선박용 9%니켈강 소재 고효율 서브머지드 아크 용접 실험적 연구
Experimental Study of High-efficiency SAW Welding of 9% Nickel Steel for Ships
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Due to the environmental regulations of the International Maritime Organization (IMO), the number of ships using cryogenic fuel such as LNG (liquefied natural gas) is increasing rapidly, and the demand for eco-friendly ships is expected to grow further in the future. The material of the tank for storing cryogenic fuel such as LNG is limited within the IGC Code, and available materials include 9% nickel steel, Invar (36% nickel steel), Al5083-0, STS304L, and high manganese steel. Recently, 9% nickel steel has been used as a tank in LNG fuel-powered ship projects, and it has excellent thermal/mechanical properties in cryogenic LNG environmental conditions (-163°C). In this study, it is conducted an experimental study on SAW(Submerged Arc welding), which has better welding efficiency than FCAW(Flux Cored Arc Welding), which is mainly used for 9% nickel steel materials. In addition, to verify the reliability of the welded part after the welding test, cross-sectional observation of the welded part was performed and the mechanical properties such as the tensile strength and cryogenic impact strength of the welded part were evaluated.
Abstract
Due to the environmental regulations of the International Maritime Organization (IMO), the number of ships using cryogenic fuel such as LNG (liquefied natural gas) is increasing rapidly, and the demand for eco-friendly ships is expected to grow further in the future. The material of the tank for storing cryogenic fuel such as LNG is limited within the IGC Code, and available materials include 9% nickel steel, Invar (36% nickel steel), Al5083-0, STS304L, and high manganese steel. Recently, 9% nickel steel has been used as a tank in LNG fuel-powered ship projects, and it has excellent thermal/mechanical properties in cryogenic LNG environmental conditions (-163°C). In this study, it is conducted an experimental study on SAW(Submerged Arc welding), which has better welding efficiency than FCAW(Flux Cored Arc Welding), which is mainly used for 9% nickel steel materials. In addition, to verify the reliability of the welded part after the welding test, cross-sectional observation of the welded part was performed and the mechanical properties such as the tensile strength and cryogenic impact strength of the welded part were evaluated.
참고문헌 (11)
- K. Li, "Determinants of ship operators’ options for compliance with IMO 2020", Transportation Research Part D: Transport and Environment, 86, pp.102459(1)~102459(17) (2020)
- 이진성, "An experimental study on fatigue performance of cryogenic metallic materials for IMO type B tank", International Journal of Naval Architecture and Ocean Engineering, 5(4), pp.580~597 (2013), 대한조선학회
- 김영균, "9% 니켈강 후판 용접부의 강도 및 잔류응력", 동력시스템공학회지, 18(4), pp.85~90 (2014), 한국동력기계공학회
- B. Kim, "Effects of the Welding Process and Consumables on the Fracture Behavior of 9 Wt.% Nickel Steel", Experimental Techniques, 44, pp.175~186 (2020)
- 나기범, "9% Ni강의 Alloy 625 용접재료 적용에서 GTAW와 FCAW의 고온균열 발생 특성 비교", 대한용접접합학회지, 37(4), pp.357~362 (2019), 대한용접접합학회[DOI]
- 윤태종, "GBO를 이용한 9% Ni Steel의 필렛 레이저 용접 공정 최적화", 대한용접접합학회지, 38(5), pp.485~492 (2020), 대한용접접합학회[DOI]
- J. Kim, "Experimental Study on Bead on Plate(BOP)Welding of 6 mm Thick 9% Nickel Steel by Fiber Laser Welding", Materials, 14(24), pp.7699~ (2021)
- C. Pyo, "A Study on Welding Deformation in Fiber Laser Welding of 9% Nickel Steel through Finite Element Analysis Part I : Implementation of Welding Heat Source Model", Processes, 9(12), pp.2188~ (2021)
- 김재훈, "LNG 저장탱크용 9% Ni강 용접부의 저온피로균열진전 특성", 대한용접접합학회지, 28(5), pp.45~50 (2010), 대한용접접합학회
- K. Lee, "Status and Prospect of Site Welding Technology for LNG Storage Tank", Journal of the Korean Welding Society, 13(3), pp.8~17 (1995)
- H. Kim, "Investigation of Welding joint-Design and Technique for 9%Ni Steel of LNG Storage Tank", Journal of Welding and Joining, 20(5), pp.29~35 (2002)