소성유기마르텐사이트 변태에 의한 나노결정 FeCrC 소결합금의 기계적 강도 향상
Improvement of Mechanical Properties of Nanocrystalline FeCrC Alloy via Strain-Induced Martensitic Transformation
0
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
The effect of sintering conditions on the austenite stability and strain-induced martensitic transformation of nanocrystalline FeCrC alloy is investigated. Nanocrystalline FeCrC alloys are successfully fabricated by spark plasma sintering with an extremely short densification time to obtain the theoretical density value and prevent grain growth. The nanocrystallite size in the sintered alloys contributes to increased austenite stability. The phase fraction of the FeCrC sintered alloy before and after deformation according to the sintering holding time is measured using X-ray diffraction and electron backscatter diffraction analysis. During compressive deformation, the volume fraction of strain-induced martensite resulting from austenite decomposition is increased. The transformation kinetics of the strain-induced martensite is evaluated using an empirical equation considering the austenite stability factor. The hardness of the S0W and S10W samples increase to 62.4-67.5 and 58.9-63.4 HRC before and after deformation. The hardness results confirmed that the mechanical properties are improved owing to the effects of grain refinement and strain-induced martensitic transformation in the nanocrystalline FeCrC alloy.
Abstract
The effect of sintering conditions on the austenite stability and strain-induced martensitic transformation of nanocrystalline FeCrC alloy is investigated. Nanocrystalline FeCrC alloys are successfully fabricated by spark plasma sintering with an extremely short densification time to obtain the theoretical density value and prevent grain growth. The nanocrystallite size in the sintered alloys contributes to increased austenite stability. The phase fraction of the FeCrC sintered alloy before and after deformation according to the sintering holding time is measured using X-ray diffraction and electron backscatter diffraction analysis. During compressive deformation, the volume fraction of strain-induced martensite resulting from austenite decomposition is increased. The transformation kinetics of the strain-induced martensite is evaluated using an empirical equation considering the austenite stability factor. The hardness of the S0W and S10W samples increase to 62.4-67.5 and 58.9-63.4 HRC before and after deformation. The hardness results confirmed that the mechanical properties are improved owing to the effects of grain refinement and strain-induced martensitic transformation in the nanocrystalline FeCrC alloy.
참고문헌 (38)
- H. K. D. H. Bhadeshia, , Prog. Mater. Sci, 57, pp.268~ (2012)
- H. Nakashima, , NTN Tech. Rev, 76, pp.10~ (2008)
- E. Yajima, , Trans. JIM, 15, pp.173~ (1974)
- D. S. Park, , Arch. Metall. Mater, 63, pp.1479~ (2018)
- J. Talonen, , Metall. Trans. A, 36, pp.421~ (2005)
- J. Jeon, , Arch. Metall. Mater, 65, pp.1249~ (2020)
- S. J. Oh, , Mater. Sci. Eng. A, 725, pp.382~ (2018)
- O. Grassel, , Int. J. Plast, 16, pp.1391~ (2000)
- S. J. Oh, , Arch. Metall. Mater, 64, pp.863~ (2019)
- P. Jacques, , Metall. Mater. Trans. A, 32, pp.2759~ (2001)
- 김영무, "탄탈륨 및 탄탈륨-텅스텐 합금 분말의 소결성 및 미세조직 연구", 한국분말재료학회지, 27(5), pp.373~380 (2020), 한국분말재료학회
- S. Lee, , Scr. Mater, 65, pp.225~ (2011)
- 유정한, "방전플라즈마소결법 적용 승온속도 변화에 따라 제조된 Fe-20Cu-1C 소결체 제조 및 특성평가", 한국분말재료학회지, 24(4), pp.302~307 (2017), 한국분말재료학회[DOI]
- C. Keller, , Mater. Sci. Eng. A, 665, pp.125~ (2016)
- Seung-Jin Oh, "Microstructure and Mechanical Properties of Highly Alloyed FeCrMoVC Steel Fabricated by Spark Plasma Sintering", Metals and Materials International, 24(3), pp.597~603 (2018), 대한금속·재료학회[DOI]
- O. E. Falodun, , Met. Mater. Int, 28, pp.1~ (2019)
- G. Kim, , Arch. Metall. Mater, 66, pp.759~ (2021)
- G. K. Williamson, , Acta Metall, 1, pp.22~ (1953)
- C. Suryanarayana, , Prog. Mater. Sci, 46, pp.1~ (2001)
- 이용희, "Fe-TiC 복합재료분말의 방전플라즈마소결", 한국분말재료학회지, 21(5), pp.382~388 (2014), 한국분말재료학회
- B. L. Averbach, , Trans. AIME, 196, pp.1~ (1948)
- G. B. Olson, , Metall. Trans. A,, 6A, pp.791~ (1975)
- J. Burke, (1965), Pergamon Press
- O. Matsumura, , Scr. Mater, 21, pp.1301~ (1987)
- N. Tsuchida, , Mater. Sci. Eng. A, 285, pp.345~ (2000)
- D. Krizan, , Steel Res. Int, 79, pp.513~ (2008)
- L. Samek, , Metall. Mater. Trans. A, 37A, pp.109~ (2006)
- S. J. Lee, , Int. J. Mater. Res, 104, pp.423~ (2013)
- Abderrahim Bouziane, "Analysis of cutting forces and roughness during hard turning of bearing steel", Structural Engineering and Mechanics, An Int＇l Journal, 66(3), pp.285~294 (2018), 국제구조공학회
- K. Hokkirigawa, , Wear, 123, pp.241~ (1988)
- J. Zhao, , Mater. Sci. Eng. A, 628, pp.327~ (2015)
- Mohamed Walid Azizi, "Surface roughness and cutting forces modeling for optimization of machining condition in finish hard turning of AISI 52100 steel", Journal of Mechanical Science and Technology, 26(12), pp.4105~4114 (2012), 대한기계학회
- S. Li, , Wear, 380-381, pp.146~ (2017)
- R. Ramesh, , Mater. Des, 28, pp.1447~ (2007)
- X. H. Lu, , Mater. Lett, 234, pp.5~ (2019)
- S. J. Lee, , ISIJ. Int, 53, pp.1902~ (2013)
- 오승진, "나노결정 FeMnNiC합금의 오스테나이트 안정성", 한국분말재료학회지, 26(5), pp.389~394 (2019), 한국분말재료학회[DOI]
- J. R. Weertman, , Mater. Sci. Eng. A, 166, pp.161~ (1993)