분말야금법으로 제조한 하모닉 구조재료의 신장플랜지 가공성
Stretch-Flangeability of Harmonic Structure Material Manufactured by Powder Metallurgy Method
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Harmonic structure materials are materials with a core–shell structure having a shell with a small grain size and a core with a relatively large grain size. They are in the spotlight because their mechanical properties reportedly feature strength similar to that of a sintered powder with a fine grain size and elongation similar to that of a sintered powder with a coarse grain size at the same time. In this study, the tensile properties, microstructure, and stretchflangeability of harmonic structure SUS304L made using powder metallurgy are investigated to check its suitability for automotive applications. The harmonic powders are made by mechanical milling and sintered using a spark plasma sintering method at 1173 K and a pressure of 50 MPa in a cylindrical die. The sintered powders of SUS304L having harmonic structure (harmonic SUS304L) exhibit excellent tensile properties compared with sintered powders of SUS304L having homogeneous microstructure. In addition, the harmonic SUS304L has excellent stretch-flangeability compared with commercial advanced high-strength steels (AHSSs) at a similar strength grade. Thus, the harmonic SUS304L is more suitable for automotive applications than conventional AHSSs because it exhibits both excellent tensile properties and stretch-flangeability.
Abstract
Harmonic structure materials are materials with a core–shell structure having a shell with a small grain size and a core with a relatively large grain size. They are in the spotlight because their mechanical properties reportedly feature strength similar to that of a sintered powder with a fine grain size and elongation similar to that of a sintered powder with a coarse grain size at the same time. In this study, the tensile properties, microstructure, and stretchflangeability of harmonic structure SUS304L made using powder metallurgy are investigated to check its suitability for automotive applications. The harmonic powders are made by mechanical milling and sintered using a spark plasma sintering method at 1173 K and a pressure of 50 MPa in a cylindrical die. The sintered powders of SUS304L having harmonic structure (harmonic SUS304L) exhibit excellent tensile properties compared with sintered powders of SUS304L having homogeneous microstructure. In addition, the harmonic SUS304L has excellent stretch-flangeability compared with commercial advanced high-strength steels (AHSSs) at a similar strength grade. Thus, the harmonic SUS304L is more suitable for automotive applications than conventional AHSSs because it exhibits both excellent tensile properties and stretch-flangeability.
참고문헌 (20)
- O. Kwon, , Mater. Sci. Forum, 638, pp.136~ (2010)
- R. Kuziak, , Arch. Civ. Mech. Eng., 8, pp.103~ (2008)
- A. Mayyas, , Renew. Sustainable Energy Rev., 16, pp.1845~ (2012)
- M. Ma, "Lightweight Car Body and Application of High Strength Steels", pp.187~ (2011), Springer
- N. Fonstein, "Advanced High Strength Sheet Steels: Physical Metallurgy, Design, Processing, and Properties", pp.5~ (2015), Springer
- Y. Mazaheri, , Mater. Sci. Eng. A, 619, pp.1~ (2014)
- Z. C. Li, , Mater. Sci. Eng. A, 639, pp.559~ (2015)
- B. C. D. Cooman, , Mater. Sci. Technol., 28, pp.513~ (2012)
- S. S. Sohn, , Acta Mater., 96, pp.301~ (2015)
- 손석수, "Microstructural Analysis of Cracking Phenomenon Occurring During Cold Rolling of (0.1~0.7)C-3Mn-5Al Lightweight Steels", Metals and Materials International, 21(1), pp.43~53 (2015), 대한금속·재료학회[DOI]
- A. Zargaran, "Effect of C Content on the Microstructure and Tensile Properties of Lightweight Ferritic Fe-8Al-5Mn-0.1Nb Alloy", Metals and Materials International, 21(1), pp.79~84 (2015), 대한금속·재료학회[DOI]
- K. Kamibayashi, , ISIJ Int., 52, pp.151~ (2012)
- J. Lee, , Mater. Sci. Eng. A, 536, pp.231~ (2012)
- 이주승, "980 MPa급 열연강의 신장플랜지성에 미치는템퍼드 마르텐사이트 기지조직과 입상 베이나이트 복합상의 영향", 대한금속·재료학회지, 52(2), pp.113~121 (2014), 대한금속·재료학회[DOI]
- M. Chen, , Great Designs in Steel Seminar (2008)
- Z. Zhang, , Mater. Sci. Eng. A, 598, pp.106~ (2014)
- R. Zheng, , Mater. Sci. Eng. A, 674, pp.212~ (2016)
- "ASTM E8", E8M:15a, Standard Test Methods for Tension Testing of Metallic Materials
- "ISO", TS 16630, Metallic Materials-Method of Hole Expanding Test
- J. I. Yoon, , Mater. Lett., 180, pp.322~ (2016)