본문 바로가기
KERD
논문KCI 등재

왕복동식 수소압축기의 흡입통로내 작동유체 유동해석

Numerical Analysis on the Working Fluid Flow of Suction-passage for Reciprocating Compressor

2

조회

0

다운로드

0

인용

0

참고문헌

키워드

주제분류기계공학

초록

Numerical analysis information will be very useful to improve fluid system. General information about an internal gas flow is presented by numerical analysis approach. Relating with hydrogen compressing system, which have an important role in hydrogen energy utilization, this should be a useful tool to observe the flow quickly and clearly. Flow characteristic analysis, including pressure and turbulence kinetic energy distribution of hydrogen gas coming to the cylinder of a reciprocating compressor are presented in this paper. Suction-passage model is designed based on real model of hydrogen compressor. Pressure boundary conditions are applied considering the real condition of operating system. The result shows pressure and turbulence kinetic energy are not distributed uniformly along the passage of the Hydrogen system. Path line or particles tracks help to demonstrate flow characteristics inside the passage. The existence of vortices and flow direction can be precisely predicted. Based on this result, the design improvement, such as reducing the varying flow parameters and flow reorientation should be done. Consequently, development of the better hydrogen compressing system will be achieved.

Abstract

Numerical analysis information will be very useful to improve fluid system. General information about an internal gas flow is presented by numerical analysis approach. Relating with hydrogen compressing system, which have an important role in hydrogen energy utilization, this should be a useful tool to observe the flow quickly and clearly. Flow characteristic analysis, including pressure and turbulence kinetic energy distribution of hydrogen gas coming to the cylinder of a reciprocating compressor are presented in this paper. Suction-passage model is designed based on real model of hydrogen compressor. Pressure boundary conditions are applied considering the real condition of operating system. The result shows pressure and turbulence kinetic energy are not distributed uniformly along the passage of the Hydrogen system. Path line or particles tracks help to demonstrate flow characteristics inside the passage. The existence of vortices and flow direction can be precisely predicted. Based on this result, the design improvement, such as reducing the varying flow parameters and flow reorientation should be done. Consequently, development of the better hydrogen compressing system will be achieved.

참고문헌 (14)

  1. A. Midilli, "Key strategies of hydrogen energy systems for sustainability", International Journal of Hydrogen Energy, 32(5), pp.511~524 (2007)
  2. Joan. M. Ogden, "Developing an infrastructure for hydrogen vehicles: a Southern California case study", International Journal of Hydrogen Energy, 24(8), pp.709~730 (1999)
  3. United States Department of Energy, National hydrogen energy roadmap – production, delivery, storage, conversion, application, public education and outreach, , ~ (2002)
  4. J. Ogden, "Hydrogen as a fuel for fuel cell vehicles", Proceedings of the 7th National Hydrogen, Association Meeting, pp.11~13 (1997)
  5. 이안성, "고압 왕복동 압축기의 밸브 거동해석", 한국박용기관학회 2002년 춘계학술대회, pp.107~111 (2002), 한국마린엔지니어링학회
  6. M. Elhaj, "Numerical simulation and experimental study of a two-stage reciprocating compressor for condition monitoring", Mechanical System and Signal Processing, 22, pp.374~389 (2008)
  7. 백승조, "왕복동식 압축기 토출계 내부 유동 해석", 공기조화 냉동공학회 99동계학술발표회, pp.163~167 (1999)
  8. 윤정, "왕복동식 압축기의 경사진 원판형 밸브리드에 대한 압력분포 측정 및 유동해석", 대한기계학회 2003년도 춘계학술대회, pp.1942~1947 (2003)
  9. 박원상, "CFD를 이용한 왕복동압축기 성능해석", 2001 유체기계 연구개발 발표회, pp.441~447 (2001)
  10. Joao. B. Rovaris, "Large Eddy Simulation Applied to Reciprocating Compressors", The Brazilian Society of Mechanical Sciences and Engineering, 28(2) (2006)
  11. Matos. F. F, "Numerical Analysis of the Dynamic Behaviour of Plate Valves in Reciprocating Compressors", International Conference on Compressor and Their Systems, pp.453~462 (1999)
  12. Matos. F. F. S, "Numerical Simulation of Turbulent Flow in Reciprocating Compressors", Proc. of the 2002 Spring School on Transition and Turbulence, pp.10~ (2002)
  13. Matos. F. F. S, "Numerical Analysis of the Dynamic Behavior of Compressor Reed Type Valve", Ph.D., Departamento de Engenharia Mecanica, pp.2002
  14. Matos. F. F, "Numerical Simulation of the Dynamics of Reed Type Valve", Proc. Compressor Engineering Conference at Purdue, pp.8~ (2002)

관련 논문AI추천

이 간행물의 다른 논문 (13건)