철계 소결합금의 오스테나이트 안정성
Austenite Stability of Sintered Fe-based Alloy
0
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
In the present study, we investigated the austenite stability of a sintered Fe-based nanocrystalline alloy. The volume fraction of austenite was measured based on the X-ray diffraction data of sintered Fe-based nanocrystalline alloys, which were prepared by high-energy ball milling and spark plasma sintering. The sintered alloy samples showed a higher volume fraction of austenite at room temperature as compared to the equilibrium volume fraction of austenite obtained using thermodynamic calculations, which resulted from the nanosized crystalline structure of the sintered alloy. It was proved that the austenite stability of the sintered Fe-based alloy increased with a rise in the amount of austenite stabilizing elements such as Mn, Ni, and C; however, it increased more effectively with a decrease in the actual grain size. Furthermore, we proposed a new equation to predict the martensite starting temperature for sintered Fe-based alloys.
Abstract
In the present study, we investigated the austenite stability of a sintered Fe-based nanocrystalline alloy. The volume fraction of austenite was measured based on the X-ray diffraction data of sintered Fe-based nanocrystalline alloys, which were prepared by high-energy ball milling and spark plasma sintering. The sintered alloy samples showed a higher volume fraction of austenite at room temperature as compared to the equilibrium volume fraction of austenite obtained using thermodynamic calculations, which resulted from the nanosized crystalline structure of the sintered alloy. It was proved that the austenite stability of the sintered Fe-based alloy increased with a rise in the amount of austenite stabilizing elements such as Mn, Ni, and C; however, it increased more effectively with a decrease in the actual grain size. Furthermore, we proposed a new equation to predict the martensite starting temperature for sintered Fe-based alloys.
참고문헌 (21)
- J. Chipman, , Met. Trans, 3, pp.57~ (1972)
- H. K. D. H Bhadeshia, "Steels microstructure and properties" (2013), Elsevier
- G. S. Sun, , Mater. Sci. Eng. A, 709, pp.254~ (2018)
- Y. H. Kim, "Effect of Austenite on Mechanical Properties in High Manganese Austenitic Stainless Steel with Two Phase of Martensite and Austenite", Metals and Materials International, 21(3), pp.485~489 (2015), 대한금속·재료학회[DOI]
- B. C. De cooman, , Curr. Opin. Solid State Mater. Sci, 8, pp.285~ (2004)
- Y. Sakuma, , Mater. Trans. A, 22, pp.489~ (1991)
- J. Chiang, , Mater. Sci. Eng. A, 638, pp.132~ (2015)
- H. Hermawan, , Powder Metal, 51, pp.38~ (2008)
- S. J. Oh, , Arch. Metall. Mater, 64, pp.863~ (2019)
- D. Park, , Arch. Metall. Mater, 63, pp.1479~ (2018)
- V. Hays, , Nanostruct. Mater, 7, pp.411~ (1996)
- S. Lee, , Metal. Mater. Trans. A, 42, pp.3638~ (2011)
- M. Eskandari, , Mater. Sci. Eng. A, 519, pp.46~ (2009)
- S. Choi, , Arch. Metall. Mater, 65, pp.1001~ (2020)
- S. J. Oh, , Mater. Sci. Eng. A, 725, pp.382~ (2018)
- 오승진, "나노결정 FeMnNiC합금의 오스테나이트 안정성", 한국분말재료학회지, 26(5), pp.389~394 (2019), 한국분말재료학회[DOI]
- G. K. Williamson, , Acta Metall, 1, pp.22~ (1953)
- K. W. Andrews, , JISI, 203, pp.721~ (1965)
- S. J. Lee, , Metal. Mater. Trans. A, 44, pp.3423~ (2013)
- D. P. Koistinen, , Acta Metall, 7, pp.59~ (1959)
- 오승진, "Fe-7%Mn 합금의 오스테나이트 안정성에 미치는 밀링 시간과 공정제어제 첨가 효과", 한국분말재료학회지, 25(2), pp.126~131 (2018), 한국분말재료학회[DOI]