밀링 조건이 고엔트로피 합금의 미세조직 및 기계적 특성에 미치는 영향
Influence of Milling Conditions on the Microstructural Characteristics and Mechanical Properties of Non-equiatomic High Entropy Alloy
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
High-entropy alloys have excellent mechanical properties under extreme environments, rendering them promising candidates for next-generation structural materials. It is desirable to develop non-equiatomic high-entropy alloys that do not require many expensive or heavy elements, contrary to the requirements of typical high-entropy alloys. In this study, a non-equiatomic high-entropy alloy powder Fe49.5Mn30Co10Cr10C0.5 (at.%) is prepared by high energy ball milling and fabricated by spark plasma sintering. By combining different ball milling times and ball-topowder ratios, we attempt to find a proper mechanical alloying condition to achieve improved mechanical properties. The milled powder and sintered specimens are examined using X-ray diffraction to investigate the progress of mechanical alloying and microstructural changes. A miniature tensile specimen after sintering is used to investigate the mechanical properties. Furthermore, quantitative analysis of the microstructure is performed using electron backscatter diffraction.
Abstract
High-entropy alloys have excellent mechanical properties under extreme environments, rendering them promising candidates for next-generation structural materials. It is desirable to develop non-equiatomic high-entropy alloys that do not require many expensive or heavy elements, contrary to the requirements of typical high-entropy alloys. In this study, a non-equiatomic high-entropy alloy powder Fe49.5Mn30Co10Cr10C0.5 (at.%) is prepared by high energy ball milling and fabricated by spark plasma sintering. By combining different ball milling times and ball-topowder ratios, we attempt to find a proper mechanical alloying condition to achieve improved mechanical properties. The milled powder and sintered specimens are examined using X-ray diffraction to investigate the progress of mechanical alloying and microstructural changes. A miniature tensile specimen after sintering is used to investigate the mechanical properties. Furthermore, quantitative analysis of the microstructure is performed using electron backscatter diffraction.
참고문헌 (21)
- J. W. Yeh, , JOM, 65, pp.1759~ (2013)
- E. P. George, , Acta Mater, 188, pp.435~ (2020)
- D. B. Miracle, , Acta Mater, 122, pp.448~ (2017)
- Z. Li, , JOM, 69, pp.2099~ (2017)
- Z. Li, , Sci. Rep, 7, pp.40704~ (2017)
- 김영무, "탄탈륨 및 탄탈륨-텅스텐 합금 분말의 소결성 및 미세조직 연구", 한국분말재료학회지, 27(5), pp.373~380 (2020), 한국분말재료학회
- 이민재, "Development of Carbon Nanotube-copper Hybrid Powder as Conductive Additive", 한국분말재료학회지, 25(4), pp.291~295 (2018), 한국분말재료학회[DOI]
- Seungjin Nam, "Effect of Powder Morphology and Chemical Distribution on Properties of Multicomponent Alloys Produced Via Powder Metallurgy", Metals and Materials International, 26(9), pp.1385~1393 (2020), 대한금속·재료학회[DOI]
- 권대현, "페라이트", 마르텐사이트계 산화물분산강화강의 미세조직 및 샤르피 충격특성에 미치는 코발트 함량의 영향, 2020, pp.27(4), 311~317[DOI]
- C. Suryanarayana, , Porg. Mater. Sci, 46, pp.1~ (2001)
- S. J. Oh, , Mater. Sci. Eng. A, 725, pp.382~ (2018)
- J. Jeon, , Arch. Metall. Mater, 65, pp.1249~ (2020)
- N. Seo, , Arch. Metall. Mater, 65, pp.1005~ (2020)
- D. P. Xiang, , J. Alloys Compd, 562, pp.19~ (2013)
- 최승규, "철계 소결합금의 오스테나이트 안정성", 한국분말재료학회지, 27(5), pp.414~419 (2020), 한국분말재료학회
- Y. Matsuoka, , ISIJ Int, 53, pp.1224~ (2013)
- Z. Nasiri, , Met. Mater. Int. (2020)
- S. J. Lee, , Int. J. Mater. Res, 104, pp.423~ (2013)
- S. J. Lee, , Mater. Sci. Forum, 475-479, pp.3169~ (2005)
- L. Zhang, , Vacuum, 122, pp.187~ (2015)
- M. B. Shongwe, , J. Alloys Compd, 649, pp.824~ (2015)