Innovative Differential Hall Effect Gap Sensor through Comparative Study for Precise Magnetic Levitation Transport System
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Three types of gap sensors, a capacitive gap sensor, an eddy current gap sensor, and a Hall effect gap sensor are described and evaluated through experiments for the purpose of precise gap sensing for micrometer scale movement, and a novel type of differential hall effect gap sensor is proposed. Each gap sensor is analyzed in terms of resolution and environment dependency including temperature dependency. Furthermore, a transport system for AMOLED deposition is introduced as a typical application of gap sensors, which are recently receiving considerable attention. Based on the analyses, the proposed differential Hall effect gap sensor is found to be the most suitable gap sensor for precise gap sensing, especially for application to a transport system for AMOLED deposition. The sensor shows resolution of 0.63 mV/μm for the overall range of the gap from 0 mm to 2.5 mm, temperature dependency of 3 μm/°C from 20°C to 30°C, and a monotonic characteristic for the gap between the sensor and the target.
Abstract
Three types of gap sensors, a capacitive gap sensor, an eddy current gap sensor, and a Hall effect gap sensor are described and evaluated through experiments for the purpose of precise gap sensing for micrometer scale movement, and a novel type of differential hall effect gap sensor is proposed. Each gap sensor is analyzed in terms of resolution and environment dependency including temperature dependency. Furthermore, a transport system for AMOLED deposition is introduced as a typical application of gap sensors, which are recently receiving considerable attention. Based on the analyses, the proposed differential Hall effect gap sensor is found to be the most suitable gap sensor for precise gap sensing, especially for application to a transport system for AMOLED deposition. The sensor shows resolution of 0.63 mV/μm for the overall range of the gap from 0 mm to 2.5 mm, temperature dependency of 3 μm/°C from 20°C to 30°C, and a monotonic characteristic for the gap between the sensor and the target.
참고문헌 (18)
- F. N. Toth, "A low-cost, smart capacitive position sensor", IEEE Trans. Instrum. Meas, 41(6), pp.1041~1044 (1992)
- X. Li, "An accurate low-cost capacitive absolute angular-position sensor with a full-circle range", IEEE Trans. Instrum. Meas, 45(2), pp.516~520 (1996)
- S. B. Field, "Capacitive position sensor with simultaneous, linear X-Y readout", Rev. Sci. Instrum, 71(6), pp.2603~2607 (2000)
- D. M. G. Preethichandra, "A simple interface circuit to measure very small capacitance changes in capacitive sensors", IEEE Trans. Instrum. Meas, 50(6), pp.1583~1586 (1996)
- Z. Ignjatovic, "An interface circuit for measuring capacitance changes based upon capacitance-toduty cycle(CDC)converter", IEEE Sensors J, 5(3), pp.403~410 (2005)
- P. Mantenuto, "Novel modified de-sauty autobalancing bridge-based analog interfaces for wide-range capacitive sensor application", IEEE Sensors J, 14(5), pp.1664~1672 (2014)
- R. Nojdelov, "Capacitive sensor interface with improved dynamic range and stability", Proc. IEEEI2MTC, pp.1373~1376 (2014)
- "Designing and building an eddy current position sensor" (1998)[URL]
- G. Y. Tian, "The research of inhomogeneity in eddy current sensors", Sens. Actuators A : Phys, 69(2), pp.148~151 (1998)
- L. Weiwen, "Research on novel grating eddy-current absolute-position sensor", IEEE Trans. Instrum. Meas, 58(10), pp.3678~3683 (2009)
- Y. S. Kim, "Displacement sensor circuit using eddy current for automobile brake", Electron. Lett, 46(22), pp.1504~1505 (2010)
- Y. Tuo, "The development of displacement eddy current sensor independent of sample electromagnetic properties", IEEE ICMET, pp.453~457 (2010)
- Ferrazzin D., "Hall Effect Sensor-Based Linear Transducer", Proc. IEEE RO-MAN, pp.219~224 (1999)
- Ting-Yu Chang, "A Hall-Sensor-Based IPM Traction Motor Drive", Proc. IEEE ISIE., 3, pp.840~843 (2002)
- Xu Zheng, "Positionmeasuring Error Analysis and Solution of Hall Sensor in Pseudo-sensorless PMSM Driving System", IEEE IECON, 2, pp.1337~1342 (2003)
- Liu Xiao, "Study of the Linear Hall-Effect Sensors Mounting Position for PMLSM", IEEE C IEA, pp.1175~1178 (2007)
- Ho Yu, "A Compact Hall-Effect-Sensing 6-DOF Precision Positioner", IEEE, 2010, pp.15(6), 982~985
- J. Boehm, "Sensors for Magnetic Bearings", IEEE Trans. Magnetics, 29(6), pp.2962~2964 (1993)