Optimization of fiber length and filler content for improving the mechanical behaviour of musa acuminate fiber-reinforced epoxy composite using response surface methodology
0
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
In recent years, it is crucial to describe and enhance the natural fiber’s strength qualities as well as look for new opportunitiesto use them in composite materials. The technical characteristics of a novel series of Al2O3 and Boiled eggshell fillers addedpolymer composite using Banana fiber as a strengthening material in an Epoxy polymer matrix have been studied in thiscurrent experiment. Composites were created and evaluated for varying fiber lengths (100, 150, and 200 mm) and weightpercentages of fillers (5, 10, and 15%). 9 samples were prepared and the tensile (TES), flexural (FLS), and impact strength(IMS) of the composites were measured. The numerical formulas were developed for the tensile strength, flexural strength, andimpact strength with the investigated process factors using the Design Expert 13 statistical software output coefficients. Optimization was carried out using response surface methodology and the ultimate ideal parameters for maximum tensilestrength, impact strength, and flexural strength were discovered as a fiber length of 200 mm and filler content of 11.74%. Finaloptimum values were found the tensile strength of 14.25 MPa, the impact strength of 37.71 kJm-2, and the flexural strengthof 36.069 MPa. It is observed that the impact of Al2O3 and boiled eggshell filling materials in the improvement of mechanicalproperties are very enormous.
Abstract
In recent years, it is crucial to describe and enhance the natural fiber’s strength qualities as well as look for new opportunitiesto use them in composite materials. The technical characteristics of a novel series of Al2O3 and Boiled eggshell fillers addedpolymer composite using Banana fiber as a strengthening material in an Epoxy polymer matrix have been studied in thiscurrent experiment. Composites were created and evaluated for varying fiber lengths (100, 150, and 200 mm) and weightpercentages of fillers (5, 10, and 15%). 9 samples were prepared and the tensile (TES), flexural (FLS), and impact strength(IMS) of the composites were measured. The numerical formulas were developed for the tensile strength, flexural strength, andimpact strength with the investigated process factors using the Design Expert 13 statistical software output coefficients. Optimization was carried out using response surface methodology and the ultimate ideal parameters for maximum tensilestrength, impact strength, and flexural strength were discovered as a fiber length of 200 mm and filler content of 11.74%. Finaloptimum values were found the tensile strength of 14.25 MPa, the impact strength of 37.71 kJm-2, and the flexural strengthof 36.069 MPa. It is observed that the impact of Al2O3 and boiled eggshell filling materials in the improvement of mechanicalproperties are very enormous.
참고문헌 (42)
- A. Gholampour, , J. Mater. Sci, 55(3), pp.829~892 (2020)
- K.R. Sumesh, , J. Ind. Text, 51(4), pp.6705S~6727S (2022)
- N. Venkateshwaran, , J. Reinf. Plast. Compos, 29(15), pp.2387~2396 (2010)
- S. S. Kumar, , Biomass. Conv. Bioref (2023)
- S. S. Murthy, , Proc. Inst. Mech. Eng. Pt. L J. Mater. Des. Appl, 226(1), pp.52~60 (2012)
- V. V. Rajan, , IOP Conf. Ser. Mater. Sci. Eng, 988(1), pp.012046~ (2020)
- G. Ramesh, , Polym. Compos, 41(11), pp.4899~4906 (2020)
- L. Naidu, , Int. J. En, 31(4), pp.659~665 (2018)
- S. A. Kumar, , Mater. Today. Proc, 45(1), pp.6149~6153 (2021)
- M. Z. Hassan, , J. Mater. Res. Technol, 8(4), pp.3517~3528 (2019)
