SUS 육각봉 인발성형용 가변형 롤유닛에 관한 구조해석 연구
Study on Structural Analysis of Variable Roll Unit for Drawing Process of SUS Hexagonal Bar
1
조회
0
다운로드
10
인용
0
참고문헌
키워드
초록
SUS hexagonal bar, which is manufactured by drawing process of SUS circular bar, have been widely used to make various adapters and fittings. The purpose of this study is to investigate the characteristics and stability of variable roll unit including stand module. Stand module is essential part of variable roll unit. Structural analysis was performed to predict the stability of stand module using 3 loads (50, 75, 100 Ton), thus it may be of help to the manufacture of stand module. As the results, internal ring of bearing showed maximum equivalent stress, and moreover bearing, shaft and roller had to be preferentially considered in order to maintain its stability. In cases of 50 and 75 Ton, there were no problems for stabilities, respectively, on the other hand, problem for stability may occur in case of 100 Ton.
Abstract
SUS hexagonal bar, which is manufactured by drawing process of SUS circular bar, have been widely used to make various adapters and fittings. The purpose of this study is to investigate the characteristics and stability of variable roll unit including stand module. Stand module is essential part of variable roll unit. Structural analysis was performed to predict the stability of stand module using 3 loads (50, 75, 100 Ton), thus it may be of help to the manufacture of stand module. As the results, internal ring of bearing showed maximum equivalent stress, and moreover bearing, shaft and roller had to be preferentially considered in order to maintain its stability. In cases of 50 and 75 Ton, there were no problems for stabilities, respectively, on the other hand, problem for stability may occur in case of 100 Ton.
참고문헌 (12)
- 김태걸, "프레스 포밍 공정을 이용한 피팅 파이프 성형 조건 선정", 한국기계가공학회지, 11(1), pp.101~106 (2012), 한국기계가공학회
- 박수현, "초장축 스테인레스", 복합재료 파이프의 피팅 공정 개발, 2008, pp.17(2), 77~82[DOI]
- 허윤영, "필링머신의 롤러 지그 개발에 관한 구조해석", 한국기계기술학회지, 19(2), pp.242~248 (2017), 한국기계기술학회[DOI]
- 허윤영, "필링머신용 SUS 소재의 열전도 해석 연구", 한국기계기술학회지, 19(3), pp.313~319 (2017), 한국기계기술학회[DOI]
- S. K. Lee, "Review on Profile Drawing Process", The Korean Society for Technology of Plasticity, 25(1), pp.67~74 (2016)
- 이상곤, "인발 선재의 잔류응력에 미치는 공정변수의 영향 및 잔류응력 완화", 소성가공, 14(8), pp.704~711 (2005), 한국소성가공학회
- W. S. Kang, "A Study on the Crater Wear of Carbide Tool in Cutting SUS 304", Journal of the Korean Society for Precision Engineering, 8(1), pp.84~95 (1991)
- 박영기, "시험평가법을 이용한 IRB 면진장치 롤러 설계 : Part 2. 소재 열처리", 한국소음진동공학회논문집, 23(4), pp.332~337 (2013), 한국소음진동공학회[DOI]
- 정은교, "롤러 베어링의 동역학 해석을 위한 접촉 모델링 기법의 검증", 한국자동차공학회 논문집, 15(4), pp.115~123 (2007), 한국자동차공학회
- S. G. Yun, "Mechanics of Materials" (2003), Autotech, Book
- D. H. Kim, "Mechanical Maneuvering" (2003), Autotech, Book
- M. J. Lee, "A Study for Cutting Resistance of TiN Coated Tools", Journal of the Korean Society of Machine Tool Engineers, 9(2), pp.87~95 (2000)