중소형버스용 독립현가부품 성형공법 변경을 위한 해석적 연구
Numerical Study for Modification of Forming Method for Independent Suspension Parts for Small and Medium Buses
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Recently, there has been an increasing demand for independent suspension systems in commercial vehicles, and various researches related to this trend are currently underway. In this study, as part of an effort to localize the independent suspension system for commercial vehicles, a preceding study was conducted to convert the existing forging process into a casting process. The structural stability of the developed product was evaluated by performing stress analysis on both forging and casting materials. In order to compensate for the low yield characteristics of the casting material, design improvements were made to lower the maximum stress level based on numerical simulations.Additionally, Lightweight design was performed, capitalizing on the inherent design flexibility offered by casting products. As a result, it was confirmed that the developed product exhibited similar stress characteristics level to the existing product, along with a weight reduction of approximately 5%.
Abstract
Recently, there has been an increasing demand for independent suspension systems in commercial vehicles, and various researches related to this trend are currently underway. In this study, as part of an effort to localize the independent suspension system for commercial vehicles, a preceding study was conducted to convert the existing forging process into a casting process. The structural stability of the developed product was evaluated by performing stress analysis on both forging and casting materials. In order to compensate for the low yield characteristics of the casting material, design improvements were made to lower the maximum stress level based on numerical simulations.Additionally, Lightweight design was performed, capitalizing on the inherent design flexibility offered by casting products. As a result, it was confirmed that the developed product exhibited similar stress characteristics level to the existing product, along with a weight reduction of approximately 5%.
참고문헌 (8)
- J.Y. Jang, "A Development of Independent Suspension Axle System for Special Purpose Vehicle", Proceeding of KSAE fall conference 2008, pp.86~93 (2008)
- T. Mi, "Model Establishment and Parameter Analysis on Shimmy of Electric Vehicle with Independent Suspensions", Procedia IUTAM, 22, pp.259~266 (2017)
- 배복수, "후륜 독립현가방식 차량의 주차변속품질 향상에 대한 분석", 한국자동차공학회 논문집, 25(4), pp.430~439 (2017), 한국자동차공학회[DOI]
- 윤재민, "3자유도 등가 캐빈 현가장치 모델을 이용한 상용차 승차감 성능 최적설계 프로세스 개발", 한국자동차공학회 논문집, 29(6), pp.512~522 (2021), 한국자동차공학회
- 장형배, "다물체 동역학 해석을 통한 맥퍼슨 스트럿 서스펜션 사이드 로드 스프링의 승차감 개선 효과 분석", 대한기계학회논문집 A, 44(8), pp.609~614 (2020), 대한기계학회
- C. H. Lee, "Smooth road shake analysis and design study for improving ride quality", Proceeding of KSAE annual spring conference 2007, pp.764~779 (2007)
- A. Sagin, "Production of austempered ductile iron gears for transmission cases", Materials Testing, 47(9), pp.523~528 (2005)
- Automotive applications of austempered ductile iron (ADI): a critical review, "J. R Keough", SAE, ~ (2000)