- K.R. Sumesh, , J. Ind. Text, 51(3), pp.4441S~4459S (2022)
- M. S. Hossain, , Nano. Hybrid. Compos, 29(1), pp.84~92 (2020)
- A. Stalin, , J. Ind. Text, 51(4), pp.5869S~5886S (2022)
- I. Iliyasu, , Sci. Afr, 16, pp.e01269~ (2022)
- A. G. Adeniyi, , Mech. Adv. Mater. Struct, 28(18), pp.869~1877 (2021)
- M. V. V. Muralikrishna, , Mater. Today. Proc, 22(1), pp.541~545 (2020)
- S. Kumar, , Mater Today. Proc, 46, pp.2471~2476 (2021)
- R. Kumar, , Int. J. Interact. Des. Manuf (2023)
- V. S. Jagadale, , Int. J. Eng. Innov. Technol, 8, pp.3006~3011 (2019)
- K. Begum, , J. Sci. Res, 7(3), pp.97~111 (2015)
- Krishnudu, , AIP. Conf. Proc, 1952(1), pp.020058~ (2018)
- V. Vinoth, , Int. J. Mater. Eng. Innov, 13(3), pp.208~221 (2022)
- S. Jayabal, , Cellulose, 28(35), pp.31~33 (2016)
- M. Sutharsan, , In. Rect. Adv. in. Mater. Mod. Manuf, pp.533~542 (2022)
- V. S. S. Sundaram, , J. Nanomater (2022)
- S. S. Murthy, , Ind. J. Fiber. Text. Res, 38(1), pp.81~86 (2013)
- S. R. Muneeswaran, , Mater Today. Proc, 33(1), pp.4790~4792 (2020)
- Hai Vu Pham, "Self-healing and mechanical properties of reinforced nickel-dispersed alumina hybrid nanocomposites", Journal of Ceramic Processing Research, 16(5), pp.468~471 (2015), 청정에너지연구소[DOI]
- A. Srinivasan, "Investigation and optimization on micro and nano Al2O3 reinforced aluminium composites using GRA coupled PCA technique", Journal of Ceramic Processing Research, 23(6), pp.783~793 (2022), 청정에너지연구소[DOI]
- S. S. Kumar, , Int. J. Veh. Struct, 14(3) (2020)
- Kamrun Nahar Fatema, "The effect of ceramic fiber on the rheological and mechanical properties of porous Al2O3 ceramics", Journal of Ceramic Processing Research, 24(1), pp.197~204 (2023), 청정에너지연구소[DOI]
- M. Shanmugam, , Mater. Today. Proc, 37(1), pp.1943~1956 (2021)
- Muhammad Shahid, "Synthesis and mechanical characterization of alumina based composite material for armor application", Journal of Ceramic Processing Research, 22(2), pp.149~157 (2021), 청정에너지연구소[DOI]
- S. S. Kumar, , Mater. Today. Proc, 37(1), pp.1963~1972 (2021)
- Hyun Woo Choi, "Effects of Al2O3 addition on nanocrystal formation and crystallization kinetics in (1-x)Li2B4O7-xAl2O3 glasses", Journal of Ceramic Processing Research, 20(1), pp.63~68 (2019), 청정에너지연구소[DOI]
- P. Gopi Krishnan, "Optimization of process parameters in friction stir welding of aluminium matrix SiC-Al2O3 composites by genetic algorithm", Journal of Ceramic Processing Research, 21(2), pp.157~163 (2020), 청정에너지연구소[DOI]
- Sazia Sultana, "Effect of the ratio of eggshell and rice husk as starting materials on the direct synthesis of bioactive wollastonite by solid state thermal method", Journal of Ceramic Processing Research, 21(3), pp.285~295 (2020), 청정에너지연구소[DOI]
- V. D. Kumar, , In. Rect. Adv. in. Mater. Mod. Manuf, pp.379~388 (2022)
- Maryam Abolfazli, "Preparation and characterization of Alumina", Magnesia, Graphite refractory composites using response surface methodology, pp.Journal of Ceramic Processing Research, 2022[DOI]
- Dagyeong Lee, "Effect of MgO-CaO-Al2O3-SiO2 glass additive on densification of Al2O3 ceramics", Journal of Ceramic Processing Research, 23(2), pp.149~153 (2022), 청정에너지연구소[DOI]
- S. Sridhar, "Microstructural analysis and experimental investigation of mechanical properties of epoxy based hybrid composite reinforced with flax, sisal and luffa fibre", Journal of Ceramic Processing Research, 23(4), pp.498~502 (2022), 청정에너지연구소[DOI]
- Senthilkumar K.M, "Experimental investigation and optimization of machining parameters during machining of glass fibre reinforced epoxy based composite using desirability function analysis", Journal of Ceramic Processing Research, 23(4), pp.541~545 (2022), 청정에너지연구소[DOI]