선박 극저온 탱크용 고망간강 소재 맞대기 용접부 기계 물성 분석 연구
A Study on Mechanical Properties Analysis of Laser Butt Welds of High Manganese Steel Materials for Vessel Cryogenic Tanks
1
조회
0
다운로드
6
인용
0
참고문헌
키워드
초록
As the International Maritime Organization (IMO)'s environmental regulations on ship emissions become strict, the demand for ships powered by Liquefied Natural Gas (LNG) is rapidly increasing worldwide. Compared to other materials, high manganese steel has the advantages of superior impact toughness at cryogenic temperatures, a small coefficient of thermal expansion, and low cost of base materials and welding rods. However, there is a limitation in that the mechanical properties of the filler material are lower than the base material having excellent mechanical properties. In this study, after performing a high manganese steel laser butt welding experiment, the welding performance was evaluated through mechanical property (yield strength, tensile strength, hardness, cryogenic impact strength) tests of the weld. As a result, it was observed that the yield strength and tensile strength of the high manganese steel laser welding part was 97.5% and 93.5% of the base metal respectively. Also the hardness of welding part was 84.2% of the base metal. The cryogenic impact strength of the welding part and the base metal were over the 27J, the level of welding part is 76.1% of the base metal.
Abstract
As the International Maritime Organization (IMO)'s environmental regulations on ship emissions become strict, the demand for ships powered by Liquefied Natural Gas (LNG) is rapidly increasing worldwide. Compared to other materials, high manganese steel has the advantages of superior impact toughness at cryogenic temperatures, a small coefficient of thermal expansion, and low cost of base materials and welding rods. However, there is a limitation in that the mechanical properties of the filler material are lower than the base material having excellent mechanical properties. In this study, after performing a high manganese steel laser butt welding experiment, the welding performance was evaluated through mechanical property (yield strength, tensile strength, hardness, cryogenic impact strength) tests of the weld. As a result, it was observed that the yield strength and tensile strength of the high manganese steel laser welding part was 97.5% and 93.5% of the base metal respectively. Also the hardness of welding part was 84.2% of the base metal. The cryogenic impact strength of the welding part and the base metal were over the 27J, the level of welding part is 76.1% of the base metal.
참고문헌 (17)
- K. Li, "Determinants of ship operators’ options for compliance with IMO 2020", Transportation Research Part D: Transport and Environment, 86, pp.1~17 (2020)
- Y. Choi, "Prismatic pressure vessel with stiffened-plate structures for fuel storage in LNG-fueled ship", Ocean Eng, 196, pp.1~10 (2020)
- 김보언, "9 wt.% 니켈강 소재를 활용한 선박용 LNG Fuel Tank 초기 설계 및 용접부 성능 평가", 대한용접접합학회지, 37(6), pp.555~563 (2019), 대한용접접합학회[DOI]
- J. Park, "A study on process development of super-TIG welding for 9% nickel steel with Alloy 625", Journal of Manufacturing Processes, 40, pp.140~148 (2019)
- J. Kim, "Laser Welding of ASTM A553-1(9% Nickel Steel)(PART I : Penetration Shape by Bead on Plate)", Metals, 10(4), pp.484~ (2020)
- J. Kim, "Laser Welding of ASTM A553-1(9% Nickel Steel)(PART II : Comparison of Mechanical Properties with FCAW)", Metals, 10(8), pp.999~ (2020)
- M. Tayebi, "Comparative study of AISI 304L to AISI 316L stainless steels joints by TIG and Nd : YAG laser welding", Journal of Alloys and Compounds, 767, pp.112~121 (2018)
- Yang Woosung, "Tensile and Microstructural Behaviors of Austenitic Stainless Steel GTA Welds for Cryogenic Application", 대한용접접합학회지, 38(4), pp.400~408 (2020), 대한용접접합학회[DOI]
- K. Jang, "Welding and environmental test condition effect in weldability and strength of Al alloy", Journal of Materials Processing Technology, 164-165, pp.1038~1045 (2005)
- F. Heirani, "Effects of processing parameters on microstructure and mechanical behaviors of underwater friction stir welding of Al5083 alloy", Journal of Manufacturing Processes, 25, pp.77~84 (2017)
- Fe-36% Ni invar type alloy KLN 36 for LNG Facilities, "K. Nohara", Kawasaki steel, 97~108, pp.technical report, Vol. 13 (1985)
- 한종만, "LNG선 화물격납용기 Invar strake edge 이음부 형상 개선에 관한 연구", 대한용접접합학회지, 27(5), pp.74~80 (2009), 대한용접접합학회
- D. S. Kim, "A Study on Cross-Shaped Structure of Invar Material Using Cold Wire Laser Fillet Welding(PART I : Feasibility Study for Weldability)", Metals, 10(10), pp.1385~ (2020)
- B. Velten., "Investigations on Laser Beam Welding Dissimilar Material Combinations of Austenitic High Manganese(FeMn)and Ferrite Steels", Physics Procedia, 56, pp.610~619 (2014)
- D. Martin, "Weld Metallurgy and Mechanical Properties of High Manganese Ultra-high Strength Steel Dissimilar Welds", Physics Procedia, 83, pp.344~351 (2016)
- I. Han, "Microstructure and Mechanical Properties of Cryogenic High-Manganese Steel Weld Metal", International Journal of Offshore and Polar Engineering, 27(3), pp.348~352 (2013)
- 한일욱, "Ni가 첨가된 고망간 용접봉의 입열량에 따른 인장 특성과 미세조직의 영향", 대한용접접합학회지, 36(1), pp.10~17 (2018), 대한용접접합학회[DOI]