PET/CT 팬텀의 3D 프린팅 소재 적용 가능성 평가
Evaluation of the Applicability of PET/CT Phantom as a 3D Printing Material
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
The purpose of this study is to present objective information in applying 3D printing technology for PET/CT (Positron Emission Tomography/Computed Tomography) performance evaluation and use it as a basic research that can be applied to various purposes in the future. Phantoms were manufactured with step wedge of ABS(Acrylonitrile Butadiene Styrene) and ACR(Acrylic acid) material. The counts for each ROI(Region of Interest) were analyzed through image acquisition in PET/CT. And the variation rate of counts and CNR(Contrast Noise Ratio) was evaluated. In the counts analysis, the effect of thickness occurred. In addition, in the variation rate analysis, the thickness setting of steps wedge 4 to 5 levels should be considered first. These results minimize quantitative and qualitative changes in the phantom manufactured based on 3D printing, and enable more stable PET/CT performance evaluation. Based on 3D printing in PET/CT, various phantoms are expected to be produced in the future. If the characteristics of each material are considered and applied through the basic research such as this research, the result of the phantom manufactured through 3D printing can be more meaningful and will be used in a wide range.
Abstract
The purpose of this study is to present objective information in applying 3D printing technology for PET/CT (Positron Emission Tomography/Computed Tomography) performance evaluation and use it as a basic research that can be applied to various purposes in the future. Phantoms were manufactured with step wedge of ABS(Acrylonitrile Butadiene Styrene) and ACR(Acrylic acid) material. The counts for each ROI(Region of Interest) were analyzed through image acquisition in PET/CT. And the variation rate of counts and CNR(Contrast Noise Ratio) was evaluated. In the counts analysis, the effect of thickness occurred. In addition, in the variation rate analysis, the thickness setting of steps wedge 4 to 5 levels should be considered first. These results minimize quantitative and qualitative changes in the phantom manufactured based on 3D printing, and enable more stable PET/CT performance evaluation. Based on 3D printing in PET/CT, various phantoms are expected to be produced in the future. If the characteristics of each material are considered and applied through the basic research such as this research, the result of the phantom manufactured through 3D printing can be more meaningful and will be used in a wide range.
참고문헌 (15)
- Christian C, "Applications of positron emission tomography", computed tomography image fusion in clinical positron emission tomographyclinical use, interpretation methods, diagnostic improvements, 2003, pp.33(3), 228~237
- 오정수, "Nuclear Medicine Physics: Review of Advanced Technology", 의학물리, 31(3), pp.81~98 (2020), 한국의학물리학회[DOI]
- Lee JS, "Recent advances in hybrid molecular imaging systems", Semin Musculoskelet Radiol, 18(02), pp.103~122 (2014)
- Lee BI, "Quality Assurance and Performance Evaluation of PET", CT, 2008, pp.42(2), 137~144
- 박훈희, "3D 프린팅 팬텀의 섬광카메라 적용 평가", 방사선기술과학, 44(4), pp.343~350 (2021), 대한방사선과학회
- 박훈희, "3D 프린팅 기법 기반의 Hoffman Brain 팬텀 개발 및 유용성 평가", 방사선기술과학, 42(6), pp.441~446 (2019), 대한방사선과학회
- Zein I, "Fused Deposition Modeling of Novel Scaffold Architectures for Tissue Engineering Applications", Biomaterials, 23(4), pp.1169~1185 (2022)
- Yoo JJ, "Koonja Publishing Inc", pp.293~508 (2010), Koonja Publishing Inc
- Mannoor MS, "3D Printed Bionic Ears", Nano Lett, 13(6), pp.2634~2639 (2013)
- 박석희, "3D프린팅 활용 생체의료분야 기술동향", 한국정밀공학회지, 31(12), pp.1067~1076 (2014), 한국정밀공학회
- 이상욱, "3D 프린팅 기술의 의료적용에 관한 종설", 대한영상의학회지, 80(2), pp.213~225 (2019), 대한영상의학회[DOI]
- 김현창, "3D프린팅이 사회․경제에 미치는 영향에 관한 연구", 디지털융복합연구, 13(7), pp.23~31 (2015), 한국디지털정책학회[DOI]
- Gear JI, "Development of patient-specific molecular imaging phantoms using a 3D printer", Nuclear Medicine Physics, 41(8), pp.082502~ (2014)
- Qiu J, "Constructing Customized Multimodal Phantoms Through 3D Printing : A Preliminary Evaluation", Front Phys, 9, pp.605630~ (2021)
- Ivo R, "Performance Evaluation of the Vereos PET", CT System According to the NEMA NU2-2012 Standard, 2019, pp.60(4), 561~567