전동기가 구비된 원형 기둥 외벽의 환기용 천공이 내부 유동 특성에 미치는 영향성
Effect of Ventilation Holes on Internal Flow Characteristics of Cylindrical Column with an Electric Motor
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
In this study, two ventilation holes were considered to prevent condensation in the circular column supporting the provision crane on a training ship(Saenuri) for Mokpo National Maritime University. The ventilation holes could be understood as the most simple and inexpensive way to prevent condensation because it was formed only by drilling. If sufficient ventilation is provided, the insulation and corrosion of an electric motor can be improved, and a comfortable state can be ensured in the circular column. The circular column had an electric motor for driving the provision crane so that the basic principle was to utilize the kinetic energy for the flow field from a cooling fan in the circular column. The ventilation holes attenuated the low-velocity area in the circular column and contributed to internal flow circulation with updrafts. The results were discussed through numerical analysis based on computational fluid dynamics.
Abstract
In this study, two ventilation holes were considered to prevent condensation in the circular column supporting the provision crane on a training ship(Saenuri) for Mokpo National Maritime University. The ventilation holes could be understood as the most simple and inexpensive way to prevent condensation because it was formed only by drilling. If sufficient ventilation is provided, the insulation and corrosion of an electric motor can be improved, and a comfortable state can be ensured in the circular column. The circular column had an electric motor for driving the provision crane so that the basic principle was to utilize the kinetic energy for the flow field from a cooling fan in the circular column. The ventilation holes attenuated the low-velocity area in the circular column and contributed to internal flow circulation with updrafts. The results were discussed through numerical analysis based on computational fluid dynamics.
참고문헌 (17)
- Choi, G. Seok, "Development of Building Technology to Preventing Condensation in Apartment Buildings", Review of Architecture and Building Science, 62(5), pp.36~41 (2018)
- 이채린, "기존 공동주택 붙박이장에서 겨울철 결로 방지를 위한보조난방장치 운전 성능 평가", 한국건축친환경설비학회 논문집, 12(6), pp.567~578 (2018), 한국건축친환경설비학회[DOI]
- 김혜연, "표면 강화 시멘트계 결로방지 단열재의 단열 및 시공성능 분석", 대한건축학회논문집, 38(8), pp.263~268 (2022), 대한건축학회
- 이미연, "공동주택 지하층 공용부위의 단열재 적용에 따른 결로 저감효과 분석에 관한 연구", 대한건축학회논문집, 30(6), pp.255~262 (2014), 대한건축학회[DOI]
- 이민우, "결로방지를 고려한 석재 커튼월 접합부 시공 디테일 연구", 대한건축학회논문집, 22(4), pp.277~284 (2006), 대한건축학회
- 경영혁, "2중 버블시트를 단열재로 시공한 기와지붕의 온도이력 및 에너지 소비량 분석", 대한건축학회연합논문집, 22(3), pp.107~113 (2020), 대한건축학회지회연합회
- 김태명, "이슬 결로점 기반 수배전반 결로 방지 장치 제작", 전기전자학회논문지, 22(3), pp.645~650 (2018), 한국전기전자학회[DOI]
- Lee, H. B, "Characteristics and development direction of covering materials in protected horticulture", Protected Horticulture and Plant Factory, 9(1), pp.53~64 (1996)
- 유인호, "순환팬이 온풍난방 온실의 기상분포 균일화에 미치는 영향", 생물환경조절학회지, 16(4), pp.291~296 (2007), (사) 한국생물환경조절학회
- 유도전동기의 절연물열화특성 분석, "조명.전기설비학회논문지", 2007, 141~149, pp.한국조명.전기설비학회
- 손덕영, "공기청정 시스템 성능예측을 위한 실내 유동현상에 관한 수치모사", 에너지공학, 11(4) (2002), 한국에너지학회
- Han, J. O, "Analysis of Indoor Air-flow with Air Cleaners", Proceedings of Society of Air-Conditioning and Refrigeration Engineering, pp.57~62 (2005)
- 김나용, "디바이더를 장착한 세단 자동차의 리어 디퓨저 주위의 유동해석", 한국기계기술학회지, 23(1), pp.56~63 (2021), 한국기계기술학회[DOI]
- Roffi, M, "Comparison of different cooling fan de signs for electric motors", IEEE International Electric Machines and Drives Conference (IEMDC), pp.1~7 (2017)
- 김치완, "초고층 주거건물에서 굴뚝효과와 외풍영향에 인한 실내 환기 기류해석 및 평가에 관한 연구", 설비공학 논문집, 23(12), pp.828~835 (2011), 대한설비공학회
- 오범석, "차량 창문 개폐에 따른 내부에서의 유동 해석으로의 융합적 고찰", 한국융합학회논문지, 11(2), pp.155~160 (2020), 한국융합학회[DOI]
- 양원모, "스크린설치높이·공기유입량 차이에 따른 벤로형 유리온실 미기상 CFD 유동해석", 생물환경조절학회지, 29(1), pp.52~61 (2020), (사) 한국생물환경조절학회[DOI]