진동 노즐이 리니어 압축기의 흡입밸브에 미치는 영향에 관한 수치해석
Numerical Analysis of Effect of Vibrating Nozzle on the Suction Valve of a Linear Compressor
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this study, a vibrating nozzle using the waste vibration energy of the compressor body was installed in the suction flow path to improve the efficiency of the compressor through the pre-compression. To this end, the behavior of the suction valve according to the vibrating nozzle and the mass flow rate of the refrigerant entering the compression chamber were numerically analyzed. The results showed that the mass flow rate increased proportionally as the angle of the vibration nozzle increased. Among the profile shapes of the vibration nozzle, the concave or straight shape showed the highest mass flow rate. Considering the ease of machining, the straight shape is more favorable. On the other hand, as the operating frequency and stroke of the vibration nozzle increased, the mass flow rate also increased proportionally. It can be seen that the largest nozzle angle, operating frequency, and stroke are favorable for pre-compression unless the suction flow is restricted.. In the future, it is necessary to apply the vibrating nozzle system to an actual compressor model to experimentally check the compressor's cooling power, compression work and EER.
Abstract
In this study, a vibrating nozzle using the waste vibration energy of the compressor body was installed in the suction flow path to improve the efficiency of the compressor through the pre-compression. To this end, the behavior of the suction valve according to the vibrating nozzle and the mass flow rate of the refrigerant entering the compression chamber were numerically analyzed. The results showed that the mass flow rate increased proportionally as the angle of the vibration nozzle increased. Among the profile shapes of the vibration nozzle, the concave or straight shape showed the highest mass flow rate. Considering the ease of machining, the straight shape is more favorable. On the other hand, as the operating frequency and stroke of the vibration nozzle increased, the mass flow rate also increased proportionally. It can be seen that the largest nozzle angle, operating frequency, and stroke are favorable for pre-compression unless the suction flow is restricted.. In the future, it is necessary to apply the vibrating nozzle system to an actual compressor model to experimentally check the compressor's cooling power, compression work and EER.
참고문헌 (11)
- H. K. Lee, "Development of the Linear Compressor for a Household Refrigerator", Proceedings International Compressor Engineering Conference, pp.31~38 (2000), Purdue University
- H. Lee, "The Innovative Green Technology for Refrigerators Development of Innovative Linear Compressor", Proceedings International Compressor Engineering Conference (2008), Purdue University
- Z. Zhu, "A numerical model of a linear compressor for household refrigerator", Applied Thermal Engineering, 198 (2021)
- I. S. Hwang, "Linear compressor discharge valve behavior using a rigid body valve model and a FSI valve model", 82, pp.509~519 (2017)
- 황일선, "압축기 바디 진동을 이용한 압축기 내부 고온 냉매 냉각에 대한 연구", 한국기계기술학회지, 23(1), pp.50~55 (2021), 한국기계기술학회[DOI]
- 한상혁, "리니어 압축기 머플러 형상에 따른 EER 분석", 한국기계기술학회지, 22(6), pp.1117~1122 (2020), 한국기계기술학회[DOI]
- 박진규, "진동 노즐을 이용한 리니어 압축기의 예압축 타당성 연구", 한국산학기술학회논문지, 24(5), pp.654~659 (2023), 한국산학기술학회[DOI]
- Menter, "Improved two-equation k-omega turbulence models for aerodynamic flows", No. A-92183, ~ (1992)
- "Ansys Fluent V18", Ansys Inc, ~ (2018)
- 박상준, "A study on cycle performance variation of a linear compressor considering valve behavior", Journal of Mechanical Science and Technology, 31(9), pp.4481~4488 (2017), 대한기계학회
- H. T. Sanergy, "Material data sheet" (2009), Sandvik Materials Technology