승용차량용 챔버시스템 내 공기 유동분포 특성 예측
Numerical Analysis of Air Flow Distribution Characteristics in A Compact Car Chamber System
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Air flow field characteristics in a compact chamber system are indispensable for the efficient development of vehicle aerodynamic performance. In this study, air flow and velocity uniformity in the chamber system were numerically analyzed using the CFD method. Air flows at a uniform velocity from the outlet of the blower, passes fast through the heat exchanger with partial pressure difference, and then moves into the blower inlet. Overall pressure drop through the fan gradually increases with the flow rate. The uniformity varies along the test section, decreasing by 5-10% with distance from the nozzle. These predicted results can be widely used as basic conceptual design data for an efficient vehicle chamber system.
Abstract
Air flow field characteristics in a compact chamber system are indispensable for the efficient development of vehicle aerodynamic performance. In this study, air flow and velocity uniformity in the chamber system were numerically analyzed using the CFD method. Air flows at a uniform velocity from the outlet of the blower, passes fast through the heat exchanger with partial pressure difference, and then moves into the blower inlet. Overall pressure drop through the fan gradually increases with the flow rate. The uniformity varies along the test section, decreasing by 5-10% with distance from the nozzle. These predicted results can be widely used as basic conceptual design data for an efficient vehicle chamber system.
참고문헌 (11)
- Choi, J. S, "History and Types of Wind Tunnels", Journal of The Korean Society of Mechanical Engineers, 51(6), pp.32~36 (2011)
- Um, J. A, "Computational Analysis of Experience Wind Tunnel using Computational Fluid Dynamics", The Wind Engineering institue of korea, 25(2), pp.67~72 (2021)
- Kim, J. K, "Numerical Analysis on the Internal Flow Field Characteristics of Wind Tunnel Contractions with Morel's Equation", Journal of the Korean Society for Power System Engineering, 22(1), pp.11~17 (2018)
- Kong, B. J, "Outlet Total Pressure Variation with Air Flow Rate in a Blower System", Journal of Korean Society of Mechanical Technology, 25(1), pp.1054~1060 (2023)
- Han, S. J, "A Study on the Characteristics of Air flow Fields with Velocity Uniformity in a Wind Tunnel", Journal of the Korean Society of Visualization, 16(3), pp.59~64 (2018)
- Kim, S. H, "Development and Operating Test of the Supersonic Wind Tunnel with 25cm × 20cm Test Section", 2010 KSPE Fall Conference, 717(722), pp.717~722 (2010)
- Byun, Y. H, "Development of Multi-purpose Subsonic Wind Tunnel of Konkuk University", Journal of the Wind Engineering Institute of Korea, 5(1), pp.7~16 (2001)
- Florian. Menter, "Two-Equation Eddy-Viscosity Turbulence Models for Engineering Applications", AIAA Journal, 32, pp.1598~1605 (1994)
- ANSYS Inc, "Spaceclaim User’s Guide", ~ (2023)
- ANSYS Inc, "Mesh User’s Guide", ~ (2023)
- ANSYS Inc, "FLUENT User’s Guide", ~ (2023)