무전도 금속 증착을 위한 하전 입자빔 전처리 공정의 타당성 연구
On Feasibility Study of the Charged Particle Beam Pretreatment Process for Non-conducting Metal Coating
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Purpose: Since several problems were found when present non-conducting metal coating process was appliedto mass production, we study and develop to improve those problems. Methods: In this paper, a couple of analysis methods such as surface hardness, XPS spectrum analysis, morphology,and reflection ratio were used. Results: This paper suggest a new possibility of Non-conducting thin metal coating method that has qualityof mass production phase without UV coating process. Conclusion: By the result of analysis, we can set optimized process conditions of the electro deposition coatingusing electron beam.
Abstract
Purpose: Since several problems were found when present non-conducting metal coating process was appliedto mass production, we study and develop to improve those problems. Methods: In this paper, a couple of analysis methods such as surface hardness, XPS spectrum analysis, morphology,and reflection ratio were used. Results: This paper suggest a new possibility of Non-conducting thin metal coating method that has qualityof mass production phase without UV coating process. Conclusion: By the result of analysis, we can set optimized process conditions of the electro deposition coatingusing electron beam.
참고문헌 (11)
- Azuma, H., "Coating on Plastics Treated by Laser Ablation without Primer", R&D Review of Toyota CRDL, 40(2), pp.50~ (2005)
- Azuma, H., "New Surface Treatment of Polymers by Simultaneous Exposure to Vacuum Ultra-Violet Light and Nanometric-Sized Particles", Jpn. J. Appl. Phys, 43(10), pp.1250~ (2008)
- Charbonnier, M., "New approaches for electroless plating processes by activation of polymer surface using low pressure plasma and dielectric-barrier discharge devices", The 7th Symposium on Metallized Plastics: Fundamental and Applied Aspects (1999)
- Fracassi, F., "Surface modification of polymers and metals with low temperature plasma", The 3rd Mikkeli International Industrial Coating Seminar (2006)
- 강해운, "순환주기나 빈번한 작은 이동이 발생하는 공정관리를 위한 Z-CUSUM 관리도", 품질경영학회지, 32(2), pp.132~153 (2004), 한국품질경영학회
- 김정훈, "지역적이고 비정규분포를 갖는 데이터의 공정관리를 위한 지역기반 T2관리도", 품질경영학회지, 40(3), pp.337~346 (2012), 한국품질경영학회[DOI]
- Matthée, T., "Metallization of polymers by plasma pretreatment followed by an electroplating process", The 7th Symposium on Metallized Plastics: Fundamental and Applied Aspects (1999)
- Skelly, J, "Metallization of Plastics", Techinical Review
- Shimshock , P., "Optical Coatings on Plasics", The 3rd Mikkeli International Industrial Coating Seminar (2006)
- Skelly, J., "Decorative Plating Processes for Common Plastic Resins" (2008), Metalfinishing
- Subramanyam, T, "Non-conductive Radio Frequency Transparent Metallic Looking Coatings", The 3rd Mikkeli International Industrial Coating Seminar (2006)