그래핀 원스텝 전사(Graphene One-Step Transfer) 공정 기반 다층 그래핀 잔여분말 제거 기술 연구
A Study on Residual Powder Removing Technique of Multi-Layered Graphene Based on Graphene One-Step Transfer Process
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
In this study, a method to remove residual powder on a multi-layered graphene and a new approach to transfer multi-layered graphene at once are studied. A graphene one-step transfer (GOST) method is conducted to minimize the residual powder comparison with a layer-by-layer transfer. Furthermore, a residual powder removing process is investigated to remove residual powder at the top of a multi-layered graphene. After residual powder is removed, the sheet resistance of graphene is decreased from 393 to 340 Ohm/sq in a four-layered graphene. In addition, transmittance slightly increases after residual powder is removed from the top of the multi-layered graphene. Optical and atomic-force microscopy images are used to analyze the graphene surface, and the Ra value is reduced from 5.2 to 3.7 nm following residual powder removal. Therefore, GOST and residual powder removal resolve the limited application of graphene electrodes due to residual powder.
Abstract
In this study, a method to remove residual powder on a multi-layered graphene and a new approach to transfer multi-layered graphene at once are studied. A graphene one-step transfer (GOST) method is conducted to minimize the residual powder comparison with a layer-by-layer transfer. Furthermore, a residual powder removing process is investigated to remove residual powder at the top of a multi-layered graphene. After residual powder is removed, the sheet resistance of graphene is decreased from 393 to 340 Ohm/sq in a four-layered graphene. In addition, transmittance slightly increases after residual powder is removed from the top of the multi-layered graphene. Optical and atomic-force microscopy images are used to analyze the graphene surface, and the Ra value is reduced from 5.2 to 3.7 nm following residual powder removal. Therefore, GOST and residual powder removal resolve the limited application of graphene electrodes due to residual powder.
참고문헌 (18)
- 홍순규, "탄소나노튜브 길이 변화에 대한 확산방지층과 박막 증착 온도의 영향", 한국분말재료학회지, 24(3), pp.248~253 (2017), 한국분말재료학회[DOI]
- A. K. Geim, , Science, 324, pp.1530~ (2009)
- X. Li, , Science, 324, pp.1312~ (2009)
- Z. S. Wu, , ACS Nano, 3, pp.411~ (2009)
- X. Liu, , Crystals, 3, pp.79~ (2013)
- K. S. Kim, , Nature, 457, pp.706~ (2009)
- F. Xia, , Nano Lett, 10, pp.715~ (2010)
- P. Blake, , Appl. Phys. Lett, 91, pp.91~ (2007)
- D. Li, , Nature Nanotech, 3, pp.101~ (2008)
- A. Reina, , Nano Lett, 9, pp.30~ (2009)
- P. R. Kidambi, , Nano Lett, 13, pp.4769~ (2013)
- J. Kang, , Nanoscale, 4, pp.5527~ (2012)
- B. H. Son, , Sci. Rep, 7, pp.18058~ (2017)
- H. Park, , Nano Lett, 12, pp.133~ (2012)
- T. Uwanno, , 2D Materials, 2, pp.1~ (2015)
- M. S. Dresselhaus, , Nano Lett, 10, pp.751~ (2010)
- F. M. Smits, , Bell System Technical Journal, 37, pp.711~ (1958)
- L. M. Malard, , Phys. Rep, 473, pp.51~ (2009)