리니어 압축기 머플러 형상에 따른 EER 분석
EER Analysis According to the Shape of the Linear Compressor Muffler
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Refrigerators used in homes occupy a large portion of the power consumption. In addition, most of the power consumption of the refrigerator is used by the compressor. Therefore, it is necessary to study on the improvement of compressor efficiency to save energy. In this study, the suction system was changed to improve the efficiency of the linear compressor. For this, numerical analysis was performed by linking the 1 dimensional lumped model and the 2 dimensional axisymmetric CFD model. The numerical analysis results were also compared with the experimental results. As a result of the numerical analysis, the model with modified suction system increased EER by about 0.25% compared to the basic model, which was also confirmed by experiment.
Abstract
Refrigerators used in homes occupy a large portion of the power consumption. In addition, most of the power consumption of the refrigerator is used by the compressor. Therefore, it is necessary to study on the improvement of compressor efficiency to save energy. In this study, the suction system was changed to improve the efficiency of the linear compressor. For this, numerical analysis was performed by linking the 1 dimensional lumped model and the 2 dimensional axisymmetric CFD model. The numerical analysis results were also compared with the experimental results. As a result of the numerical analysis, the model with modified suction system increased EER by about 0.25% compared to the basic model, which was also confirmed by experiment.
참고문헌 (11)
- H. K. Lee, "Development of the linear compressor for a household refrigerator", Proceedings international compressor engineering conference, pp.31~38 (2000), Purdue University
- S. Porkhial, "Transient characteristic of reciprocating compressor in household refrigerators", Applied thermal engineering, 26(14), pp.1725~1729 (2002)
- X. Hou, "Analysis of efficiency and power facor of reciprocating compressor unit under variable frequency and variable conditions", Proceedings international compressor engineering conference (2008), Purdue University
- 안일용, "터보차징을 이용한 리니어 컴프레서의 효율 향상에 관한 CFD 해석", 한국기계기술학회지, 17(1), pp.63~68 (2015), 한국기계기술학회[DOI]
- H. Kim, "An experimental and numerical study on dynamic characteristic of linear compressor in refrigeration system", International journal of refrigeration, 31, pp.1536~1543 (2009)
- P. Binneberg, "Reduction in power consumption of household refrigerators by using variable speed compressor", International refrigeration and air conditioning conference (2002)
- I. S. Hwang, "Linear compressor discharge valve behavior using a rigid body valve model and a FSI valve model", International journal of refrigeration, 82, pp.509~519 (2017)
- H. Bukac, "Understanding valve Dynamics", Proceedings international compressor engineering conference (2002), Purdue University
- 장영남, "냉장고 기계실 냉각팬이 압축기 성능에 미치는 영향", 한국기계기술학회지, 20(1), pp.48~54 (2018), 한국기계기술학회[DOI]
- M. J. Oliverira, "Modeling thermal compressor reciprocal linear operating without oil lube", pp.2014
- "Ansys Fluent version 15", Ansys Inc, ~