기계적 합금화를 이용한 Al0.75V2.82CrZr 내화 고엔트로피 합금의 경량화 및 고온 열안정성 연구
Thermal Stability and Weight Reduction of Al0.75V2.82CrZr Refractory High Entropy Alloy Prepared Via Mechanical Alloying
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
High-entropy alloys (HEAs) are characterized by having five or more main elements and forming simple solids without forming intermetallic compounds, owing to the high entropy effect. HEAs with these characteristics are being researched as structural materials for extreme environments. Conventional refractory alloys have excellent hightemperature strength and stability; however, problems occur when they are used extensively in a high-temperature environment, leading to reduced fatigue properties due to oxidation or a limited service life. In contrast, refractory entropy alloys, which provide refractory properties to entropy alloys, can address these issues and improve the hightemperature stability of the alloy through phase control when designed based on existing refractory alloy elements. Refractory high-entropy alloys require sufficient milling time while in the process of mechanical alloying because of the brittleness of the added elements. Consequently, the high-energy milling process must be optimized because of the possibility of contamination of the alloyed powder during prolonged milling. In this study, we investigated the hightemperature oxidation behavior of refractory high-entropy alloys while optimizing the milling time.
Abstract
High-entropy alloys (HEAs) are characterized by having five or more main elements and forming simple solids without forming intermetallic compounds, owing to the high entropy effect. HEAs with these characteristics are being researched as structural materials for extreme environments. Conventional refractory alloys have excellent hightemperature strength and stability; however, problems occur when they are used extensively in a high-temperature environment, leading to reduced fatigue properties due to oxidation or a limited service life. In contrast, refractory entropy alloys, which provide refractory properties to entropy alloys, can address these issues and improve the hightemperature stability of the alloy through phase control when designed based on existing refractory alloy elements. Refractory high-entropy alloys require sufficient milling time while in the process of mechanical alloying because of the brittleness of the added elements. Consequently, the high-energy milling process must be optimized because of the possibility of contamination of the alloyed powder during prolonged milling. In this study, we investigated the hightemperature oxidation behavior of refractory high-entropy alloys while optimizing the milling time.
참고문헌 (36)
- J. W. Yeh, , Adv. Eng. Mater, 6, pp.299~ (2004)
- Y. Zhang, , Prog. Mater. Sci, 61, pp.1~ (2014)
- B. Cantor, , Mater. Sci. Eng. A, 375-377, pp.213~ (2004)
- Myoung Jin Chae, "Lightweight AlCuFeMnMgTi High Entropy Alloy with High Strength-to-Density Ratio Processed by Powder Metallurgy", Metals and Materials International, 27(4), pp.629~638 (2021), 대한금속·재료학회[DOI]
- W. R. Wang, , Intermetallics, 26, pp.44~ (2012)
- A. Sharma, , Mater. Sci. Eng. A, 797, pp.140066~ (2020)
- M. J. Chae, , Powder Metall, 64, pp.228~ (2021)
- Ashutosh Sharma, "Effect of Additive Elements (x = Cr, Mn, Zn, Sn) on the Phase Evolution and Thermodynamic Complexity of AlCuSiFe-x High Entropy Alloys Fabricated via Powder Metallurgy", Metals and Materials International, 28(9), pp.2216~2224 (2022), 대한금속·재료학회[DOI]
- M. C. Oh, , Intermetallics, 139, pp.107369~ (2021)
- J. Wang, , J. Nucl. Mater, 552, pp.153006~ (2021)
- H. Lee, , J. Alloy Compd, 947, pp.169545~ (2023)
- N. R. Philips, , Metall. Mater. Trans. A, 51, pp.3299~ (2020)
- T. Zhang, , J. Mater. Sci. Technol, 52, pp.29~ (2020)
- O. N. Senkov, , Acta Mater, 175, pp.394~ (2019)
- 김영무, "탄탈륨 및 탄탈륨-텅스텐 합금 분말의 소결성 및 미세조직 연구", 한국분말재료학회지, 27(5), pp.373~380 (2020), 한국분말재료학회
- 강유빈, "유무기 하이브리드 티타늄 착화합물을 이용한 티타니아의 제조 방법 및 성장 거동에 대한 연구", 한국분말재료학회지, 26(6), pp.487~492 (2019), 한국분말재료학회[DOI]
- 최원준, "차세대 초고온 합금인 Mo-Si-B 합금의 연구 동향", 한국분말재료학회지, 26(2), pp.156~165 (2019), 한국분말재료학회[DOI]
- A. Ferrari, , Phys. Rev. Mater, 5, pp.063606~ (2021)
- W. Lai, , Mater. Res. Lett, 10, pp.133~ (2022)
- P. Jéhanno, , Metall. Mater. Trans. A, 36, pp.515~ (2005)
- M. C. Gao, , JOM, 67, pp.2653~ (2015)
- S. Wei, , Nat. Mater, 19, pp.1175~ (2020)
- J. Zhou, , Int. J. Refract. Hard Met, 105, pp.105836~ (2022)
- A. B. Melnick, , J. Alloys Compd, 694, pp.223~ (2017)
- M. Wu, , Mater. Sci. Eng. A, 842, pp.143112~ (2022)
- Z. Wang, , J. Mater. Sci. Technol, 151, pp.41~ (2023)
- Jiaojiao Yi, "Equiatomic, Cu‐Containing CrCuFeTiV 3d Transition Metal High Entropy Alloy with an Enhanced Strength and Hardness Synergy", Metals and Materials International, 28(1), pp.227~236 (2022), 대한금속·재료학회[DOI]
- H. Lee, , Wear, 530-531, pp.205011~ (2023)
- C. Park, , J. Hazard. Mater, 440, pp.129825~ (2022)
- B. Kang, , J. Alloys Compd, 767, pp.1012~ (2018)
- J. A. Smeltzer, , Mater. Des, 210, pp.110070~ (2021)
- C. M. Liu, , J. Alloys Compd, 583, pp.162~ (2014)
- J. Han, , Scr. Mater, 57, pp.825~ (2007)
- C. E. Aumann, , J. Vac. Sci, 13, pp.1178~ (1995)
- D. J. Young, , J. Electrochem. Soc, 124, pp.769~ (1977)
- M. Wang, , Mater. Sci. Eng. A, 808, pp.140848~ (2021)