굽힘하중을 받고 있는 3가지 선반조립구 이음구조의변형 저항에 관한 수치해석
Numerical Analysis of the Deformation Resistances for 3-Types of Furniture Corner Joints Under Bending Moment
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The design of the corner joints in furniture structures is very important to firmly support the loaded structure and to sufficiently maintain the durability and stability. Therefore, the strength of the corner joints and the rigidity of the connected panels play a very important role in the structural performance of the assembled furniture. The structural properties can be measured or calculated experimentally or numerically, and compared by representing the applyed forces or bending moments as a function of deformed value. This paper shows the numerical models to determine the strength and stiffness of the 3-types of corner joints for simple designed furniture. Based on the finite element results, the maximum stresses are concentrated on the corner joints designed with MDF panels. And the deformation resistances and maximum applied loads are calculated for furniture corner joints under tensile and compressive moment.
Abstract
The design of the corner joints in furniture structures is very important to firmly support the loaded structure and to sufficiently maintain the durability and stability. Therefore, the strength of the corner joints and the rigidity of the connected panels play a very important role in the structural performance of the assembled furniture. The structural properties can be measured or calculated experimentally or numerically, and compared by representing the applyed forces or bending moments as a function of deformed value. This paper shows the numerical models to determine the strength and stiffness of the 3-types of corner joints for simple designed furniture. Based on the finite element results, the maximum stresses are concentrated on the corner joints designed with MDF panels. And the deformation resistances and maximum applied loads are calculated for furniture corner joints under tensile and compressive moment.
참고문헌 (8)
- Jivkov V., "Investigation on ultimate bending strength and stiffness under compression of corner joints from particleboard with connectors for diy furniture", International Scientific Conference Interior and Furniture Design 10th Aniversary Celebration of Engineering Design in Bulgaria Sofia (2005)
- N. Tankut, "Effect of various factors on the rigidity of furniture cases", African Journal of Biotechnology, 8(20), pp.5265~5270 (2009)
- M. Atar, "Determination of diagonal compression and tension performances for case furniture corner joints constructed with wood biscuits", Materials and Design, 30, pp.665~670 (2009)
- H. I. Demirci, "The experimental and finite element analysis of diagonal tensile tests conducted on frame-type constructed corner joints", Technology, 14(1), pp.11~21 (2011)
- Ł. Krzyżaniak, "Strength and stiffness of new designed externally invisible and demountable joints for furniture cases", Engineering Structures, 199(15) (2019)
- M. Podskarbi, "Numerical modelling of new demountable fasteners for frame furniture", Engineering Structures, 185(15), pp.221~229 (2019)
- Altair Engineering, Inc, "Altair Hyperworks 2020", ~ (2020)
- ABAQUS, Inc, "ABAQUS Analysis User's Manual", ~ (2021)