LNG 선박 화물창의 플라즈마 자동용접 기술 적용 연구
A Study on the Application of Plasma Automatic Welding Technology for LNG Carrier Cargo Hold
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The demand for LNG Carrier and LNG fuel ships are increasing due to global carbon neutrality declaration and ship emissions regulation of IMO, domestic shipyards pay technology fees(about 5~10% of ship price per vessel) to GTT company in France for making LNG cargo hold. Localization of LNG cargo hold is needed to reduce technology fees and engage technological competitiveness, it is important to secure the critical technology like automation process development of insulation system process. Especially, the automation rate of membrane-type insulation system is very low due to interference caused by corrugation and difficulty in securing optimal variable welding condition. In this study, to solve this problem, automatic welding is performed using developed automatic welding equipment on STS304L steel which is used in flat and corner area of membrane-type LNG cargo hold's lap joint. After welding, Cross-sectional observations and Tensile strength tests were conducted to evaluate reliability of equipment and welding condition. As a result of the test, it was confirmed that the strength of the welded zone exceeded that of base material, and secured the optimal welding condition to apply automatic welding.
Abstract
The demand for LNG Carrier and LNG fuel ships are increasing due to global carbon neutrality declaration and ship emissions regulation of IMO, domestic shipyards pay technology fees(about 5~10% of ship price per vessel) to GTT company in France for making LNG cargo hold. Localization of LNG cargo hold is needed to reduce technology fees and engage technological competitiveness, it is important to secure the critical technology like automation process development of insulation system process. Especially, the automation rate of membrane-type insulation system is very low due to interference caused by corrugation and difficulty in securing optimal variable welding condition. In this study, to solve this problem, automatic welding is performed using developed automatic welding equipment on STS304L steel which is used in flat and corner area of membrane-type LNG cargo hold's lap joint. After welding, Cross-sectional observations and Tensile strength tests were conducted to evaluate reliability of equipment and welding condition. As a result of the test, it was confirmed that the strength of the welded zone exceeded that of base material, and secured the optimal welding condition to apply automatic welding.
참고문헌 (10)
- 정현원, "KC-1 Membrane LNG 탱크 단열시스템의 열해석에 관한 연구", 한국해양공학회지, 31(2), pp.91~102 (2017), 한국해양공학회
- 김영수, "한국형 LNG 화물창 멤브레인의 Sheet 배치 최적화", 대한조선학회 논문집, 59(2), pp.109~117 (2022), 대한조선학회[DOI]
- A. A. Lebedev, "Influence of phase transformations on the mechanical properties of austenitic stainless steelsInfluence of phase transformations on the mechanical properties of austenitic stainless steels", International Journal of Plasticity, (16), pp.749~767 (2000)
- Kim, J. K., "Low Temperature Effects on the Strength and Fracture Toughness of Membrane Material for LNG Storage Tank", Transactions of the Korean Society of Mechanical Engineers, 24(3), pp.710~717 (2000)
- Kim, H. S, "The Evaluation of Mechanical Properties and Fatigue Life for Domestic 304 Stainless Steel Used as Membrane Material in LNG Storage Tank", Transactions of the Korean Society of Mechanical Engineers, 25(10), pp.1644~1650 (2001)
- 나성현, "멤브레인 LNG 저장탱크용 STS304L의 인장 및 피로강도", 한국안전학회지, 31(4), pp.9~14 (2016), 한국안전학회
- 김지선, "레이저 용접조건이 극저온환경용 금속재료의 용접 비드 형상에 미치는 영향에 대한 연구 Part II : STS304L, STS316L", 한국기계기술학회지, 22(4), pp.733~739 (2020), 한국기계기술학회[DOI]
- Kim, J. H, "A Study on the Fatigue Strength of Lap Weld of LNG Tank", Journal of Ocean Engineering and Technology, 13(3-1), pp.29~35 (1999)
- 김경수, "SUS304L 겹침 용접부에 대한 극저온에서의 인장 및 피로강도에 관한 실험적 연구", 한국해양공학회지, 22(3), pp.96~102 (2008), 한국해양공학회
- Moon, "Delta-Ferrite generation factor for austenitic stainless steel weld zone", Journal of Welding and Joining, 5(1), pp.16~22 (1987)