength with an Epoxy Adhesive in Cryogenic Environments, 2013, pp.26(2), 129~134
- Yu Liu, "Mechanical properties of cryogenic epoxy adhesives : Effects of mixed curing agent content", International Journal of Adhesion and Adhesives, 41, pp.113~118 (2013)
- H. Ma, "Enhancement on mechanical strength of adhesively-bonded composite lap joints at cryogenic environment using coiled carbon nanotubes", Composites Part B : Engineering, 110, pp.396~401 (2017)
- Lei Pan, "Enhancing interfacial strength between AA5083 and cryogenic adhesive via anodic oxidation and silanization", International Journal of Adhesion and Adhesives, 84, pp.317~332 (2018)
- Yalin Zhao, "Effect of free volume on cryogenic mechanical properties of epoxy resin reinforced by hyperbranched polymers", Materials & Design, 202, pp.109565~ (2021)
- Chang-Min Pyo, "Research for Change of Mechanical Properties of Cryogenic Adhesive in Liquified Helium Condition", Journal of the Korean Society of Mechanical Technology, 23(6), pp.1064~1069 (2021)
- Chang-Min Pyo, "Research for Development of Test Method for Adhesive with Lap Shear Strength Test for Liquid Hydrogen Storage and Change of Mechanical Properties Through Temperature", Journal of the Korean Society of Mechanical Technology, 25(3), pp.297~302 (2023)
- Chang-Min Pyo, "Optimization of specimen for lap shear test of cryogenic adhesives under liquid hydrogen condition", Journal of the Korean Society of Mechanical Technology, 26(3), pp.507~512 (2024)
- Pankaj P, "Three dimensional FE thermal analysis for friction stir welding of low carbon steel", Materials Today: Proceedings, 41, pp.902~907 (2021)
- Imran M, "Design optimization of composite submerged cylindrical pressure hull using genetic algorithm and finite element analysis", Ocean Engineering, 190, pp.106443~ (2019)
- Pyo C., "Estimation of Heat Source Model’s Parameters for GMAW with Non-linear Global Optimization—Part I : Application of Multi-island Genetic Algorithm", Metals, 10(7), pp.885~ (2020)
- Katoch, S., "A review on genetic algorithm : past, present, and future", Multimed Tools Appl, 80, pp.8091~8126 (2021)