높이조절 테이블의 하중에 따른 구조해석
Structural Analysis according to Load of Height-adjustable Table
2
조회
0
다운로드
9
인용
0
참고문헌
키워드
초록
In this study, the structural analysis was performed by using Solidworks program to investigate the stress and displacement characteristics of upper desk and table arm depending on the types and positions of load applied to the height-adjustable table(Cases 1, 2, 3, 4). The simulation was used to model the table and create the mesh for computational analysis. The height-adjustable table consists of three parts, upper desk, table arm and support body. Case 3 with the side concentrated load showed the maximum stress and maximum displacement at table arm and upper desk. From the stress and displacement characteristics of the upper desk and table arm, the stresses at the bending part of table arm and the deflection at the front part of upper desk were the greatest.
Abstract
In this study, the structural analysis was performed by using Solidworks program to investigate the stress and displacement characteristics of upper desk and table arm depending on the types and positions of load applied to the height-adjustable table(Cases 1, 2, 3, 4). The simulation was used to model the table and create the mesh for computational analysis. The height-adjustable table consists of three parts, upper desk, table arm and support body. Case 3 with the side concentrated load showed the maximum stress and maximum displacement at table arm and upper desk. From the stress and displacement characteristics of the upper desk and table arm, the stresses at the bending part of table arm and the deflection at the front part of upper desk were the greatest.
참고문헌 (7)
- 이종선, "LCD 모니터의 구조해석", 한국산학기술학회논문지, 14(9), pp.4191~4196 (2013), 한국산학기술학회[DOI]
- D. Y. Kim, "A Study on the Structure Design for the Desk Chair of the Folding Desk type in the Lecture", Korea Academy Industrial Cooperation Society, pp.430~432 (2008)
- J. H. Lee, "Mechanical Analysis for Optimal Design of Material Table", Korean Society of Precision Engineering, pp.247~248 (2016)
- C. l. Baek, "The Mechanism Design to Keep Balance of a Seat Back Table in the Car", Korea Academy Industrial Cooperation Society, pp.143~144 (2014)
- 이병호, "경량화를 위한 전기자동차 로터 샤프트의 구조해석에 관한 연구", 한국기계기술학회지, 20(2), pp.154~159 (2018), 한국기계기술학회[DOI]
- 차재민, "자동압착기의 형상변화에 따른 구조와 피로해석 연구", 한국기계기술학회지, 19(2), pp.156~161 (2017), 한국기계기술학회[DOI]
- Dassault Systems Solidworks Co., "Solidworks Simulation Manual" (2016)