진동 노즐이 냉매 압축기 EER에 미치는 영향에 관한 수치해석
Numerical Analysis of Effect of Vibrating Nozzles on the EER of a Refrigerant Compressor
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
The compressor of a refrigerator accounts for approximately 60-80% of the total energy consumption necessary for the refrigeration cycle. This study investigates the implementation of a pre-compression system featuring a vibrating nozzle, with the goal of enhancing the efficiency of a linear compressor. By utilizing this pre-compression system, the cooling capacity and efficiency of the compressor are expected to improve. The numerical results show that the pre-compression system leads to an improvement of approximately 1.7% in cooling capacity compared to the baseline model. Furthermore, an increase of approximately 0.1 in EER was observed, confirming the feasibility of incorporating a pre-compression system with a vibrating nozzle.
Abstract
The compressor of a refrigerator accounts for approximately 60-80% of the total energy consumption necessary for the refrigeration cycle. This study investigates the implementation of a pre-compression system featuring a vibrating nozzle, with the goal of enhancing the efficiency of a linear compressor. By utilizing this pre-compression system, the cooling capacity and efficiency of the compressor are expected to improve. The numerical results show that the pre-compression system leads to an improvement of approximately 1.7% in cooling capacity compared to the baseline model. Furthermore, an increase of approximately 0.1 in EER was observed, confirming the feasibility of incorporating a pre-compression system with a vibrating nozzle.
참고문헌 (13)
- H. K. Lee, "Development of the Linear Compressor for a Household Refrigerator", Proceedings International Compressor Engineering Conference, pp.31~38 (2000), Purdue University
- H. Lee, "The Innovative Green Technology for Refrigerators Development of Innovative Linear Compressor", Proceedings International Compressor Engineering Conference (2008), Purdue University
- A. H. P. Antunes, "Experimental Investigation on the Performance and Global Environmental Impact of a Refrigeration System Retrofitted with Alternative Refrigerants", International Journal of Refrigeration, 70, pp.119~127 (2016)
- 김봉석, "스크롤 공기 압축기용 고체윤활 코팅 특성에 관한 연구", 한국기계기술학회지, 16(5), pp.1815~1821 (2014), 한국기계기술학회[DOI]
- J. F. T. MacLaren, "A Review of Simple Mathematical Models of Valves in Reciprocating Compressors", Proceedings International Compressor Engineering Conference, pp.180~187 (1972), Purdue University
- R. Prakash, "Mathematical Modeling and Simulation of Refrigerating Compressors", Proceedings International Compressor Engineering Conference, pp.274~285 (1974), Purdue University
- P. J. Singh, "A Digital Reciprocating Compressor Simulation Program Including Suction and Discharge Piping", Proceedings International Compressor Engineering Conference, pp.129~138 (1984), Purdue University
- M. Dhar, "Compressor Simulation Program with Gas Pulation", Proceedings International Compressor Engineering Conference (1978), Purdue University
- J. K. Kim, "Performance Characteristics of a Capacity-Modulated Linear Compressor for Home Refrigerators", International Journal of Refrigeration, 36, pp.776~785 (2013)
- J. K. Kim, "An Experimental and Numerical Study on an Inherent Capacity Modulated Linear Compressor for Home Refrigerators", International Journal of Refrigeration, 34, pp.1415~1423 (2011)
- I. S. Hwang, "CFD analysis of transient flows in a linear compressor using a 1D-CFD coupled model", International Journal of Refrigeration, 91, pp.20~27 (2018)
- 박상준, "A study on cycle performance variation of a linear compressor considering valve behavior", Journal of Mechanical Science and Technology, 31(9), pp.4481~4488 (2017), 대한기계학회
- C. R. Bradshaw, "A Comprehensive Model of a Miniature-Scale Linear Compressor for Electronics Cooling", International Journal of Refrigeration, 34, pp.63~73 (2011)