궤도차량 변속오류 예방을 위한 품질개선
Quality Improvement to Prevent Shifting Error of Tracked Vehicles
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Purpose: The purpose of this study is to investigate the causes of shifting errors reported in military tracked vehicles and to improve related quality to prevent recurrence. Methods: A systematic disassembly and inspection of the transmission is carried out and an experimental simulation is conducted to reproduce the shifting error phenomenon. Electrical characteristic tests are subsequently performed and microscopic observation is also carried out on the disassembled connector parts such as pins and fractured surfaces. Results: Oil contamination and swelling deformation are observed in the connector to the vehicle due to oil leakage of its counterpart connector to the transmission. This causes electrical contact failure between both connectors in the fastened state, and it is found that shifting error of the tracked vehicle could occur subsequently. To prevent the recurrence of this phenomenon, comprehensive quality improvement is conducted including product improvement of the wiring harness assembly and strengthening activities for quality control and preventive maintenance. Conclusion: This study is expected to be helpful as a prior case study for cause analysis and recurrence prevention in the event of similar cases in the future.
Abstract
Purpose: The purpose of this study is to investigate the causes of shifting errors reported in military tracked vehicles and to improve related quality to prevent recurrence. Methods: A systematic disassembly and inspection of the transmission is carried out and an experimental simulation is conducted to reproduce the shifting error phenomenon. Electrical characteristic tests are subsequently performed and microscopic observation is also carried out on the disassembled connector parts such as pins and fractured surfaces. Results: Oil contamination and swelling deformation are observed in the connector to the vehicle due to oil leakage of its counterpart connector to the transmission. This causes electrical contact failure between both connectors in the fastened state, and it is found that shifting error of the tracked vehicle could occur subsequently. To prevent the recurrence of this phenomenon, comprehensive quality improvement is conducted including product improvement of the wiring harness assembly and strengthening activities for quality control and preventive maintenance. Conclusion: This study is expected to be helpful as a prior case study for cause analysis and recurrence prevention in the event of similar cases in the future.
참고문헌 (14)
- 백현무, "1,500마력 변속기 최초생산품 내구도시험 고장원인분석", 국방품질연구논집(JDQS), 1(2), pp.68~85 (2019), 국방기술품질원[DOI]
- 최상민, "KDX-II급 함정 수직발사대 선체 균열발생에 따른 보강방안 연구", 품질경영학회지, 45(3), pp.393~402 (2017), 한국품질경영학회[DOI]
- Feng, C., "Study on the Influence of Fretting Wear on Electrical Performance of SMA Connector", Microelectronics Reliability, 118, pp.114047~ (2021)
- 장승규, "자동차용 전장 커넥트 프레팅 마모 손상 평가", 한국자동차공학회 논문집, 22(3), pp.33~41 (2014), 한국자동차공학회[DOI]
- 정재웅, "궤도차량 변속기 출력 하우징의 구조건전성 평가에 대한 연구", 한국군사과학기술학회지, 18(1), pp.8~14 (2015), 한국군사과학기술학회[DOI]
- 김보람, "수중발사체의 관성항로장치 전달정렬 영향인자 분석 및 개선방안", 품질경영학회지, 49(3), pp.245~254 (2021), 한국품질경영학회[DOI]
- 이상봉, "이종결합 고속회전 발사 탄의 비행 안정성에 결합력이 미치는 영향성 분석", 품질경영학회지, 49(3), pp.255~268 (2021), 한국품질경영학회[DOI]
- 이윤우, "수리온 주로터 블레이드 프라이머 공정변경을 통한 PU Strip 품질 향상에 관한 연구", 품질경영학회지, 47(3), pp.401~415 (2019), 한국품질경영학회[DOI]
- 임다훈, "무인기용 발사장비의 추진와이어 파단 및 구조변형 방지를 위한 형상변경 사례", 품질경영학회지, 50(3), pp.533~543 (2022), 한국품질경영학회[DOI]
- 남윤욱, "다중센서 융합을 통한 전투차량의 위치추정 성능 개선에 관한 연구", 품질경영학회지, 49(1), pp.1~15 (2021), 한국품질경영학회[DOI]
- 박진원, "한국형 전술차량 후방밴 강성·강도 보강을 통한 내구성 향상에 관한 연구", 품질경영학회지, 46(2), pp.269~282 (2018), 한국품질경영학회[DOI]
- 박종원, "궤도차량 변속기 출력 축 지지구조에 따른 베어링 수명 영향 평가에 대한 연구", 신뢰성 응용연구, 11(4), pp.331~342 (2011), 한국신뢰성학회
- Park, S., "Failure Analysis of a Planetary Gear Carrier of 1200HP Transmission", Engineering Failure Analysis, 17(2), pp.521~529 (2010)
- 신재원, "소구경화기 총열의 크롬도금 손실방지를 위한 질화 영향 사례연구", 품질경영학회지, 45(3), pp.327~334 (2017), 한국품질경영학회[DOI]