경량화를 위한 전기자동차 로터 샤프트의 구조해석에 관한 연구
A Study on the Structural Analysis of Electric Vehicle Rotor Shaft for Light-Weight
1
조회
0
다운로드
21
인용
0
참고문헌
키워드
초록
A study has been conducted on the structural analysis to reduce the light weight of the electric vehicle rotor shaft. ANSYS Static Structural was used for structural analysis. For weight reduction, the solid shaft was converted into a hollow shaft. The yield strength of the existing material SCM 440 is 655MPa, but to increase its safety, the yield strength is changed to 1,030MPa with SCM822H. At this time, weight reduction of about 47% was achieved. The resonance frequency of the rotor shaft was determined by vibration analysis and the structural safety was analyzed.
Abstract
A study has been conducted on the structural analysis to reduce the light weight of the electric vehicle rotor shaft. ANSYS Static Structural was used for structural analysis. For weight reduction, the solid shaft was converted into a hollow shaft. The yield strength of the existing material SCM 440 is 655MPa, but to increase its safety, the yield strength is changed to 1,030MPa with SCM822H. At this time, weight reduction of about 47% was achieved. The resonance frequency of the rotor shaft was determined by vibration analysis and the structural safety was analyzed.
참고문헌 (10)
- 한정영, "풍력 로터 샤프트 경량화 설계 연구", 한국마린엔지니어링학회지, 38(4), pp.389~395 (2014), 한국마린엔지니어링학회[DOI]
- 이정호, "자동차 휠 축에 대한 형상별 강도 해석 연구", 예술인문사회 융합 멀티미디어 논문지, 5(3), pp.283~290 (2015), 사단법인 인문사회과학기술융합학회[DOI]
- 이주홍, "고속열차용 트리포드 축의 비틀림 해석 및 파단에 대한 실험적 연구", 대한기계학회논문집 A, 40(11), pp.979~986 (2016), 대한기계학회
- ANSYS Inc., "ANSYS Work bench USER Manual, Version 14" (2013)
- 안국찬, "승용차용 템포러리 스틸 휠의 구조적 특성에 관한 연구", 한국기계기술학회지, 15(6), pp.943~948 (2013), 한국기계기술학회[DOI]
- 최복록, "샤시 프레임의 용접부 내구성을 고려한 구조해석", 한국기계기술학회지, 17(4), pp.741~746 (2015), 한국기계기술학회[DOI]
- H. K. Lee, "A Study on Structural Analysis with Change in Design Parameters of Non-Weld Forged Universal Shaft", 2008 Korean Society of Automotive Engineers 30th Anniversary Conference, pp.1330~1335 (2008)
- 홍도관, "Resin Chock 교반기용 임펠러가 달린 축의 진동해석", 대한기계학회논문집 A, 32(11), pp.970~977 (2008), 대한기계학회
- Y. S. Seo1, "Structural and Dynamic Analysis for Structural Stability of Outdoor-type Top-down Evacuation Facilities", 2015 Korean Society of CAD, 2015, ~
- Y. S. Seo, "Dynamic Analysis for Structural Stability of 3kW-Class Vertical Wind Turbine", 2014 Korea CAD, 2014, ~