ANSYS를 이용한 실대재의 휨특성에 대한 연구
A Study on the Bending Performance of Structural Size Lumbers Using the ANSYS
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In our country, domestic species can not be used as a structural member because we have not yet grading system. So, to utilize as a basic data of grading system, bending test and numerical modelling on structural member were conducted in this study. 35 of Douglas-fir, 2″ × 6″, span 2.4 m were tested for the bending properties, and Ansys software was used to analyze the numerical modelling on the structural members. The data of knots were inspected and applied in numerical modelling. To obtain the accuracy of analysis, nonlinear numerical analysis was carried out instead of linear numerical analysis. Ultimate load had a wide range from 4883N to 11,738 N, and maximum deformation also had a range from 26 mm to 68 mm. Average of ultimate load was 8,616 N, and that of maximum deformation was 48 mm. The distinctive features of failure types were simple tension type and cross-grain tension type. Ulitmate load and maximum deformation from numerical modelling were 7,504 N and 37 mm. The numerical modelling drawn by this study is available to all species, and reasonable prediction on the bending performance is possible with only some material properties.
Abstract
In our country, domestic species can not be used as a structural member because we have not yet grading system. So, to utilize as a basic data of grading system, bending test and numerical modelling on structural member were conducted in this study. 35 of Douglas-fir, 2″ × 6″, span 2.4 m were tested for the bending properties, and Ansys software was used to analyze the numerical modelling on the structural members. The data of knots were inspected and applied in numerical modelling. To obtain the accuracy of analysis, nonlinear numerical analysis was carried out instead of linear numerical analysis. Ultimate load had a wide range from 4883N to 11,738 N, and maximum deformation also had a range from 26 mm to 68 mm. Average of ultimate load was 8,616 N, and that of maximum deformation was 48 mm. The distinctive features of failure types were simple tension type and cross-grain tension type. Ulitmate load and maximum deformation from numerical modelling were 7,504 N and 37 mm. The numerical modelling drawn by this study is available to all species, and reasonable prediction on the bending performance is possible with only some material properties.
참고문헌 (9)
- 김광철, "옹이 형태별 소재의 압축강도 예측에 관한 연구", 목재공학, 38(3), pp.170~177 (2010), 한국목재공학회
- 김광철, "수치해석법을 활용한 압축부재 성능 해석의 가능성에 대한 연구", 한국가구학회지, 21(1), pp.26~39 (2010), 한국가구학회
- 김광철, "백합나무 스킨팀버의 압축 성능에 관한 연구", 목재공학, 39(4), pp.333~343 (2011), 한국목재공학회
- 김광철, "수치해석법을 활용한 실대재의 휨특성에 대한 연구", 한국목재공학회 학술발표 (2011)
- 김광철, "유한요소법을 적용한 전통 접합부의 휨특성에 대한 연구", 한국목재공학회 학술발표 (2011)
- 김광철, "A Study on the 2D Thermal Analysis of Wood Frame System and Concrete-Brick Frame System", 제2회 공업화 목조건축 국제심포지엄, pp.197~202 (2011), 국립산림과학원
- ASTM D 143, "Standard test methods for smallclear specimens of timer", ~ (2007)
- Kim, G. C, "Numerical analysis of compressive performance for the korean traditional joints", 제61회 일본목재학회대회 (2011)
- FPL, "Wiidgabdbook", ~ (1999)