Titanium Aluminium Nitride 후막의 전자-빔 조사 효과
Effect of Electron Irradiation on the Titanium Aluminium Nitride Thick Films
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Electron beam irradiation is widely used as a type of surface modification technology to advance surface properties. In this study, the effect of electron beam irradiation on properties, such as surface hardness, wear resistance, roughness, and critical load of Titanium Aluminium nitride (TiAlN) films was investigated. TiAlN films were deposited on the SKD-61 substrate by using cathode arc ion plating. After deposition, the films were bombarded with intense electron beam for 10 minutes. The surface hardness was increased up to 4520 HV at electron irradiation energy of 1500 eV. In addition, surface root mean square (RMS) roughness of the films irradiated at 1500 eV shows the lowest roughness of 484 nm in this study.
Abstract
Electron beam irradiation is widely used as a type of surface modification technology to advance surface properties. In this study, the effect of electron beam irradiation on properties, such as surface hardness, wear resistance, roughness, and critical load of Titanium Aluminium nitride (TiAlN) films was investigated. TiAlN films were deposited on the SKD-61 substrate by using cathode arc ion plating. After deposition, the films were bombarded with intense electron beam for 10 minutes. The surface hardness was increased up to 4520 HV at electron irradiation energy of 1500 eV. In addition, surface root mean square (RMS) roughness of the films irradiated at 1500 eV shows the lowest roughness of 484 nm in this study.
참고문헌 (11)
- H. Ju, , Surf. Coat. Technol, 317, pp.158~165 (2017)
- T. Morita, , Mater. Sci. Eng. A, 661, pp.105~114 (2016)
- H. Ju, , Appl. Surf. Sci, 355, pp.878~883 (2015)
- R. Lan, , Diam. Relat. Mater., 98, pp.107473~ (2019)
- 김유성, "Electron Irradiation Effects on the Optical and Electrical Properties of ZnO", Ag, 대한금속·재료학회지, pp.2020, 58(3)[DOI]
- T. A. Krylova, , Mater. Lett, 274, pp.128022~ (2020)
- Y. S. Kim, , Coatings, 10, pp.604~ (2020)
- 박인욱, "하이브리드 증착 시스템에 의해 합성된나노복합체 Ti-Al-Si-N 박막의 미세구조와 기계적 특성", 한국표면공학회지, 36(2) (2003), 한국표면공학회
- 엄태영, "전자빔 조사에 따른 CrAlN", SKD61의 표면경도 및 내마모도 개선효과, 2017, pp.30(4), 164~168[DOI]
- 신창호, "전자-빔 조사를 이용한 TiN 박막의 물성변화에 관한 연구", 열처리공학회지, 23(1), pp.29~33 (2010), 한국열처리공학회
- W. Jiang, , Nucl. Instrum. Method Phys. Res. B, 436, pp.63~67 (2018)