방전 플라즈마 소결로 제조된 나노결정 Fe-7wt.%Mn 합금의 오스테나이트 안정성에 미치는 Mo 첨가 효과
Effect of Mo Addition on the Austenite Stability of Nanocrystalline Fe-7wt.%Mn Alloy Fabricated by Spark Plasma Sintering
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
We investigate the austenite stability in nanocrystalline Fe-7%Mn-X%Mo (X = 0, 1, and 2) alloys fabricated by spark plasma sintering. Mo is known as a ferrite stabilizing element, whereas Mn is an austenite stabilizing element, and many studies have focused on the effect of Mn addition on austenite stability. Herein, the volume fraction of austenite in nanocrystalline Fe-7%Mn alloys with different Mo contents is measured using X-ray diffraction. Using a disk compressive test, austenite in Fe–Mn–Mo alloys is confirmed to transform into strain-induced martensite during plastic deformation by a disk d. The variation in austenite stability in response to the addition of Mo is quantitatively evaluated by comparing the k-parameters of the kinetic equation for the strain-induced martensite transformation.
Abstract
We investigate the austenite stability in nanocrystalline Fe-7%Mn-X%Mo (X = 0, 1, and 2) alloys fabricated by spark plasma sintering. Mo is known as a ferrite stabilizing element, whereas Mn is an austenite stabilizing element, and many studies have focused on the effect of Mn addition on austenite stability. Herein, the volume fraction of austenite in nanocrystalline Fe-7%Mn alloys with different Mo contents is measured using X-ray diffraction. Using a disk compressive test, austenite in Fe–Mn–Mo alloys is confirmed to transform into strain-induced martensite during plastic deformation by a disk d. The variation in austenite stability in response to the addition of Mo is quantitatively evaluated by comparing the k-parameters of the kinetic equation for the strain-induced martensite transformation.
참고문헌 (25)
- S. Yan, , Vacuum, 163, pp.194~ (2019)
- Z. C. Li, , Mater. Sci. Eng. A, 682, pp.211~ (2017)
- K. Kim, , Mater. Sci. Eng. A, 698, pp.183~ (2017)
- Y. Sakuma, , Metall. Trans. A, 22A, pp.489~ (1991)
- J. Chipman, , Metall. Trans, 3, pp.55~ (1972)
- H. K. D. H. Bhadeshia, "Steels microstructure and properties" (2013), Elsevier
- S. J. Lee, , Int. J. Mater. Res, 104, pp.423~ (2013)
- C. Keller, , Mater. Sci. Eng. A, 665, pp.125~ (2016)
- 유정한, "방전플라즈마소결법 적용 승온속도 변화에 따라 제조된 Fe-20Cu-1C 소결체 제조 및 특성평가", 한국분말재료학회지, 24(4), pp.302~307 (2017), 한국분말재료학회[DOI]
- 최승규, "철계 소결합금의 오스테나이트 안정성", 한국분말재료학회지, 27(5), pp.414~419 (2020), 한국분말재료학회
- 강요한, "Plastic Deformation Behavior of Sintered Fe-Based Alloys for Light-Weight Automotive Components", Applied Science and Convergence Technology, 23(3), pp.151~159 (2014), 한국진공학회[DOI]
- A. T. Procopio, , Mater. Sci, 38, pp.3629~ (2003)
- C. Suryanarayana, , Prog. Mater. Sci, 46, pp.1~ (2001)
- G. K. Williamson, , Acta Metall, 1, pp.22~ (1953)
- B. L. Averbach, , Trans. AIME, 196, pp.1~ (1948)
- J. Jeon, , Arch. Metall. Mater, 65, pp.1249~ (2020)
- N. Seo, , J. Powder Mater, 27, pp.373~ (2020)
- G. Kim, , Arch. Metall. Mater, 66, pp.759~ (2021)
- 김광훈, "소성유기마르텐사이트 변태에 의한 나노결정 FeCrC 소결합금의 기계적 강도 향상", 한국분말재료학회지, 28(3), pp.246~252 (2021), 한국분말재료학회
- S. Takaki, , Mater. Trans. A, 7, pp.2245~ (2004)
- S. J. Lee, , Metall. Mater. Trans. A, 44, pp.3423~ (2013)
- D. Barbier, , Adv. Eng. Mater, 16, pp.122~ (2014)
- S. Yoon, , Powder Tech, 298, pp.106~ (2016)
- F. Yin, , Scr. Mater, 155, pp.26~ (2018)
- S. J. Oh, , Mater. Sci. Eng. A, 725, pp.382~ (2018)