플라스틱 도금 기술에 대한 이해와 동향

키워드

참고문헌 (35)

1. R. Xiao, "Thermodynamic properties of aggerate coated by different types of waste plastic: adhesion and moisture resistance of asphalt aggregate systems", Journal of Materials in Civil Engineering, 35 (2023)
2. R. Suman, "Experimental study of electroless plating on acrylonitrile butadiene styrene polymer for obtaining new eco-friendly chromiumfree processes", Materials Today:Proceedings, 28, pp.1575~1579 (2020)
3. D. Akhouri, "A review report on the plating process of fused deposition modelling(FDM) built parts", Materials Today : Proceedings, 26, pp.2140~2142 (2020)
4. R. Tao, "Contributions of chemical interactions and mechanical interlocking for the adhesion of electroplated copper to ABS in the Cr(VI)etching process", International Journal of Adhesion and Adhesives, 126, pp.103450~ (2023)
5. R. Ta o, "Characterizing ABS-copper chemistry-dependent adhesion : from the atomic to macro level", Journal of Materials Research and Technology, 29, pp.4384~4393 (2024)
6. L. A. C. Teixeira, "Surface conditioning of ABS for metallization without the use of chromium baths", Journal of Materials Processing Technology, 170, pp.37~41 (2005)
7. A. Yudhanto, "Identifying adhesion characteristics of metalpolymer interfaces : recent advances in the case of electroplated acrylonitrile butadiene styrene", Materials Today : Communications, 35, pp.106218~ (2023)
8. R. Melentiev, "Towards decoupling chemical and mechanical adhesion at the electroplated metal", polymer interface via precision surface texturing, 2023, pp.38, 102875~
9. A. Trivedi, "Investigation on electroless metallized fused filament fabricated ABS parts", Materials and Manufacturing Processes, 38, pp.960~970 (2023)
10. A. Santis, "Optimizing Cr(VI) reduction in plastic chromium plating wastewater: particle size, irradiation, titanium dose", Emerging Science Journal, 8, pp.17~27 (2024)
11. S. Prasad, "Chromium contamination and effect on environmental health and its remediation : a sustainable approach", Journal of Environmental Management, 285, pp.112174~ (2021)
12. P. Sun, "Conductive polyaniline film synthesized through in-situ polymerization as a conductive seed layer for hole metallization of printed circuit boards", Applied Surface Science, 665, pp.159649~ (2024)
13. R. Melentiev, "Mapping the coating failure modes of electroless plated metal on ABS polymer with micro-nano structured interface", International Journal of Adhesion and Adhesives, 126, pp.103471~ (2023)
14. V. Vitry, "Recent advances in electroless nickel-boron coatings", Surface and Coatings Technology, 428, pp.127937~ (2022)
15. C. J. C. Nocheseda, "Copper-nickel electroplating of 3D-printed acrylonitrile butadiene styrene for interference and radiation shielding applications", Materials Chemistry and Physics, 308, pp.128193~ (2023)
16. D. Xie, "Effect of electrodeposited Cuinter layer thickness on characterizations and adhesion force of Ni", Cu, International Journal of Adhesion and Adhesives, pp.2024, 129[DOI]
17. R. Melentiev, "Effect of actual surface area on adhesion strength of copper electroplated on ABS plastic micro-textured by hot embossing", Procedia CIRP, 108, pp.210~215 (2022)
18. M. Bazzaoui, "Environmentally friendly process for nickel electroplating of ABS", Applied Surface Science, 258, pp.7968~7975 (2012)
19. R. Melentiev, "Greener electrochemical plating of ABS polymer with unprecedented adhesion via hierarchical micro–nanotexturing", Journal of Materials Research and Technology, 24, pp.3575~3587 (2023)
20. W. Yuan, "Efficient recycling of surface-plated metals from ABS plastic waste via ammonium persulfate system", Separation and Purification Technology, 326, pp.124796~ (2023)
21. J. Wang, "Sequential recovery of Cu(II), Cr(III), and Zn(II) from electroplating sludge leaching solution by an online biosorption method with dosage controlling", Journal of Cleaner Production, 337, pp.130427~ (2022)
22. S. Ghosh, "Electrolesscopper deposition: a critical review", Thin Solid Films, 669, pp.641~658 (2019)
23. N. Lazarus, "Direct electroless plating of conductive thermoplastics for selective metallization of 3D printed parts", Additive Manufacturing, 55, pp.102793~ (2022)
24. M. Kumar, "Precision finishing of nickel-phosphorus plated carbon fibre reinforced polymer", Surface Engineering, pp.310~319 (2024)
25. M. Kumar, "Improving surface finish and wear resistance of electroless nickel plating using flexible abrasive tool", Wear, 546-547, pp.205326~ (2024)
26. R. K. Alhamad, "Improved acrylonitrile-butadiene-styrene surface properties via electroless(NiP-SiC)nanocomposite coating", Chemical Physics Impact, 7, pp.100375~ (2023)
27. R. Akay, "Chromium coating of wollastonite filled polyamide 6and evaluation of thermal cycle strength", Journal of The Turkish Chemical Society Section B: Chemical Engineering, 6, pp.107~122 (2023)
28. M.J. Choi, "Development of paint-free metallic plastic material for automotive parts", Korean Chemical Engineering Research, 60, pp.295~299 (2022)
29. H. Krupova, "Experimental evaluation of selectively laser sintered polyamide 12 surface treatment for direct electrodeposition", Progress in Organic Coatings, 186, pp.107968~ (2024)
30. P. R. Wang, "Laser-activated selective electroless plating on 3D structures via additive manufacturing for customized electronics", Advanced Materials Technologies, 8, pp.2300516~ (2023)
31. N. Shahrubudin, "An overview on 3D printing technology: technological, materials, and applications", 2nd International Conference on Sustainable Materials Processing and Manufacturing, 35, pp.1286~1296 (2019)
32. A. T. K. Perera, "Recent progress in functionalized plastic 3D printing in creation of metallized architectures", Materials and Design, 232, pp.112044~ (2023)
33. C. Essbach, "Challenges in electroplating of additive manufactured ABS plastics", Journal of Manufacturing Processes, 68, pp.1378~1386 (2021)
34. K.W. Song, "New metal-plastic hybrid additive manufacturing for precise fabrication of arbitrary metal patterns on external and even internal surfaces of 3D plastic structures", ACS Applied Materials and Interfaces (2022)
35. R. Melentiev, "Multiprocess additive manufacturing via fused deposition modeling, chemical deposition, and electroplating with tough interfacial adhesion", Smart Materials in Manufacturing, pp.100043~ (2024)

관련 논문AI추천