특수합금 사각봉 모넬 소재 압연에 따른베어링 및 축의 안정성 해석
Stability Analysis on Bearing and Shaft in According to Rollingof Rectangular Monel Material with Special Alloy
3
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Hydrogen infrastructure, for instance, such as hydrogen stations, supply chain network, is important in society of hydrogen economy. Special alloy are frequently used to prevent the hydrogen embrittlement in hydrogen vehicles, semiconductor factories and so on. Because special alloy including Monel material has high strength and high hardness, it is known as the hard-to-cut or roll material. This paper aims to investigate the characteristics and safety on bearing and shaft, which consist of key parts of rolling unit, through structural analysis. As the results, it showed that the bearing was weaker than shaft. Further the bearing was safe up to 20.4 ton, which was about 2 times of maximum of roller reaction force in case of considering as static load. However, the bearing was safe up to 10.2 ton in case of considering as repeated load.
Abstract
Hydrogen infrastructure, for instance, such as hydrogen stations, supply chain network, is important in society of hydrogen economy. Special alloy are frequently used to prevent the hydrogen embrittlement in hydrogen vehicles, semiconductor factories and so on. Because special alloy including Monel material has high strength and high hardness, it is known as the hard-to-cut or roll material. This paper aims to investigate the characteristics and safety on bearing and shaft, which consist of key parts of rolling unit, through structural analysis. As the results, it showed that the bearing was weaker than shaft. Further the bearing was safe up to 20.4 ton, which was about 2 times of maximum of roller reaction force in case of considering as static load. However, the bearing was safe up to 10.2 ton in case of considering as repeated load.
참고문헌 (10)
- 박준홍, "돌기 튜브 성형을 위한 회전 금형 인발공정에 관한 연구", 한국기계가공학회지, 17(4), pp.123~129 (2018), 한국기계가공학회[DOI]
- 류현영, "수소자동차 충전소 및 공급망 배치 최적화: 현황 및 연구 제언", 대한산업공학회지, 48(2), pp.211~226 (2022), 대한산업공학회[DOI]
- 송길호, "고강도강의 냉간 조질 압연 시 호일 압연이론을 이용한 압연하중의 예측", 대한기계학회논문집 A, 37(2), pp.271~277 (2013), 대한기계학회
- 최혁, "모넬(Monel)-Clad 파이프의 오버레이 용접 적층수가 용접성에 미치는 영향에 관한 실험적 연구", 한국산학기술학회논문지, 17(11), pp.42~50 (2016), 한국산학기술학회[DOI]
- 이재웅, "밸러스트 흘수 조건에서 5만톤급 석유화학제품 운반선의 엔진 부하에 따른 프로펠러 편심 추력이 축 거동 및 지지베어링에 미치는 영향 연구", 한국마린엔지니어링학회지, 42(1), pp.16~23 (2018), 한국마린엔지니어링학회
- 전상명, "모터링 시동 및 시동정지 사이클에서 경사진 축을 갖는 저어널베어링의 마모 해석 – Part I: 마모발생 가능영역에서의 유막 변화 연구", 한국트라이볼로지학회지, 33(4), pp.153~167 (2017), 한국트라이볼로지학회[DOI]
- 양영준, "특수합금 사각봉 모넬 소재의 탄성영역 인발특성 해석", 한국기계기술학회지, 24(4), pp.605~611 (2022), 한국기계기술학회[DOI]
- 이영식, "인발성형 시스템을 이용한 스테인레스 육각봉의 압연 특성 해석 연구", 한국기계기술학회지, 21(2), pp.234~241 (2019), 한국기계기술학회[DOI]
- 이영식, "특수합금 사각봉 모넬 소재의 인발 소성변형 및 롤러 특성 해석", 한국산업융합학회논문집, 25(6), pp.961~968 (2022), 한국산업융합학회
- S. G. Yeon, "Mechanics of Materials" (2020), Autotech