액체수소 저장 탱크 서포트의 열-구조 연성 해석
Thermal-structural coupled analysis of supports for liquid hydrogen storage tank
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Hydrogen is considered as one of the most promising future energy carriers due to its noteworthy advantages of renewable, environmentally friendly and high calorific value. However, the low density of hydrogen makes its storage an urgent technical problem for hydrogen energy development. Compared with the density of gas hydrogen, the density of liquid hydrogen is more than 1.5 times higher. Liquid hydrogen is thus more advantageous for large-scale storage and transportation. However, due to the large difference between the liquid hydrogen temperature and the environment temperature, an inevitable heat leak into the storage tanks of liquid hydrogen occurs, causing boil-off losses and vent of hydrogen gas. Researches on insulation materials for liquid hydrogen are actively being conducted, but research on support design for minimal heat transfer and enhanced rigidity remains insufficient. In this study, to design support for liquid hydrogen storage tank, technique of thermal-structural coupled analysis including geometry, mesh, and boundary condition were developed using Ansys workbench, and equivalent stress and deformation distributions were analyzed.
Abstract
Hydrogen is considered as one of the most promising future energy carriers due to its noteworthy advantages of renewable, environmentally friendly and high calorific value. However, the low density of hydrogen makes its storage an urgent technical problem for hydrogen energy development. Compared with the density of gas hydrogen, the density of liquid hydrogen is more than 1.5 times higher. Liquid hydrogen is thus more advantageous for large-scale storage and transportation. However, due to the large difference between the liquid hydrogen temperature and the environment temperature, an inevitable heat leak into the storage tanks of liquid hydrogen occurs, causing boil-off losses and vent of hydrogen gas. Researches on insulation materials for liquid hydrogen are actively being conducted, but research on support design for minimal heat transfer and enhanced rigidity remains insufficient. In this study, to design support for liquid hydrogen storage tank, technique of thermal-structural coupled analysis including geometry, mesh, and boundary condition were developed using Ansys workbench, and equivalent stress and deformation distributions were analyzed.
참고문헌 (11)
- Gao, Y., "A review of recent developments in hydrogen production via biogas dry reforming", Energy Conversion and Management, 171, pp.133~155 (2018)
- Yu, Y., "Design and Optimization of the Insulation Performance of a 4000m3 Liquid Hydrogen Spherical Tank", Processes, 11(6), pp.1778~ (2023)
- Zheng, J., "Thermodynamic modelling and optimization of self-evaporation vapor cooled shield for liquid hydrogen storage tank", Energy Conversion and Management, 184, pp.74~82 (2019)
- Analytical modeling and test correlation of variable density multilayer insulation for cryogenic storage, "Hastings, L. J.", NASA, ~, pp.Technical Reports, No. M-1109 (2004)
- Kim, J. H., "Thermal-Structural Characteristics of Multi-Layer Vacuum-Insulated Pipe for the Transfer of Cryogenic Liquid Hydrogen", Metals, 12(4), pp.549~ (2022)
- Oh, S. H., "Analysis of the Flow Performance According to the Temperature and Differential Pressure Change of Hydrogen Entering the Receptacle for Hydrogen Charging", Korean Society of Mechanical Technology, 25(5), pp.675~680 (2023)
- Jiang, Y., "CFD simulation of heat transfer and phase change characteristics of the cryogenic liquid hydrogen tank under microgravity conditions", International Journal of Hydrogen Energy, 48(19), pp.7026~7037 (2023), Korean Society of Mechanical Technology
- Kim, N. Y., "Numerical Analysis of Flow Characteristics of Hydrogen Shut-off Valve for Automotive Vehicles", 25(6), pp.1128~1133 (2023)
- Kwak. H. S., "Thermal-Structural Coupled Analysis of Liquid Hydrogen Tank Varying Head Shape", Korean Society of Mechanical Technology, 25(6), pp.999~1004 (2023)
- Kwak. H. S., "Heat Transfer Analysis of Insulation Layer in Liquid Hydrogen Vessel", 25(4), pp.469~474 (2023)
- Zheng, J., "Thermodynamic analysis and comparison of four insulation schemes for liquid hydrogen storage tank", Energy Conversion and Management, 186, pp.526~534 (2019)