액화 수소 저장 용기 적용을 위한 접착제의 전단강도 평가 방법 구현 및 온도에 따른 재료 물성 변화에 관한 연구
Research for Development of Test Method for Adhesive with Lap Shear Strength Test for Liquid Hydrogen Storage and Change of Mechanical Properties Through Temperature
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
In order to respond to environmental pollution, developed countries, including Korea, have begun to conduct research to utilize hydrogen energy. For mass transfer of hydrogen energy, storage as liquid hydrogen is advantageous, and in this case, the volume can be reduced to 1/800. As such, the transportation technology of liquefied hydrogen for ships is expected to be needed in the near future, but there is no commercialized method yet. This study is a study on the technology to test the performance of the components constituting the membrane type storage container in a cryogenic environment as a preparation for the above. It is a study to find a way to respond by analyzing in advance the problems that may occur during the shear test of adhesives. Through this study, the limitations of ISO4587 were analyzed, and in order to cope with this, the specimen was supplemented so that fracture occurred in the adhesive, not the adhesive gripper, by using stainless steel, a low-temperature steel, to reinforce the thickness. Based on this, shear evaluation was performed under conditions lowered to minus 243℃, and it was confirmed that the breaking strength was higher at cryogenic temperatures.
Abstract
In order to respond to environmental pollution, developed countries, including Korea, have begun to conduct research to utilize hydrogen energy. For mass transfer of hydrogen energy, storage as liquid hydrogen is advantageous, and in this case, the volume can be reduced to 1/800. As such, the transportation technology of liquefied hydrogen for ships is expected to be needed in the near future, but there is no commercialized method yet. This study is a study on the technology to test the performance of the components constituting the membrane type storage container in a cryogenic environment as a preparation for the above. It is a study to find a way to respond by analyzing in advance the problems that may occur during the shear test of adhesives. Through this study, the limitations of ISO4587 were analyzed, and in order to cope with this, the specimen was supplemented so that fracture occurred in the adhesive, not the adhesive gripper, by using stainless steel, a low-temperature steel, to reinforce the thickness. Based on this, shear evaluation was performed under conditions lowered to minus 243℃, and it was confirmed that the breaking strength was higher at cryogenic temperatures.
참고문헌 (18)
- Hydrogen Economy Trends in Major Countries and Strategies for Korean Companies, "Kotra", ~, pp.Global Market Report 22-003 (2022)
- International Energy Agency, "Net zero by 2050 A roadmap for the global energy sector", ~ (2021)
- AR6 Synthesis Report: Climate Change 2022, "ICPP", ~ (2022)
- Report of the Conference of the Parties on its twenty-first session, "UN", ~ (2015)
- Ministry of Trade, Industry and Energy, "Explore the world's first hydrogen law", ~ (2021)
- S. Yu, "The reality of hydrogen and the future of the hydrogen economy", Technology & Innovation, 455 (2022)
- C. Pyo, "A study on a representative heat source model for simulating laser welding for liquid hydrogen storage containers", Marine Structures, 86, pp.103260~ (2022)
- 강상국, "복합재-알루미늄 양면겹치기 조인트를 이용한 접착제의 극저온 물성 평가", Composites Research, 19(4), pp.23~30 (2006), 한국복합재료학회
- 오현주, "극저온 환경에서 에폭시 접착제의 물성 향상을 위한 나노 보강재의 표면 개질에 관한 연구", Composites Research, 26(2), pp.129~134 (2013), 한국복합재료학회
- 손민영, "극저온에서 유리섬유강화플라스틱 표면의 유리섬유와 폴리우레탄 접착제간의 접착특성이 전체 박리강도에 미치는 영향에 대한 연구", Composites Research, 22(4), pp.13~19 (2009), 한국복합재료학회
- H. Ma, "Enhancement on mechanical strength of adhesively-bonded composite lap joints at cryogenic environment using coiled carbon nanotubes", Composites Part B: Engineering, 110, pp.396~401 (2017)
- C. Bang, "Performance improvement by glass fiber of adhesively bonded metal joints at the cryogenic temperature", Composite Structures, 96, pp.321~333 (2013)
- Yalin Zhao, "Effect of free volume on cryogenic mechanical properties of epoxy resin reinforced by hyperbranched polymers", Materials & Design, 202, pp.109565~ (2021)
- Tomo Takeda, "Cryogenic mechanical properties of woven glass", epoxy composites modified with multi-walled carbon nanotube and n-butyl glycidyl ether under tensile static and cyclic loadings, 2013, pp.58, 33~37
- Yu Liu, "Mechanical properties of cryogenic epoxy adhesives : Effects of mixed curing agent content", International Journal of Adhesion and Adhesives, 41, pp.113~118 (2013)
- Lei Pan, "Enhancing interfacial strength between AA5083 and cryogenic adhesive via anodic oxidation and silanization", International Journal of Adhesion and Adhesives, 84, pp.317~332 (2018)
- M. Ahn, "Effect of Surface Treatment on Adhesive Bonding Strengh of Composite Material for Cryogenic Application", Proceedings of the KWS Conference, 28 (2010)
- 표창민, "액화 헬륨 조건에서 극저온 접착제 Lap shear strength test 시 기계물성 변화 및 실험 개선에 대한 연구", 한국기계기술학회지, 24(1), pp.78~84 (2022), 한국기계기술학회[DOI]