특수합금 사각봉 모넬 소재의 탄성영역 인발특성 해석
Analysis on Drawing Characteristics of Monel Materialof Special Alloy with Rectangular Bar in Elastic Limit
0
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
Hydrogen gas is usually used in many industrial facilities, for instance, such as semiconductor, vehicle and gas station. Because hydrogen embrittlement leads to the big damages in bolts, nut, especially, high pressure valves with common materials, therefore, special alloy including Monel material is recommended to reduce the hydrogen embrittlement. The purpose of this study is to investigate the characteristics of Monel within elastic limit through numerical analysis when Monel is drawn by drawing system. As the results, it showed that safety factor was decreased, but deformation and stress was increased, when the number of pass was increased. Furthermore, the method for designating work hardening in numerical simulation was needed to achieve the exact solution in this study.
Abstract
Hydrogen gas is usually used in many industrial facilities, for instance, such as semiconductor, vehicle and gas station. Because hydrogen embrittlement leads to the big damages in bolts, nut, especially, high pressure valves with common materials, therefore, special alloy including Monel material is recommended to reduce the hydrogen embrittlement. The purpose of this study is to investigate the characteristics of Monel within elastic limit through numerical analysis when Monel is drawn by drawing system. As the results, it showed that safety factor was decreased, but deformation and stress was increased, when the number of pass was increased. Furthermore, the method for designating work hardening in numerical simulation was needed to achieve the exact solution in this study.
참고문헌 (7)
- 송길호, "고강도강의 냉간 조질 압연 시 호일 압연이론을 이용한 압연하중의 예측", 대한기계학회논문집 A, 37(2), pp.271~277 (2013), 대한기계학회
- 이영식, "인발성형 시스템 고도화를 위한 특수합금 육각봉의 압연특성 비교 해석 연구", 한국기계가공학회지, 20(5), pp.96~102 (2021), 한국기계가공학회[DOI]
- 최혁, "모넬(Monel)-Clad 파이프의 오버레이 용접 적층수가 용접성에 미치는 영향에 관한 실험적 연구", 한국산학기술학회논문지, 17(11), pp.42~50 (2016), 한국산학기술학회[DOI]
- S. W. Cho, "Microstructure and Hardness of Al-Cu Alloy Coating on Monel 400 by Hot Dipping", Journal of the Korean Institute of Surface Engineering, 29(4), pp.278~285 (1996)
- Y. C. Kim, "A Study on the Corner Filling in the Drawing of Quadrangle Rod from Round Bar", Journal of the Korean Society of Precision Engineering, 17(6), pp.143~152 (2000)
- 김기선, "평판에 충돌하는 사각봉의 소성응력해석", 한국자동차공학회 논문집, 12(5), pp.198~204 (2004), 한국자동차공학회
- 이영식, "인발성형 시스템을 이용한 스테인레스 육각봉의 압연 특성 해석 연구", 한국기계기술학회지, 21(2), pp.234~241 (2019), 한국기계기술학회[DOI]